09-22-2018
Quote:
Originally Posted by
filosophizer
OK, everything is fine, however now cannot connect to ASMI through browser,
using both HMC Ports
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147
I haven't used an IBM p-Series without a HMC for such a long time that i am not sure i can help you off the top of my head here. However, there might be all sorts of problems putting obstacles into the IP-communication between your browser and the Serviceprocessor.
First off, it might be that the IP addresses have once been changed and i am not sure if a simple SP-reset really changes that back to the defaults. (That i am not sure means just that: i don't know. If you have information in the affirmative, then perhaps it is so.)
Second, there is a sure-fire way to connect to the SP, whatever its IP might be: go to the data centre, connect a crossed-out cable to the SP connector 1 or 2 and connect your system directly to it. I have a small netbook for these purposes with a Wireshark/Ethereal software installed, so i can identify even unknown or fogotten IP-adresses. Once you identified the IP-address you still need the ASMI password, which is, btw., completely separate!
I hope this helps.
bakunin
10 More Discussions You Might Find Interesting
1. HP-UX
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Discussion started by: smokie
2 Replies
2. Solaris
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Discussion started by: srinivas2828
6 Replies
3. Emergency UNIX and Linux Support
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Discussion started by: ggayathri
7 Replies
4. AIX
Hi friends
How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me
raj (0 Replies)
Discussion started by: senmak
0 Replies
5. AIX
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Discussion started by: manoj.solaris
0 Replies
6. HP-UX
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Discussion started by: ysafi
4 Replies
7. Shell Programming and Scripting
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
Discussion started by: karnatis
4 Replies
8. Red Hat
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies
9. Red Hat
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies
10. Solaris
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
LEARN ABOUT DEBIAN
net::socks
Net::SOCKS(3pm) User Contributed Perl Documentation Net::SOCKS(3pm)
NAME
Net::SOCKS - a SOCKS client class
SYNOPSIS
Establishing a connection:
my $sock = new Net::SOCKS(socks_addr => '192.168.1.3',
socks_port => 1080,
user_id => 'the_user',
user_password => 'the_password',
force_nonanonymous => 1,
protocol_version => 5);
# connect to finger port and request finger information for some_user
my $f= $sock->connect(peer_addr => '192.168.1.3', peer_port => 79);
print $f "some_user
"; # example writing to socket
while (<$f>) { print } # example reading from socket
$sock->close();
Accepting an incoming connection:
my $sock = new Net::SOCKS(socks_addr => '192.168.1.3',
socks_port => 1080,
user_id => 'the_user',
user_password => 'the_password',
force_nonanonymous => 1,
protocol_version => 5);
my ($ip, $ip_dot_dec, $port) = $sock->bind(peer_addr => "128.10.10.11",
peer_port => 9999);
$f= $sock->accept();
print $f "Hi! Type something.
"; # example writing to socket
while (<$f>) { print } # example reading from socket
$sock->close();
DESCRIPTION
my $sock = new Net::SOCKS(socks_addr => '192.168.1.3',
socks_port => 1080,
user_id => 'the_user',
user_password => 'the_password',
force_nonanonymous => 1,
protocol_version => 5);
To connect to a SOCKS server, specify the SOCKS server's
hostname, port number, SOCKS protocol version, username, and
password. Username and password are optional if you plan
to use a SOCKS server that doesn't require any authentication.
If you would like to force the connection to be
nonanoymous, set the force_nonanonymous parameter.
my $f= $sock->connect(peer_addr => '192.168.1.3', peer_port => 79);
To connect to another machine using SOCKS, use the connect method.
Specify the host and port number as parameters.
my ($ip, $ip_dot_dec, $port) = $sock->bind(peer_addr => "192.168.1.3",
peer_port => 9999);
If you wanted to accept a connection with SOCKS, specify the host
and port of the machine you expect a connection from. Upon
success, bind() returns the ip address and port number that
the SOCKS server is listening at on your behalf.
$f= $sock->accept();
If a call to bind() returns a success status code SOCKS_OKAY,
a call to the accept() method will return when the peer host
connects to the host/port that was returned by the bind() method.
Upon success, accept() returns SOCKS_OKAY.
$sock->close();
Closes the connection.
SEE ALSO
RFC 1928, RFC 1929.
AUTHOR
Clinton Wong, clintdw@netcom.com
COPYRIGHT
Copyright (c) 1997-1998 Clinton Wong. All rights reserved.
This program is free software; you can redistribute it
and/or modify it under the same terms as Perl itself.
perl v5.14.2 2012-04-18 Net::SOCKS(3pm)