but I am able to ping from my laptop/pc to the service IP address which is
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147
Yes, the IPs are active. Who tells you for sure that they are the service processors? They could be all sorts of systems, yes?
Quote:
Originally Posted by filosophizer
and also going to IVM, I can get the IP address for ASMI
OK, you have highlighted something, let me highlight something for you in return ;-)
I'd say the IVM awaits the interface to be where you are trying to find them. But it is not any more successful in that venture than you are. Therefore, eliminate all possible problems and connect directly to the system with a cross-over cable as suggested. That is a sure-fire method and if this fails the box is a case for the technician.
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Hi friends
How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me
raj (0 Replies)
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
LEARN ABOUT DEBIAN
arpsend
arpsend(8) Containers arpsend(8)NAME
arpsend - send ARP requests
SYNOPSIS
arpsend -D -e target_ip [ -e target_ip ...] [-c count] [-w timeout] interface
arpsend -U -i source_ip [-c count] [-w timeout] interface
DESCRIPTION
Utility arpsend sends ARP packets on device interface to detect or update neighbours' ARP caches with a given IP.
COMMANDS
Run utility with one of the following commands:
-D Send broadcast ARP request to detect neighbours with target_ip. You have to specify target_ip (-e option).
-U Send broadcast ARP request to update neighbours' ARP caches with source_ip. You have to specify source_ip (-i option).
OPTIONS -c count
Number of packets to send. Default is infinity.
-w interval
Interval between packets, in seconds. Default is 1 second.
-i source_ip_address
Set source IP address field in ARP packet.
-e target_ip_address
Set target IP address field in ARP packet. Note that you can specify -e option multiple times to detect many IP addresses in one
utility call.
EXIT STATUS
arpsend returns 0 upon successful execution. If something goes wrong, it returns an appropriate error code.
1 EXC_USAGE
Usage error
2 EXC_SYSTEM
System error
3 EXC_RECV
ARP reply was received
EXAMPLES
To send request on interface eth0 to detect any neighbour computers with IP 192.168.10.200:
arpsend -D -e 192.168.10.200 eth0
To send request on interface eth0 to update neighbours' ARP caches with IP 192.168.10.200:
arpsend -U -i 192.168.10.200 eth0
NOTES
Interface you use have to be arpable and not be loopback (i.e. /sbin/ip link show interface should show neither NOARP nor LOOPBACK flags
in interface parameters).
SEE ALSO vzctl(8).
LICENSE
Copyright (C) 2000-2011, Parallels, Inc. Licensed under GNU GPL.
OpenVZ 28 Jun 2011 arpsend(8)