Sponsored Content
Full Discussion: Unable to connect ASMI
Operating Systems AIX Unable to connect ASMI Post 303023819 by bakunin on Sunday 23rd of September 2018 04:33:22 AM
Old 09-23-2018
Quote:
Originally Posted by filosophizer
but I am able to ping from my laptop/pc to the service IP address which is
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147
Yes, the IPs are active. Who tells you for sure that they are the service processors? They could be all sorts of systems, yes?

Quote:
Originally Posted by filosophizer
and also going to IVM, I can get the IP address for ASMI
Code:
$ lssysconn -r all
resource_type=0,type_model_serial_num=9113-550*107780E,sp=unavailable,side=unavailable,ipaddr=192.168.2.147,alt_ipaddr=192.168.3.147,state=No Connection,eth_loc_code=U787B.001.DNW3313-P1-T5,alt_eth_loc_code=U787B.001.DNW3313-P1-T6
$

OK, you have highlighted something, let me highlight something for you in return ;-)

Code:
$ lssysconn -r all
resource_type=0,type_model_serial_num=9113-550*107780E,sp=unavailable,side=unavailable,ipaddr=192.168.2.147,alt_ipaddr=192.168.3.14],state=No Connection,eth_loc_code=U787B.001.DNW3313-P1-T5,alt_eth_loc_code=U787B.001.DNW3313-P1-T6
$

I'd say the IVM awaits the interface to be where you are trying to find them. But it is not any more successful in that venture than you are. Therefore, eliminate all possible problems and connect directly to the system with a cross-over cable as suggested. That is a sure-fire method and if this fails the box is a case for the technician.

I hope this helps.

bakunin
This User Gave Thanks to bakunin For This Post:
 

10 More Discussions You Might Find Interesting

1. HP-UX

Unable to connect to HP-UX 11.11 via eXceed 7.1

Hello HP-UX Gurus, I am having issues trying to start an x-session via eXceed 7.1. When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up. I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Discussion started by: smokie
2 Replies

2. Solaris

Unable to connect to Internet

Hi friends recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Discussion started by: srinivas2828
6 Replies

3. Emergency UNIX and Linux Support

Unable to connect using SFTP

I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one. I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Discussion started by: ggayathri
7 Replies

4. AIX

Asmi errors

Hi friends How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me raj (0 Replies)
Discussion started by: senmak
0 Replies

5. AIX

Unable to connect VIO client

Hi I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct. i have rebooted and reconfigured the ip address, but issue is persists. Kindly suggest how to... (0 Replies)
Discussion started by: manoj.solaris
0 Replies

6. HP-UX

Unable to connect SSH from HP-UX

Hi, I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs: > /usr/local/bin/ssh2 -v -l testuser 10.10.10.10 debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Discussion started by: ysafi
4 Replies

7. Shell Programming and Scripting

Unable to connect to SQL through unix

I am trying to connect to SQL plus through unix but i am getting below error 'ksh: sqlplus: not found' note i am running this from /home/xxx do i need to set any environmental variable for this. below is my code echo " hello world" sqlplus -s apps/CAF78GEN<<EOF set heading... (4 Replies)
Discussion started by: karnatis
4 Replies

8. Red Hat

Unable to connect Wireless

I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at: wiki.centos.org/HowTos/Laptops/Wireless/Broadcom I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies

9. Red Hat

Unable to connect to internet

Hello, I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news ! Now bad news or not so great news. My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies

10. Solaris

Unable to connect using ftp

hi I am having issues when trying to connect using ftp, I am having the following error: User (10.100.48.73:(none)): moz 331 Password required for moza. Password: 530 Login incorrect. Login failed. ftp> by 221 Goodbye. I have created a user like this: useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
prtdscp(1M)						  System Administration Commands					       prtdscp(1M)

NAME
prtdscp - display DSCP IP addresses SYNOPSIS
prtdscp [-v ] prtdscp [-v ] -h prtdscp [-v ] -d prtdscp [-v ] -s DESCRIPTION
prtdscp displays the IP addresses associated with a Domain to Service Processor Communications Protocol (DSCP) link. If no arguments are specified, prtdscp displays the IP addresses on both ends of the DSCP link. The IP address of either the Service Processor or domain side can be displayed separately by the use of the -s or -d options, respectively. OPTIONS
The following options are supported: -v Verbose mode. Print additional details about the program's internal progress to stderr. -h Help. Print a brief synopsis of the program's usage and exit. All other command line arguments are ignored. -d Display only the local domain's IP address. -s Display only the remote Service Processor's IP address. EXAMPLES
Example 1 Displaying both addresses The following example displays both the local domain's IP address and the remote SP's IP address: # prtdscp Domain Address: 192.168.103.2 SP Address: 192.168.103.1 Example 2 Displaying the local IP address The following example displays the local domain's IP address: # prtdscp -d 192.168.103.2 Example 3 Displaying the remote IP address The following example display the remote SP's IP address: # prtdscp -s 192.168.103.1 ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWdscpr.u, SUNWdscpu.u | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
attributes(5) SunOS 5.11 25 Apr 2006 prtdscp(1M)
All times are GMT -4. The time now is 01:57 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy