Unable to connect ASMI Post: 303023819

Sponsored Content

Operating Systems AIX Unable to connect ASMI Post 303023819 by bakunin on Sunday 23rd of September 2018 04:33:22 AM

09-23-2018

Registered User

Quote:

Originally Posted by filosophizer

but I am able to ping from my laptop/pc to the service IP address which is
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147

Yes, the IPs are active. Who tells you for sure that they are the service processors? They could be all sorts of systems, yes?

Quote:

Originally Posted by filosophizer

and also going to IVM, I can get the IP address for ASMI

Code:

$ lssysconn -r all
resource_type=0,type_model_serial_num=9113-550*107780E,sp=unavailable,side=unavailable,ipaddr=192.168.2.147,alt_ipaddr=192.168.3.147,state=No Connection,eth_loc_code=U787B.001.DNW3313-P1-T5,alt_eth_loc_code=U787B.001.DNW3313-P1-T6
$

OK, you have highlighted something, let me highlight something for you in return ;-)

Code:

$ lssysconn -r all
resource_type=0,type_model_serial_num=9113-550*107780E,sp=unavailable,side=unavailable,ipaddr=192.168.2.147,alt_ipaddr=192.168.3.14],state=No Connection,eth_loc_code=U787B.001.DNW3313-P1-T5,alt_eth_loc_code=U787B.001.DNW3313-P1-T6
$

I'd say the IVM awaits the interface to be where you are trying to find them. But it is not any more successful in that venture than you are. Therefore, eliminate all possible problems and connect directly to the system with a cross-over cable as suggested. That is a sure-fire method and if this fails the box is a case for the technician.

I hope this helps.

bakunin

This User Gave Thanks to bakunin For This Post:

bakunin

View Public Profile for bakunin

Find all posts by bakunin

10 More Discussions You Might Find Interesting

1. HP-UX

Unable to connect to HP-UX 11.11 via eXceed 7.1

Hello HP-UX Gurus, I am having issues trying to start an x-session via eXceed 7.1. When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up. I made the modification to the following file �/etc/dt/config/Xaccess�...

2. Solaris

Unable to connect to Internet

Hi friends recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can...

3. Emergency UNIX and Linux Support

Unable to connect using SFTP

I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one. I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX...

4. AIX

Asmi errors

Hi friends How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me raj

5. AIX

Unable to connect VIO client

Hi I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct. i have rebooted and reconfigured the ip address, but issue is persists. Kindly suggest how to...

6. HP-UX

Unable to connect SSH from HP-UX

Hi, I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs: > /usr/local/bin/ssh2 -v -l testuser 10.10.10.10 debug: Ssh2/ssh2.c:1391: Using file...

7. Shell Programming and Scripting

Unable to connect to SQL through unix

I am trying to connect to SQL plus through unix but i am getting below error 'ksh: sqlplus: not found' note i am running this from /home/xxx do i need to set any environmental variable for this. below is my code echo " hello world" sqlplus -s apps/CAF78GEN<<EOF set heading...

8. Red Hat

Unable to connect Wireless

I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at: wiki.centos.org/HowTos/Laptops/Wireless/Broadcom I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved...

9. Red Hat

Unable to connect to internet

Hello, I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news ! Now bad news or not so great news. My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1...

10. Solaris

Unable to connect using ftp

hi I am having issues when trying to connect using ftp, I am having the following error: User (10.100.48.73:(none)): moz 331 Password required for moza. Password: 530 Login incorrect. Login failed. ftp> by 221 Goodbye. I have created a user like this: useradd -g 10 -d /lam/moza -m -s...

LEARN ABOUT DEBIAN

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <stgt@vger.kernel.org>

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)

10 More Discussions You Might Find Interesting

1. HP-UX

Unable to connect to HP-UX 11.11 via eXceed 7.1

Discussion started by: smokie

2. Solaris

Unable to connect to Internet

Discussion started by: srinivas2828

3. Emergency UNIX and Linux Support

Unable to connect using SFTP

Discussion started by: ggayathri

4. AIX

Asmi errors

Discussion started by: senmak