i have directly connect AIX pwer 7 to lenovo v3700 v2 without San through fiber card. but i cannot see the WWPN to add AIX as host in management console.
It might have been better to open this thread in the AIX part of the forum. I have just noticed this thread by chance.
Anyway, the WWPN of the adapter can be queried by
where "X" is some number (0, 1, 2, ...)
Depending on which OS version and driver (basically either SDD or SDDPCM) you use you can also try:
Depending on how you operate the system you can also find out the WWPN via the HMC if you have one.
Hello,
I have a V880 and a 420 running Solaris 9. Each box has more than one NIC card. I'd like to know how to configure the network on the two boxes so that I can directly connect the NIC cards. Meaning, I don't want a switch or router between the two. I just want to run a CAT5 cable to each... (3 Replies)
Hi,
I have a script in which i'm using ndm connect direct to fetch data from the client server..syntax i'm using is
./con_using_connectdirect /load/nctrl nctrl $xhost
where con_using_connectdirect is the script which establishes connection
load/nctrl is the path from where data... (4 Replies)
Hi,
I am configuring Connect direct on Solaries 6.0,
but whenever i am giving the below command
cdpmgr -i /export/app/cdunix/ndm/cfg/khello/initparm.cfg
i am getting the message
Component <cdpmgr ndmcmgr ndmsmgr ndmumgr cdstatm> permissions are not set.
Please follow instructions in the... (3 Replies)
Hi to all,
I've installed IBM Connect:Direct 4.1.00 on Red Hat Enterprise Linux Server release 5.5, but when I try to execute the "direct cli", I obtain the following error:
$ ./direct
***********************************************************
* ... (2 Replies)
Hello all,
I have a requirement to transfer files to mainframe usinf NDM connect:direct. So can anybody provide me a sample shell script on how to call a connect;direct script by providing filename as a parameter please?
Thanks,
Ajay (0 Replies)
I want to connect direct a xml file and a excel file each separately from unix system to another unix system.The size of the xml file and excel file may vary each time.
Below is the possible connect direct script to transfer the files.Please check if it is correct?
Also does DCB parameter... (4 Replies)
I am transfering a file using connect direct from Linux to Mainframe.
Its a point to point transfer but its failing with below error:
**** Error from CONNECT:Direct API - ndmapi_recvresp_c error
Can we do PTP transfers?
code tags for code, please. (1 Reply)
Hi..
We are using connect direct to transfer the files between servers. The CD scripts run on HP UX.
Below is the code using ndmcli.
ndmcli -x << EOJ
submit maxdelay=0 proc1 process snode=$3
step1 ... (1 Reply)
Hello,
We have an Power8 System (S822) and a IBM StorWize v3700 SAN.
The OS is AIX 7.1.
With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte).
I carved my volumes in the StorWize and presented to... (3 Replies)
Greetings Experts,
I am working for a bank client and have a question on connect-direct and SFTP.
We are using Linux RedHat servers. We use connect-direct to transfer (NDM) files from one server to another server. At times, we manually transfer the files using SFTP from one server to another... (2 Replies)
Discussion started by: chill3chee
2 Replies
LEARN ABOUT CENTOS
fcping
FCPING(8) Open-FCoE Tools FCPING(8)NAME
fcping - Fibre Channel Ping (ELS ECHO) tool
SYNOPSIS
fcping [-fqx] [ -i interval ] [ -c count ] [ -s size ] -h source target
source = interface | MAC | WWPN | FC-ID
target = -P WWPN | -N WWPN | -F FC-ID
DESCRIPTION
The fcping command performs the Fibre Channel FC-LS-2 ECHO ELS command and displays the reply. The max payload for fcping is 2108 bytes.
When no -c is given, fcping will continue until user interrupts.
OPTIONS -f
Flood ping
-q
Quiet! just print summary
-x
Hex dump of responses
-i interval
Wait interval seconds between each ping
-c count
Stop after sending count pings
-h source
Source is interface like ethX, MAC address, WWPN, or FC-ID
-s size
Byte-length of ping request payload (max 2108)
-F FC-ID
Destination port ID
-P WWPN
Destination world-wide port name
-N WWNN
Destination world-wide node name
EXAMPLES
Sends ELS ECHO to Port FC-ID 0xbf0027 from interface n0.170 with max 3 pings.
fcping -c 3 -h n0.170 -F 0xbf0027
sending echo to 0xBF0027
echo 1 accepted 16.170 ms
echo 2 accepted 7.053 ms
echo 3 accepted 6.803 ms
3 frames sent, 3 received 0 errors, 0.000% loss, avg. rt time 10.009 ms
Sends ELS ECHO to WWNN 0x1000001B213C9DDA from interface n0.170 with max 3 pings and payload size 1500 bytes
fcping -c 3 -h n0.170 -s 1500 -N 0x1000001B213C9DDA
sending echo to 0xBF0027
echo 1 accepted 6.597 ms
echo 2 accepted 6.925 ms
echo 3 accepted 12.419 ms
3 frames sent, 3 received 0 errors, 0.000% loss, avg. rt time 8.647 ms
Sends ELS ECHO to WWNN 0x1000001B213C9DDA from interface n0.170 continuously with payload of 32 bytes and hex-dump the reply to the screen
fcping -x -h n0.170 -s 32 -N 0x1000001B213C9DDA
sending echo to 0xBF0027
echo 1 accepted 6.937 ms
response length 32
0 02000000 00000001 00010203 04050607
10 08090a0b 0c0d0e0f 10111213 14151617
echo 2 accepted 6.923 ms
response length 32
0 02000000 00000002 00010203 04050607
10 08090a0b 0c0d0e0f 10111213 14151617
echo 3 accepted 84.929 ms
response length 32
0 02000000 00000003 00010203 04050607
10 08090a0b 0c0d0e0f 10111213 14151617
SEE ALSO fcoeadm(8)SUPPORT
fcping is part of the fcoe-utils package, maintained through the Open-FCoE project. Resources for both developers and users can be found at
the Open-FCoE website http://open-fcoe.org/.
Open-FCoE 05/24/2011 FCPING(8)