09-25-2018
Quote:
Originally Posted by
bakunin
I'd say the IVM awaits the interface to be where you are trying to find them. But it is not any more successful in that venture than you are. Therefore, eliminate all possible problems and connect directly to the system with a cross-over cable as suggested. That is a sure-fire method and if this fails the box is a case for the technician.
I hope this helps.
bakunin
Thanks, I have to try two things:
1- Reset Toggle which is on the board (not tried yet)
2- Cross Cable : May be that will work (just informing you, it was working with straight cable, then i reconfigured the deconfigured memory and then stopped connecting to ASMI via browser)
10 More Discussions You Might Find Interesting
1. HP-UX
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Discussion started by: smokie
2 Replies
2. Solaris
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Discussion started by: srinivas2828
6 Replies
3. Emergency UNIX and Linux Support
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Discussion started by: ggayathri
7 Replies
4. AIX
Hi friends
How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me
raj (0 Replies)
Discussion started by: senmak
0 Replies
5. AIX
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Discussion started by: manoj.solaris
0 Replies
6. HP-UX
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Discussion started by: ysafi
4 Replies
7. Shell Programming and Scripting
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
Discussion started by: karnatis
4 Replies
8. Red Hat
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies
9. Red Hat
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies
10. Solaris
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
IE(4) BSD/i386 Kernel Interfaces Manual IE(4)
NAME
ie -- Ethernet device driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device ie
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_ie_load="YES"
In /boot/device.hints:
hint.ie.0.at="isa"
hint.ie.0.port="0x300"
hint.ie.0.irq="5"
hint.ie.0.maddr="0xd0000"
HARDWARE
The ie driver provides supports the following 8 and 16bit ISA Ethernet cards that are based on the Intel i82586 chip:
o 3COM 3C507
o AT&T EN100
o AT&T Starlan 10
o AT&T Starlan Fiber
o Intel EtherExpress 16
o RACAL Interlan NI5210
DIAGNOSTICS
ie%d: unknown board type code %d An i82586 chip was found, but the driver was unable to determine the actual board type during the probe.
ie%d: kernel configured maddr %x doesn't match board configured maddr %x The device probe detected a different maddr than the one specified
in the kernel configuration file.
ie%d: can't find shared memory The device probe could not access the shared memory to determine its size.
ie%d: kernel configured msize %d doesn't match board configured msize %d The device probe found a different size for the shared memory than
the one specified in the kernel configuration file.
ie%d: kernel configured irq %d doesn't match board configured irq %d The device probe detected that the board is configured for a different
interrupt than the one specified in the kernel configuration file.
ie%d: reset The Intel i82586 had to be reset by the driver.
ie%d: transceiver problem The driver has detected a problem with the Ethernet transceiver. This is usually due to a loose or broken trans-
ceiver cable when using an external transceiver. When you experience this problem with an on-card transceiver your card may be incorrectly
jumpered for to use an external transceiver. Worst case your on-board transceiver may be broken.
ie%d: TDR detected an open %d clocks away The driver detected an open circuit in the Ethernet cable. Check your coax cable and terminator
resistors.
ie%d: TDR detected a short %d clocks away The driver detected a short circuit in the Ethernet cable. Check your coax cable and terminator
resistors.
ie%d: TDR returned unknown status %x The driver got an unknown status from the card during the Ethernet cable test.
ie%d: multicast address setup command failed The card could not be put into multicast mode.
ie%d: configure command failed The card refused to respond correctly during configuration.
ie%d: individual address setup command failed The programming of the Ethernet (MAC) address failed.
CAVEATS
The Racal Interlan NI5210 comes in variants with 8 and 16 kbytes of shared memory. It is strongly advisable to use the 16 kbyte variant.
You can upgrade your 8 kbyte card to 16 kbyte by adding an additional RAM chip.
SEE ALSO
arp(4), netintro(4), ng_ether(4), ifconfig(8)
AUTHORS
The ie device driver was written by Garrett A. Wollman, based on code by William F. Jolitz and Lawrence Berkeley Laboratories. 3C507 support
was written by Charles M. Hannum. This manual page was written by Wilko C. Bulte.
BSD
July 16, 2005 BSD