Please answer the question asked by Peasant about did you run:
Quote:
Originally Posted by Peasant
Lets just make this clear for the sake of argument.
So, you create a /dev/md0 from /dev/sdc /dev/sdb disks.
You mount it via mount command and add into /etc/fstab.
After reboot (all disks are inside), everything works as expected (mounted and healty).
You poweroff the box, and remove one of the disks from array.
Booting up everything is fine, except lacking one disk you removed.
After you poweroff and replug the drive, power on, there should be still one disk in the md setup. The one you didn't touch should still be part of md device.
Is this correct ?
Point being, if you unplug the drive, that drive is not considired part of array anymore.
When you plug it back, it will not magically rebuild, this has to be done by hand.
And of course, if you plug the other one out, and leave the first one in, you will not have a working md array.
Regards
Peasant.
You are right.
I added it to md0 manually, thats not a problem. Problem is why my data from /mnt/raid is not accessible and i cant read it when i unplug one of the 2 devices?
Thats strange from me, i cant figure out.
I added a folder in array in which i have mounted /dev/md0.
so i have a folder
/mnt/raid/test
and inside test some files.
I cant access it and all is fine. When I unplug disk when machine is running(or not, its the same result), i cant read from that test folder.
Input output error gives me.
But when I unplug another disk, it is working just fine.
Thats what bothers me.
Idea behind all this is to have a shared folder and prevention of data loss. If that disk fails i cannot access to that files. Thats the problem
Last edited by tomislav91; 08-31-2018 at 10:12 AM..
Hi,
I am facing problem while accessing samba share on Linux 5.1 from windows, though I have done the same configuration on Linux 4 (Update 2), on Red Hat 4.0 it is working but while on Linux 5.1 these configuration are not working, I have disabled the firewall also.
Kindly suggest me... (1 Reply)
Hi everyone! I'm trying to run a script when a folder is shared and when it stop being shared.
Is there something like .start_share or .stop_share scripts in Samba where I could run some commands?:confused:
edit: maybe with a wrapper in smbmount but I share folders via nautilus. Any ideas? (0 Replies)
Hi I have an issue with a client. He was able to use his mounted Samba share for a long time. However, a couple of days ago, he wasn't able to access all of his files all of a sudden. He still see's the share and majority of the files, but not some that he needs.
I checked with Secure CRT on... (1 Reply)
Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account.
If I set my security to user, my secured shares work just fine and prompt accordingly, but when... (0 Replies)
I am setup a samba share server which is authenticating from Active Directory.
I am able to access the share with AD user but not able to access when group defined in "valid users" parameters.
below are the steps i performed.
In smb.conf
workgroup = QASLABS
password server =... (3 Replies)
Hi ,
In samba i have shared my home directory,
but its showing as a printer.
Not able to share data.
$ smbclient -L 192.168.122.1
Enter priyank's password:
Domain= OS= Server=
Sharename Type Comment
--------- ---- -------
shared_priyank Printer ... (3 Replies)
Hello,
I want to connect to two samba shares both on the same Linux box but each with a different username from a windows server 2008. I created 2 gpos to connect and I can connect to the shares individually via net use command, but once I entered credentials for one of the shares, it seems I... (1 Reply)
Long running samba share. Never have any problems,
Suddenly started asking windows users for password - which doesnt work. Tried to manually reset smb password and manually map - still wrong password.
Restart samba? (2 Replies)
Hi,
I need to mount a directory from a Windows server to a CentOS box.
The Windows server used is Windows Server 2003, and the path to the directory that I want to mount on CentOS is C:\Tomcat6\webapps\NASApp\logs.
I am not sure of the correct way to mount this on CentOS, as most of the... (2 Replies)
Discussion started by: anaigini45
2 Replies
LEARN ABOUT SUNOS
pcata
pcata(7D)pcata(7D)NAME
pcata - PCMCIA ATA card device driver
SYNOPSIS
pcata@socket#:a -u
pcata@socket#:a -u,raw
The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:
o PC card 2.01 compliance (MBR+fdisk table required for all platforms).
o PC card ATA 2.01 compliance.
o PC card services 2.1 compliance.
The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and
/dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
may have the following:
+------------------------+---------------------------+---------------------+
| Platform | | |
+------------------------+---------------------------+---------------------+
|/devices name | | |
+------------------------+---------------------------+---------------------+
+------------------------+-/dev/dsk-name-------------+---------------------+
|/devices/isa/pcic@1,3e0 | | |
+------------------------+---------------------------+---------------------+
|/disk@0:a | | |
+------------------------+---------------------------+---------------------+
+------------------------+-/devices/iommu@f,e0000000-/sbus@f,e0001000-/SUNW, pcmcia@3,0 /disk@0:a
|SPARC | | /dev/dsk/c1d0s0 |
| | | |
| | | |
+------------------------+---------------------------+---------------------+
PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files
created (if they do not already exist).
Known Problems and Limitations
o vold does not support pcata. File systems must be mounted manually.
o You need to umount the file system before removing the disk.
o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.
CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.
Initial Installation and Configuration
1. Install the Solaris software.
2. Boot the system.
3. Insert the PC card ATA device.
Identifying an Unrecognized Device
If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.
1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf output.
For example:
# prtconf -D
. . .
pcic, instance #0 (driver name: pcic)
. . .
disk, instance #0
2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware. Check
to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if it works on
the same machine using DOS.
Special Files
For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers
to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
encode the socket number in any part of the name.
Hot-Plugging
o If you want to remove the disk, you must unmount the file system.
o Use the mkfs_pcfs(1M) command to create a pcfs file system:
# mkfs -F pcfs /dev/rdsk/c#d#p0:d
o To mount a pcfs file system, type:
# mount -F pcfs /dev/dsk/c#d#p0:c /mnt
o If you want to create a ufs file system, use the newfs command and type:
# newfs /dev/rdsk/c#d#s#
o To mount a ufs file system, type:
# mount -F ufs /dev/dsk/c#d#s# /mnt
o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man page.
/kernel/drv/pcata pcata driver
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE |
+-----------------------------+-----------------------------+
|VALUE | |
+-----------------------------+-----------------------------+
|Availability |SUNWpsdpr |
+-----------------------------+-----------------------------+
format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)
20 Oct 2000 pcata(7D)