Sponsored Content
Operating Systems Linux Ubuntu Samba share on software raid1 Post 303022417 by Peasant on Friday 31st of August 2018 08:26:45 AM
Old 08-31-2018
Lets just make this clear for the sake of argument.

So, you create a /dev/md0 from /dev/sdc /dev/sdb disks.
You mount it via mount command and add into /etc/fstab.

After reboot (all disks are inside), everything works as expected (mounted and healty).
You poweroff the box, and remove one of the disks from array.
Booting up everything is fine, except lacking one disk you removed.

After you poweroff and replug the drive, power on, there should be still one disk in the md setup. The one you didn't touch should still be part of md device.
Is this correct ?

Point being, if you unplug the drive, that drive is not considired part of array anymore.
When you plug it back, it will not magically rebuild, this has to be done by hand.
And of course, if you plug the other one out, and leave the first one in, you will not have a working md array.

Regards
Peasant.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How can i set up Software disk mirroring(Raid1) in SCO 5.0.5 with two SCSI harddisk ?

thank u very much, (1 Reply)
Discussion started by: coralsea
1 Replies

2. Linux

Facing problem in Samba share

Hi, I am facing problem while accessing samba share on Linux 5.1 from windows, though I have done the same configuration on Linux 4 (Update 2), on Red Hat 4.0 it is working but while on Linux 5.1 these configuration are not working, I have disabled the firewall also. Kindly suggest me... (1 Reply)
Discussion started by: manoj.solaris
1 Replies

3. Linux

Samba share script

Hi everyone! I'm trying to run a script when a folder is shared and when it stop being shared. Is there something like .start_share or .stop_share scripts in Samba where I could run some commands?:confused: edit: maybe with a wrapper in smbmount but I share folders via nautilus. Any ideas? (0 Replies)
Discussion started by: funyotros
0 Replies

4. UNIX for Advanced & Expert Users

Problems between a HP UX 11.31 Samba share and Windows 7...

Hi I have an issue with a client. He was able to use his mounted Samba share for a long time. However, a couple of days ago, he wasn't able to access all of his files all of a sudden. He still see's the share and majority of the files, but not some that he needs. I checked with Secure CRT on... (1 Reply)
Discussion started by: zixzix01
1 Replies

5. Solaris

samba issue: one samba share without password prompting and the others with.

Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account. If I set my security to user, my secured shares work just fine and prompt accordingly, but when... (0 Replies)
Discussion started by: ideal2545
0 Replies

6. Red Hat

How to Map AD groups to Samba share?

I am setup a samba share server which is authenticating from Active Directory. I am able to access the share with AD user but not able to access when group defined in "valid users" parameters. below are the steps i performed. In smb.conf workgroup = QASLABS password server =... (3 Replies)
Discussion started by: sunnysthakur
3 Replies

7. Red Hat

Samba share problem in Linux 6.4

Hi , In samba i have shared my home directory, but its showing as a printer. Not able to share data. $ smbclient -L 192.168.122.1 Enter priyank's password: Domain= OS= Server= Sharename Type Comment --------- ---- ------- shared_priyank Printer ... (3 Replies)
Discussion started by: Priy
3 Replies

8. UNIX for Beginners Questions & Answers

Samba Share access from windows

Hello, I want to connect to two samba shares both on the same Linux box but each with a different username from a windows server 2008. I created 2 gpos to connect and I can connect to the shares individually via net use command, but once I entered credentials for one of the shares, it seems I... (1 Reply)
Discussion started by: zaineyma
1 Replies

9. Red Hat

Samba share - currently not working

Long running samba share. Never have any problems, Suddenly started asking windows users for password - which doesnt work. Tried to manually reset smb password and manually map - still wrong password. Restart samba? (2 Replies)
Discussion started by: psychocandy
2 Replies

10. UNIX for Advanced & Expert Users

Mounting a samba share

Hi, I need to mount a directory from a Windows server to a CentOS box. The Windows server used is Windows Server 2003, and the path to the directory that I want to mount on CentOS is C:\Tomcat6\webapps\NASApp\logs. I am not sure of the correct way to mount this on CentOS, as most of the... (2 Replies)
Discussion started by: anaigini45
2 Replies
mount_pcfs(1M)						  System Administration Commands					    mount_pcfs(1M)

NAME
mount_pcfs - mount pcfs file systems SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted. If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments, including the FSType-specific_options; see mount(1M) for more details. The special argument can be one of two special device file types: o A floppy disk, such as /dev/diskette0 or /dev/diskette1. o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are /dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1. The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table. OPTIONS
generic_options See mount(1M) for the list of supported options. -o Specify pcfs file system specific options. The following options are supported: foldcase|nofoldcase Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre- vious behavior of pcfs. The default is nofoldcase. FILES
/etc/mnttab table of mounted file systems /etc/vfstab list of default parameters for each file system ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWesu | +-----------------------------+-----------------------------+ SEE ALSO
mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS) NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym- bolic link refers, rather than on top of the symbolic link itself. SunOS 5.10 24 Nov 2003 mount_pcfs(1M)
All times are GMT -4. The time now is 05:33 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy