Sponsored Content
Operating Systems AIX IBM Power 740 won't boot after firmware update Post 303021724 by MichaelFelt on Wednesday 15th of August 2018 01:15:08 PM
Old 08-15-2018
Did he install on temp or permanent side. If on temp you should be able to boot from the permanent side (old firmware).

It has been ages since I have updated firmware without an active partition to update from. Although I believe the preferred method now would be to try and use an HMC to update the system.

What 4 or 8 letter code does the panel show when you power on the system (also check the ASMI interface for the history of the codes).
 

10 More Discussions You Might Find Interesting

1. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

2. UNIX for Dummies Questions & Answers

how to do firmware update

Hi, am a new comer to the AIX side. i had 3 specific questions. 1) what is firmware 2) how to locate the firmware running on a unix server 3) how to do firmware update(is it something i download from IBM site) thanks everybody for taking the time and plz reply. karthik (5 Replies)
Discussion started by: karthikosu
5 Replies

3. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies

4. Solaris

How do i update firmware on X4500??

I have solaris X4500 with ILOM version 1.1.1. I want to update the firmware. I know that we need to use load -source tftp://tftpserver/image file But I do not understand what is the IP address of the tftp server that we need to type in there. Kindly, help me with this. Thank you (5 Replies)
Discussion started by: bharu_sri
5 Replies

5. Solaris

firmware update on t5120

Hi, I am using 3 t5120 sparc systems, OS solaris 10. I am confused by update manager behaviour and sun support. Sun support guy, tells me install patch : 136932-09 (#136932-09: Hardware/PROM: SPARC Enterprise T5120 & T5220 Sun System Firmware with LDOMS support) When I checked... (4 Replies)
Discussion started by: upengan78
4 Replies

6. AIX

Update firmware HBA

Hello I have a question I have several partitions P550 Aix 5.3 and I need to update the HBA firmware, in some partitions I have two HBA and in others I have one HBA only. My question is if I have to reboot my partitions after update the firmware level. and If I can do it online or I have... (2 Replies)
Discussion started by: lo-lp-kl
2 Replies

7. AIX

System P firmware update

I am interested whether should AIX Admin make upgrade of firmware on power systems or IBM support should do it thanks in advance :-) (3 Replies)
Discussion started by: Vit0_Corleone
3 Replies

8. Hardware

2540 firmware update

Hi Guys and Gals, does anyone know how to update the firmware on the drives in a storagetek 2540? Thanks in advance Rgrds Martin (0 Replies)
Discussion started by: callmebob
0 Replies

9. AIX

IBM Power Pseries Open Firmware boot / VIOS POWERVM VET CODE

Hello, I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization. So when booted , it goes into OPEN Firmware I/O Hosting requires a hosting partition boot not permitted exit called > ok Panel shows > IO... (3 Replies)
Discussion started by: filosophizer
3 Replies

10. Hardware

M5000 won't power up

on an m5000 , I can not power it up, system failure. XSCF> poweron -a DomainIDs to power on:00,01 Continue? :y 00 :Not powering on :Poweron canceled due to missing component. 01 :Not powering on :Poweron canceled due to missing component. the only fault that I can see is: ... (4 Replies)
Discussion started by: goya
4 Replies
IPRUPDATE(8)						      System Manager's Manual						      IPRUPDATE(8)

NAME
iprupdate - IBM Power RAID adapter/device microcode update utility SYNOPSIS
iprupdate iprupdate --debug --check_only --daemon --use-polling --use-uevents DESCRIPTION
iprupdate is used to update the microcode on IBM storage adapters and the disk units attached to them to a minimum supported level. It can be run at any time while the ipr device driver is loaded. The utility will check the microcode revision level of each storage adapter/disk unit on the system and compare it to the microcode revision level that is installed in /etc/microcode, /usr/lib/microcode, and /lib/firmware. If the microcode level on the adapter/device is below the minimum supported level and the level of the latest image is newer, the microcode will be updated to the latest level available. It is desired that this be called in the boot process. OPTIONS
--version Print the version number of iprupdate --debug Enable additional error logging. Enabling this will result in additional errors logging to /var/log/messages. --check_only Check if any adapters or disk units are below their minimum supported level. --daemon Run as a daemon to handle adapters and devices being hotplugged. --use-polling Do not use netlink/uevent notification, but rather poll for adapter and device configuration changes. --use-uevents Use netlink/uevent notification rather than polling for adapter and device configuration changes. If not specified, polling will be used until the first uevent notification appears, then netlink will be used. AUTHOR
Brian King (brking@us.ibm.com) February 2005 IPRUPDATE(8)
All times are GMT -4. The time now is 12:56 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy