Sponsored Content
Full Discussion: Unable to connect ASMI
Operating Systems AIX Unable to connect ASMI Post 303023927 by bakunin on Tuesday 25th of September 2018 04:31:26 PM
Old 09-25-2018
Quote:
Originally Posted by filosophizer
2- Cross Cable : May be that will work (just informing you, it was working with straight cable,
I should have paid more attention to the model number: older models needed a crossover cable, newer ones don't (or, more correctly: don't care - they work with both). As it worked with a normal cable the first time your hardware is obviously new enough to ve able to use both, so the cable is not the problem.

I hope this helps.

bakunin
 

10 More Discussions You Might Find Interesting

1. HP-UX

Unable to connect to HP-UX 11.11 via eXceed 7.1

Hello HP-UX Gurus, I am having issues trying to start an x-session via eXceed 7.1. When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up. I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Discussion started by: smokie
2 Replies

2. Solaris

Unable to connect to Internet

Hi friends recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Discussion started by: srinivas2828
6 Replies

3. Emergency UNIX and Linux Support

Unable to connect using SFTP

I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one. I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Discussion started by: ggayathri
7 Replies

4. AIX

Asmi errors

Hi friends How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me raj (0 Replies)
Discussion started by: senmak
0 Replies

5. AIX

Unable to connect VIO client

Hi I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct. i have rebooted and reconfigured the ip address, but issue is persists. Kindly suggest how to... (0 Replies)
Discussion started by: manoj.solaris
0 Replies

6. HP-UX

Unable to connect SSH from HP-UX

Hi, I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs: > /usr/local/bin/ssh2 -v -l testuser 10.10.10.10 debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Discussion started by: ysafi
4 Replies

7. Shell Programming and Scripting

Unable to connect to SQL through unix

I am trying to connect to SQL plus through unix but i am getting below error 'ksh: sqlplus: not found' note i am running this from /home/xxx do i need to set any environmental variable for this. below is my code echo " hello world" sqlplus -s apps/CAF78GEN<<EOF set heading... (4 Replies)
Discussion started by: karnatis
4 Replies

8. Red Hat

Unable to connect Wireless

I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at: wiki.centos.org/HowTos/Laptops/Wireless/Broadcom I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies

9. Red Hat

Unable to connect to internet

Hello, I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news ! Now bad news or not so great news. My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies

10. Solaris

Unable to connect using ftp

hi I am having issues when trying to connect using ftp, I am having the following error: User (10.100.48.73:(none)): moz 331 Password required for moza. Password: 530 Login incorrect. Login failed. ftp> by 221 Goodbye. I have created a user like this: useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
NEWAPC(8)						      Network UPS Tools (NUT)							 NEWAPC(8)

NAME
newapc - Driver for American Power Conversion Smart Protocol UPS equipment NOTE
This man page only documents the hardware-specific features of the newapc driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
newapc should recognize all recent APC models that use a serial protocol at 2400 bps. This is primarily the Smart-UPS, Matrix-UPS and Back-UPS Pro lines. Older APC models may work better with the apcsmart driver. The driver attempts to support every bell and whistle of the APC reporting interface, whether or not this is strictly sensible. Some older hardware may only report a handful of variables. This is usually not a bug - they just don't support anything else. CABLING
This driver expects to see a 940-0024C cable or a clone by default. You can switch to the 940-0095B dual-mode cable support with the cable= definition described below. If your 940-0024C cable is broken or missing, use this diagram to build a clone: http://www.exploits.org/nut/library/cables/940-0024C.jpg EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5): cable=940-0095B Configure the serial port for the APC 940-0095B dual-mode cable. sdtype=num Use shutdown type num, according to this table: 0: soft shutdown or powerdown, depending on battery status 1: soft shutdown followed by powerdown 2: instant power off 3: power off with grace period Modes 0 and 1 will power up the load when power returns. Modes 2 and 3 will keep the load turned off when the power returns. BUGS
Some older APC UPS models return bogus data in the status register during a front panel test. This is usually detected and discarded, but some other unexpected values have occasionally slipped through. AUTHOR
Nigel Metheringham <Nigel.Metheringham@Intechnology.co.uk> (drawing heavily on the apcsmart driver by Russell Kroll). SEE ALSO
The core driver: nutupsdrv(8) The apcsmart driver: apcsmart(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/ NUT mailing list archives and information: http://lists.exploits.org/ Tue Oct 22 2002 NEWAPC(8)
All times are GMT -4. The time now is 02:27 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy