So, as far as i understood - one disk removed array works, other disk array does not work ?
Did you use fdisk or (g)parted on those disks at all to put raid type ?
As for samba and your actual requirement, that is layers above. One at the time
First you need your md device to be redundant and working after reboot.
What is the HW on that server, since you can unplug disks live ?
I would advise against that practice to test redundancy, if not specifically supported.
You see disk fail in various ways, but rarely unplugging the cable or hitting it with an axe.
Testing will prove difficult
But from my experience @ home, i had an RAID1 array, one disk died of natural causes (old age) and the mdadm system did the job.
This was some time ago tho..
Can you show output of :
Code:
fdisk -l /dev/sdb
fdisk -l /dev/sdc
Have you considered using ZFS on ubuntu ?
It should really ease up the process of creating a mirror and managing it in a long run.
Yeah,u arr right. When i pull out on of the disks i cant access folder test where i mounted md0.
My only concerne is to secure those data. Ok samba is on the layers above and its not very important to users to access it,but files must be replicated each other when i put some unix based live system to backup or save files if one disk fail.
I didnt try anything,only madm
------ Post updated 09-01-18 at 04:26 AM ------
My only concern if i left it like this, does the data be readble from a some linux usb live system or not. Nothing else
Hi,
I am facing problem while accessing samba share on Linux 5.1 from windows, though I have done the same configuration on Linux 4 (Update 2), on Red Hat 4.0 it is working but while on Linux 5.1 these configuration are not working, I have disabled the firewall also.
Kindly suggest me... (1 Reply)
Hi everyone! I'm trying to run a script when a folder is shared and when it stop being shared.
Is there something like .start_share or .stop_share scripts in Samba where I could run some commands?:confused:
edit: maybe with a wrapper in smbmount but I share folders via nautilus. Any ideas? (0 Replies)
Hi I have an issue with a client. He was able to use his mounted Samba share for a long time. However, a couple of days ago, he wasn't able to access all of his files all of a sudden. He still see's the share and majority of the files, but not some that he needs.
I checked with Secure CRT on... (1 Reply)
Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account.
If I set my security to user, my secured shares work just fine and prompt accordingly, but when... (0 Replies)
I am setup a samba share server which is authenticating from Active Directory.
I am able to access the share with AD user but not able to access when group defined in "valid users" parameters.
below are the steps i performed.
In smb.conf
workgroup = QASLABS
password server =... (3 Replies)
Hi ,
In samba i have shared my home directory,
but its showing as a printer.
Not able to share data.
$ smbclient -L 192.168.122.1
Enter priyank's password:
Domain= OS= Server=
Sharename Type Comment
--------- ---- -------
shared_priyank Printer ... (3 Replies)
Hello,
I want to connect to two samba shares both on the same Linux box but each with a different username from a windows server 2008. I created 2 gpos to connect and I can connect to the shares individually via net use command, but once I entered credentials for one of the shares, it seems I... (1 Reply)
Long running samba share. Never have any problems,
Suddenly started asking windows users for password - which doesnt work. Tried to manually reset smb password and manually map - still wrong password.
Restart samba? (2 Replies)
Hi,
I need to mount a directory from a Windows server to a CentOS box.
The Windows server used is Windows Server 2003, and the path to the directory that I want to mount on CentOS is C:\Tomcat6\webapps\NASApp\logs.
I am not sure of the correct way to mount this on CentOS, as most of the... (2 Replies)
Discussion started by: anaigini45
2 Replies
LEARN ABOUT OSF1
rmf
rmf(1) General Commands Manual rmf(1)NAME
rmf - remove folder (only available within the message handling system, mh)
SYNOPSIS
rmf [+folder] [-help] [-[no]interactive]
OPTIONS
Prints a list of the valid options to this command. Asks for confirmation before deleting a folder. By default, rmf deletes a folder and
its messages without asking for confirmation. If you specify the -interactive option, rmf asks if you are sure before deleting the folder.
You are advised to use this option, since when rmf deletes a folder its contents are lost irretrievably.
DESCRIPTION
The rmf command removes all of the messages within the current folder, and then removes the folder itself. If there are any files within
the folder which are not part of MH, they are not removed, and an error message is displayed.
You can specify a folder other than the current folder by using the +folder argument. If you do not specify a folder, and rmf cannot find
the current folder,rmf asks you whether you want to delete +inbox instead.
If the current folder is removed, it makes +inbox current.
Note that the rmf command irreversibly deletes messages that do not have other links, so use it with caution.
If the folder being removed is a sub-folder, the parent folder becomes the new current folder, and rmf tells you that this has happened.
This provides an easy mechanism for selecting a set of messages, operating on the list, then removing the list and returning to the current
folder from which the list was extracted.
Using rmf to delete a read-only folder deletes the private sequence and current message information from the file, without affecting the
folder itself. If you have sub-folders within a folder, you must delete all the sub-folders before you can delete the folder itself.
PROFILE COMPONENTS
Path: To determine the user's Mail directory
EXAMPLES
This example shows how rmf asks for confirmation when the -interactive option is used: % rmf -interactive +test Remove folder "test"? y
FILES
The user profile.
SEE ALSO rmm(1)rmf(1)
09-01-2018
