09-22-2018
Quote:
Originally Posted by
filosophizer
OK, everything is fine, however now cannot connect to ASMI through browser,
using both HMC Ports
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147
I haven't used an IBM p-Series without a HMC for such a long time that i am not sure i can help you off the top of my head here. However, there might be all sorts of problems putting obstacles into the IP-communication between your browser and the Serviceprocessor.
First off, it might be that the IP addresses have once been changed and i am not sure if a simple SP-reset really changes that back to the defaults. (That i am not sure means just that: i don't know. If you have information in the affirmative, then perhaps it is so.)
Second, there is a sure-fire way to connect to the SP, whatever its IP might be: go to the data centre, connect a crossed-out cable to the SP connector 1 or 2 and connect your system directly to it. I have a small netbook for these purposes with a Wireshark/Ethereal software installed, so i can identify even unknown or fogotten IP-adresses. Once you identified the IP-address you still need the ASMI password, which is, btw., completely separate!
I hope this helps.
bakunin
10 More Discussions You Might Find Interesting
1. HP-UX
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Discussion started by: smokie
2 Replies
2. Solaris
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Discussion started by: srinivas2828
6 Replies
3. Emergency UNIX and Linux Support
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Discussion started by: ggayathri
7 Replies
4. AIX
Hi friends
How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me
raj (0 Replies)
Discussion started by: senmak
0 Replies
5. AIX
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Discussion started by: manoj.solaris
0 Replies
6. HP-UX
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Discussion started by: ysafi
4 Replies
7. Shell Programming and Scripting
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
Discussion started by: karnatis
4 Replies
8. Red Hat
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies
9. Red Hat
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies
10. Solaris
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
LEARN ABOUT DEBIAN
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)
NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS
-a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.168.1.0
range-stop = 192.168.1.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.168.1.5
192.168.1.82
192.168.1.244
192.168.1.57
192.168.1.120
192.168.1.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144
SEE ALSO
radiusd(8)
AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)