installed fedora core 5 on a pc with USB and some usual things. in boot up it is stopped at "Starting udev:". Its harddisk light is busy. is it reconfiguring the kernel?. what do to solve this problem?. (0 Replies)
Hello all
I have to run manually make commands in our system the make compilations task's takes very long
And I like to be able to run another make task right after one is finished.
What is the best way to automate it ? (2 Replies)
Hi,
I worte a script which runs perfect when i execute it manually. But when i scheduled into cron the grep command alone is not working.
the sample script,
/usr/bin/grep FTP $subfile > /tmp/tfsrec.dat
tfs=`echo $?`
if
then
echo "FTP FOUND"
else
echo "FTP NOT FOUND"
Where... (5 Replies)
I'm curious about the behavior where any udev labeled device causes that corresponding listing to disappear from fdisk, sfdisk, or in the case of RDAC, lsvdev.
I have seen this on both EMC clariion and Sun Storagetek/Engenio 6540 arrays.
We use RHEL5.1 and udev to create persistent labels for... (2 Replies)
Hello!
I'm sorry if this is the false Forum, didn't really knew where to put it...
My question:
I have serveral USB-Sticks and wrote several Udev-Rules for theme, each Sticks needs to do something else, but all are using the same script (they have common tasks to do) and only some parts are... (2 Replies)
hi
i want to automate fdisk command .
i spawned a process containing fdisk command from a process
and tried to send the options to fdisk promt from that process.
but that spawed process is notstarting itself
help me out
trying for two days
:wall:
my code:
#!/bin/bash
echo... (5 Replies)
Hello,
MBR partition table made by linux fdisk looks certainly not correct when printed by openbsd fdisk:
Partition table created on linux (centos 6.3):
# fdisk -l /dev/sdc
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 *... (2 Replies)
I have made a program that reads a text file and checks for palindromic words and then outputs them. They each appear on a new line with a count of the number of occurences beside each of the words.
Requirements for being classed as palindrome are that the word must have at least 3 letters and... (7 Replies)
Discussion started by: greenhouse91
7 Replies
LEARN ABOUT SUSE
sane-find-scanner
sane-find-scanner(1) SANE Scanner Access Now Easy sane-find-scanner(1)NAME
sane-find-scanner - find SCSI and USB scanners and their device files
SYNOPSIS
sane-find-scanner [-h|-?] [-v] [-q] [-p] [-f] [-F filename] [devname]
DESCRIPTION
sane-find-scanner is a command-line tool to find SCSI and USB scanners and determine their Unix device files. Its primary aim is to make
sure that scanners can be detected by SANE backends.
For SCSI scanners, it checks the default generic SCSI device files (e.g., /dev/sg0) and /dev/scanner. The test is done by sending a SCSI
inquiry command and looking for a device type of "scanner" or "processor" (some old HP scanners seem to send "processor"). So
sane-find-scanner will find any SCSI scanner connected to those default device files even if it isn't supported by any SANE backend.
For USB scanners, first the USB kernel scanner device files (e.g. /dev/usb/scanner0), /dev/usb/scanner, and /dev/usbscanner) are tested.
The files are opened and the vendor and device ids are determined, if the operating system supports this feature. Currently USB scanners
are only found this way if they are supported by the Linux scanner module or the FreeBSD or OpenBSD uscanner driver. After that test,
sane-find-scanner tries to scan for USB devices found by the USB library libusb (if available). There is no special USB class for scanners,
so the heuristics used to distinguish scanners from other USB devices is not perfect. sane-find-scanner also tries to find out the type of
USB chip used in the scanner. If detected, it will be printed after the vendor and product ids. sane-find-scanner will even find USB scan-
ners, that are not supported by any SANE backend.
sane-find-scanner won't find most parallel port scanners, or scanners connected to proprietary ports. Some parallel port scanners may be
detected by sane-find-scanner -p. At the time of writing this will only detect Mustek parallel port scanners.
OPTIONS -h, -? Prints a short usage message.
-v Verbose output. If used once, sane-find-scanner shows every device name and the test result. If used twice, SCSI inquiry informa-
tion and the USB device descriptors are also printed.
-q Be quiet. Print only the devices, no comments.
-p Probe parallel port scanners.
-f Force opening all explicitly given devices as SCSI and USB devices. That's useful if sane-find-scanner is wrong in determining the
device type.
-F filename
filename is a file that contains USB descriptors in the format of /proc/bus/usb/devices as used by Linux. sane-find-scanner tries
to identify the chipset(s) of all USB scanners found in such a file. This option is useful for developers when the output of "cat
/proc/bus/usb/devices" is available but the scanner itself isn't.
devname Test device file "devname". No other devices are checked if devname is given.
EXAMPLE
sane-find-scanner -v
Check all SCSI and USB devices for available scanners and print a line for every device file.
sane-find-scanner /dev/scanner
Look for a (SCSI) scanner only at /dev/scanner and print the result.
sane-find-scanner -p
Probe for parallel port scanners.
SEE ALSO sane(7), sane-scsi(5), sane-usb(5), scanimage(1), xscanimage(1), xsane(1), sane-"backendname"(5)
AUTHOR
Oliver Rauch, Henning Meier-Geinitz and others
SUPPORTED PLATFORMS
USB support is limited to Linux (kernel, libusb), FreeBSD (kernel, libusb), NetBSD (libusb), OpenBSD (kernel, libusb). Detecting the vendor
and device ids only works with Linux or libusb.
SCSI support is available on Irix, EMX, Linux, Next, AIX, Solaris, FreeBSD, NetBSD, OpenBSD, and HP-UX.
BUGS
No support for most parallel port scanners yet.
Detection of USB chipsets is limited to a few chipsets.
13 Jul 2008 sane-find-scanner(1)