Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: X Forwarding issue on Solaris 11
Top Forums Shell Programming and Scripting X Forwarding issue on Solaris 11 Post 303024051 by ajayram_arya on Thursday 27th of September 2018 02:51:08 PM
Old 09-27-2018
X Forwarding issue on Solaris 11
Hello All , Need assistance in finding out a solution for X Forwarding issue

IBM applications requires X Forwarding . Server X11 works fine when i try xclock but not this application . On a different server with the same OS it is working . Need inputs .

OS Version : Solaris 11 with updated patches .

Error
Code:
The program 'IBMIM' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadValue (integer parameter out of range for operation)'.
  (Details: serial 46 error_code 2 request_code 147 minor_code 4)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)
The program 'IBMIM' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadValue (integer parameter out of range for operation)'.
  (Details: serial 46 error_code 2 request_code 147 minor_code 4)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)

 

10 More Discussions You Might Find Interesting

1. Cybersecurity

ssh X-forwarding and remote forwarding behind proxy

Hi, from my workplace we use a proxy to connect to the outside world, including external ssh servers. The problem is that the server is seeing the connection coming from the proxy and knows nothing about the client behind it. The ssh connection itself works fine, but x-forwarding does not work as... (1 Reply)
Discussion started by: vampirodolce
1 Replies

2. Solaris

Port/IP Forwarding in Solaris 10.0

Hi, I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200 to corresponding ports of server 10.2.45.197. I am using Solaris 10.0. -bash-3.00$ uname -a SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445 Is... (6 Replies)
Discussion started by: vikas027
6 Replies

3. Solaris

Solaris Issue

Hi, I am having a serious problem with a Solaris 2.6 box. Whenever I try and tar a large directory I get this error:tar: write error: unexpected EOF My own research shows that I might have to enable tarring large files by this command: fsadm -o largefiles <mountpoint> My box does not... (8 Replies)
Discussion started by: mojoman
8 Replies

4. Solaris

ip and port forwarding in Solaris 10

Hi; I have the following issue: I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Discussion started by: ppereira
0 Replies

5. Solaris

du -sh issue in solaris 10

i have 30 file systems on my production system and my system is responding too slow and / is 99% full is there any way i can run the du -sh only on root file systems and skip all the SAN file systems as the system is unable to do du -sdh * / as it would try to run du on all the SAN/NAS file... (5 Replies)
Discussion started by: fugitive
5 Replies

6. Solaris

IP Forwarding on Solaris 10 (should be simple, but isn't!)

I'm having a hard time getting IP forwarding to work. I'll eventually have several interfaces, but all that matters for now is that two of them actually be able to IP forward. I have no network interfaces in the global zone, but both interfaces are in the same zone, Common. The IPs I've been... (0 Replies)
Discussion started by: cfalcon
0 Replies

7. IP Networking

NAT Forwarding Issue Endian and Vyatta Firewall

I've experienced this same issue with both the Endian Firewall Appliance and a Vyatta Firewall Appliance. Conversely, it works with a Draytek Firewall/Router. I am trying to forward port 80 traffic to my internal web server which is located on the /24 subnet. I have an external static IP which... (0 Replies)
Discussion started by: mboudro
0 Replies

8. Solaris

Vi issue with solaris

I'm facing a peculiar issue when using vi on solaris. When i open a file using vi & search for a string pattern & if that pattern is not found & if i exit, vi exits with return value 1. (Checked the return value with 'echo $?' ). When the string is found, vi exits with return value 0. This... (9 Replies)
Discussion started by: pj87
9 Replies

9. IP Networking

Port forwarding issue

hi guys i have a simple question ! i have two ips . a valid and internal(172.16.11.2) i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 . i use this rule : sysctl -w net.ipv4.ip_forward=1 iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Discussion started by: mhs
1 Replies

10. Emergency UNIX and Linux Support

Proxmox dedicated Port forwarding issue Using Default Drop Chain filter

Hi Everyone, Hope all Doing good, we have a Dedicated server and its installed with proxmox VE 3.2, My Need is i want Protect my server and only i need to allow the specific port in the server, And i want to forward some of ports 22,80,443 to those VM's inside my dedicated... (0 Replies)
Discussion started by: babinlonston
0 Replies

LEARN ABOUT LINUX

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)
All times are GMT -4. The time now is 01:39 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy