10-10-2018
I have no experience with boot from SAN on metal, to put a small disclaimer upfront.
Not related to the problem...what would really help you is to have a separated installed operating system on both environments (DCs), with data part replicated in separate volume groups.
That way, only thing you do is import the volume group and (possibly or not depends) an ip assignment, depending on the topology and services such as vrrp or higher layer used.
I never endorsed SAN boot on metal personally (but in vms of course), always had couple of local disks to mirror ...
Point being, i would go with service separation and clean install on each of the sites, while cloning data part via storage methods.
Hopefully someone else who used linux SAN boot will be of more assistance with the actual problem.
Regards
Peasant.
This User Gave Thanks to Peasant For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
I have solaris 10 sparc. I installed a Qlogic hba card.
This card is connected on a brocade switch and the brocade is connected on 2 different controllers on a Hitachi disk bay.
I formated 2 luns. On my solaris system, i have 4 disk.
How to configure solaris 10 to fix the dual disk view.
... (4 Replies)
Discussion started by: simquest
4 Replies
2. Solaris
Hi,
I saw your post on the forums about how to setup IP multipathing. I wanted your help on the below situation .
I have 2 servers A and B . Now they should be connected to 2 network switches . S1 and S2.
Now is it possible to have IP Multipathing on each of the servers as follows ?
... (0 Replies)
Discussion started by: maadhuu
0 Replies
3. Solaris
Hai
we using emc storage which is conneted to M5000 through san switch.
we asign 13 luns but in server it is showing 22 luns.
i enable the solaris multipathing (MPxIO)
#more /kernel/drv/fp.conf in that file
MPxio-disable=no
#mpathadm list lu
it shows ... (2 Replies)
Discussion started by: joshmani
2 Replies
4. Solaris
Hello,
I turned on the server multipathing:
# uname -a
SunOS caiman 5.10 Generic_141444-09 sun4v sparc SUNW,T5140
stmsboot -D fp -e
And after a reboot the server, multipathing is not enable:
# stmsboot -L
stmsboot: MPxIO is not enabled
stmsboot: MPxIO disabled
# ls /dev/dsk... (4 Replies)
Discussion started by: bieszczaders
4 Replies
5. UNIX for Dummies Questions & Answers
Hello,
I'm trying to put puppy linux 4.2.1 (I can't use the latest because it won't boot on my hardware) on a grub2'd usb drive.
It throws the error that it can't find pup_421.sfs
Here is my /boot/grub/grub.cfg
menuentry "Puppy 4.2.1" {
loopback loop... (2 Replies)
Discussion started by: Narnie
2 Replies
6. Debian
Hello, firstly excuse for my poor english.
I have a busybox error when I try to run Debian 6. It's like Grub cannot find root (initramfs)
My system is:
- RAID0 with dmraid
- /boot ext2 (from moonOS installation --ubuntu based--)
- ext4 (moonOS wich have the Grub2 installation, where I... (0 Replies)
Discussion started by: neutralTTY
0 Replies
7. Linux
I got a dual boot with grub2, but everytime I turn on the computer and the booter is loaded, I can't handle the menu, so I am forced to wait the countdown and choose the default option.
I'd really like to know why!
This is my grub.cfg,
# # DO NOT EDIT THIS FILE # # It is automatically... (0 Replies)
Discussion started by: Luke Bonham
0 Replies
8. Red Hat
Hello
This is happening on: 3.13.7-200.fc20.x86_64
This happened already some weeks ago, until now i didn install linunx onto this machine, as i had to turn in the laptop to the service center so they could fix the UEFI flash storage.
Either way, its happening again. as i installed Fedora 20... (1 Reply)
Discussion started by: sea
1 Replies
9. Red Hat
I have a couple of questions regarding multipath.
If I do vgdisplay vg01, I see it is using 1 PV: /dev/dm-13
If I type multipath -ll I see dm-9, dm-10, dm-11, dm-12, but do not see dm-13. Is my vg01 multipathed? How can I actually know for sure?
Secondly, let's say this time vg01 says... (1 Reply)
Discussion started by: keelba
1 Replies
10. UNIX for Beginners Questions & Answers
I have centos 7 gui installed on vmware workstation12 on my laptop.WhenI want to pause my splash screen while starting my centos 7 using the 'esc key' nothing happens and the system just boots up.I also see a entry for aci_memory_fail... entry during the boot process.help me fix the system. (1 Reply)
Discussion started by: sabsac
1 Replies
LEARN ABOUT OSX
net::dns::question
Net::DNS::Question(3) User Contributed Perl Documentation Net::DNS::Question(3)
NAME
Net::DNS::Question - DNS question record
SYNOPSIS
use Net::DNS::Question;
$question = new Net::DNS::Question('example.com', 'A', 'IN');
DESCRIPTION
A Net::DNS::Question object represents a record in the question section of a DNS packet.
METHODS
new
$question = new Net::DNS::Question('example.com', 'A', 'IN');
$question = new Net::DNS::Question('example.com');
$question = new Net::DNS::Question('192.0.32.10', 'PTR', 'IN');
$question = new Net::DNS::Question('192.0.32.10');
Creates a question object from the domain, type, and class passed as arguments. One or both type and class arguments may be omitted and
will assume the default values shown above.
RFC4291 and RFC4632 IP address/prefix notation is supported for queries in both in-addr.arpa and ip6.arpa namespaces.
decode
$question = decode Net::DNS::Question($data, $offset);
($question, $offset) = decode Net::DNS::Question($data, $offset);
Decodes the question record at the specified location within a DNS wire-format packet. The first argument is a reference to the buffer
containing the packet data. The second argument is the offset of the start of the question record.
Returns a Net::DNS::Question object and the offset of the next location in the packet.
An exception is raised if the object cannot be created (e.g., corrupt or insufficient data).
encode
$data = $question->encode( $offset, $hash );
Returns the Net::DNS::Question in binary format suitable for inclusion in a DNS packet buffer.
The optional arguments are the offset within the packet data where the Net::DNS::Question is to be stored and a reference to a hash table
used to index compressed names within the packet.
qname, zname
$qname = $question->qname;
$zname = $question->zname;
Returns the question name attribute. In dynamic update packets, this attribute is known as zname() and refers to the zone name.
qtype, ztype
$qtype = $question->qtype;
$ztype = $question->ztype;
Returns the question type attribute. In dynamic update packets, this attribute is known as ztype() and refers to the zone type.
qclass, zclass
$qclass = $question->qclass;
$zclass = $question->zclass;
Returns the question class attribute. In dynamic update packets, this attribute is known as zclass() and refers to the zone class.
print
$object->print;
Prints the record to the standard output. Calls the string() method to get the string representation.
string
print "string = ", $question->string, "
";
Returns a string representation of the question record.
COPYRIGHT
Copyright (c)1997-2002 Michael Fuhr.
Portions Copyright (c)2002-2004 Chris Reinhardt.
Portions Copyright (c)2003,2006-2011 Dick Franks.
All rights reserved.
This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself.
SEE ALSO
perl, Net::DNS, Net::DNS::DomainName, Net::DNS::Packet, RFC 1035 Section 4.1.2
perl v5.16.2 2012-01-27 Net::DNS::Question(3)