My system suddenly crash and when it rebooted there was an error:
Code:
/dev/rdsk/c1t0d0s3 is logging
svc.startd[[7]: svc:/network/nis/client:default: Method "/method/yp" failed with status 96.
[ network/nis/client:default misconfigured (see 'svcs -x' for details ]
The system completes booting however when I log in a user account / directory is not longer available.
When I run svcs -xv command is states:
Code:
network/nis/client:default State is Maintenance
Started method exitedwith $SMF_EXIT_ERR_CONFIG
Impact This service is not running
Any idea on how to restore user account and files.
Thanks for you help
Moderator's Comments:
Please use CODE tags (for data as well) as required by forum rules!
Please post in an adequate forum.
Last edited by RudiC; 09-06-2018 at 02:34 AM..
Reason: Moved thread from "How to post ..." / Added CODE tags.
I have a 44P-170 (7044-170) machine that has 4.3 ML11 installed on it and I am having a problem with NFS/NIS at boot. The machine will boot all the way up to the CDE login screen but when I log in as root, the screen goes black and will stay that way overnight. I have tried a console login as... (24 Replies)
hello,
I am using "microsoft services for UNIX adminstration" as an nfs/nis client in order to connect to a remote NFS folder with NIS authentication
nfs mount seems to fail on the authentication stage. I get the login box from the client, but any (NIS mapped) loging seems to reject me.... (2 Replies)
How can i check which service is activated on my AIX Box?
how one can check particular port is open or not (like ftp/telnet port)?
I dont have admin rights (1 Reply)
I'm creating a scrip for auditing our AIX box's to ensure that they are built according to our system standards. I'm not sure on the logic for checking to see if the NIS and NIS+ services are disabled. any idea's? (2 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
Hi,
How can I list running services, corresponding package name and status on the AIX host?
On Linux (Centos), I use the below code snippet:-
for i in `chkconfig --list | awk '{ print $1}'`; do
status=`/sbin/service $i status`
packagename=`rpm -qf /etc/init.d/$i`
done
Is there... (2 Replies)
Hi,
I am trying to list down list of running services, corresponding package name and status on HP-UX box. The output will be a CSV in a fashion:- Service Name, Package Name, Status.
While working on Linux centos, I used chkconfig to do the same. Below was the snippet:-
for i in `chkconfig... (3 Replies)
I have an m5000 that Is down.
I have access to XSCF>
and was able to get to the ok prompt.
However, on
>ok boot
it failed to boot.
erred with :
svc.startd: svc:/system/device/fc-fabric:default: Method "/lib/svc/method/fc-fabric" failed due to signal KILL.
Nov 29... (3 Replies)
Hi,
Few services not starting on new build Solaris 11 non-global zone. I uninstalled zone and reinstalled and still same issue, while global zone is working fine.
smpt service is going into maintenance mode and /var/svc/log/network-smtp:sendmail.log shows that it tries and then dead
... (0 Replies)
Discussion started by: solaris_1977
0 Replies
LEARN ABOUT BSD
statd
statd(1M) System Administration Commands statd(1M)NAME
statd - network status monitor
SYNOPSIS
/usr/lib/nfs/statd
DESCRIPTION
statd is an intermediate version of the status monitor. It interacts with lockd(1M) to provide the crash and recovery functions for the
locking services on NFS. statd keeps track of the clients with processes which hold locks on a server. When the server reboots after a
crash, statd sends a message to the statd on each client indicating that the server has rebooted. The client statd processes then inform
the lockd on the client that the server has rebooted. The client lockd then attempts to reclaim the lock(s) from the server.
statd on the client host also informs the statd on the server(s) holding locks for the client when the client has rebooted. In this case,
the statd on the server informs its lockd that all locks held by the rebooting client should be released, allowing other processes to lock
those files.
lockd is started by automountd(1M), mount_nfs(1M), and share(1M) if NFS automounts are needed.
FILES
/var/statmon/sm lists hosts and network addresses to be contacted after a reboot
/var/statmon/sm.bak lists hosts and network addresses that could not be contacted after last reboot
/var/statmon/state includes a number which changes during a reboot
/usr/include/rpcsvc/sm_inter.x contains the rpcgen source code for the interface services provided by the statd daemon.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWnfscu |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), automountd(1M), lockd(1M), mount_nfs(1M), share(1M), svcadm(1M), attributes(5), smf(5)
System Administration Guide: IP Services
NOTES
The crash of a server is only detected upon its recovery.
The statd service is managed by the service management facility, smf(5), under the service identifier:
svc:/network/nfs/status
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
If it is disabled, it will be enabled by mount_nfs(1M), share_nfs(1M), and automountd(1M) unless its application/auto_enable prop-
erty is set to false.
SunOS 5.10 18 Nov 2004 statd(1M)
09-06-2018
