07-31-2018
So, I sat down yesterday and went completely through all of the steps I had performed with my latest VM, and after careful scrutiny I found that I had assigned the same IP address to both the Host NIC and the OpenServer VM!! Duh. I decided to start over from scratch one more time, and I now have a working VM that my physical machine is able to connect to via FTP!!
From what I observed this time here are the important steps:
1 - Use "bridged" mode for the virtual network card (but be sure to assign different IPs to the host and the vm!)
2 - Add a Host record to the local DNS server for the OpenServer VM, and I also added the computer in AD Users and Computers - though I'm not sure if this was necessary.
3 - I don't know if this made a difference, but during the SCO setup this time, when it asked for which "security profile" to use, I selected "Low" instead of "Medium" which was the default.
I can only connect FTP in one direction - from physical to VM, but that should be all I need. I don't know why, but when I do try and FTP from VM to physical it says the system type is unknown. From physical to VM the FTP connection recognizes the system as UNIX.
Anyway, now I have copied a few files over, but I want to try and copy some entire directories, and I think I need to use cpio rather than tar? I'm trying to read about both and it's a little confusing to me. What I want to do is make separate archive files containing contents of the directories in my physical machine, then ftp those over to the vm where I can extract them to where they belong.
I understand with cpio I can "pipe" the results to a single file (using a .cpio extension?), but what I don't get is do I use the "find" command or the "ls" command? I think it would save me a lot of time if someone here could offer me the exact syntax to use in order to accomplish this goal. Also I know with cpio there is a way to get the files extracted to their "absolute" path over on the VM, but I can't seem to grasp the syntax for this either. I could really use some help with this last part - and I appreciate it a lot. Thanks.
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
Hi,
I am facing a weired problem in my FTP script. I want to transfer multiple files from remote server to local server everyday, using mget * in my script. I also, want to send an email for successful or failed FTP. My script works for file transfer, but it don't send any mail. There is... (2 Replies)
Discussion started by: berlin_germany
2 Replies
2. Solaris
I am using shell script to do secure ftp. I have done key file setup to do password less authentication. Following are the FTP Details:
FTP Client has Sun SSH.
FTP Server has F-Secure.
I am using SCP Command to do secure copy files. When I am doing this, I am getting the foll error
scp:... (2 Replies)
Discussion started by: ftpguy
2 Replies
3. Shell Programming and Scripting
Hi Experts...
Greetings for the day..!
I just want to FTP the files to mainframe system..
my code is not working..and also i need to put the files in a particular directory in a specific naming format...
ftp -i -n ${HOST_NAME} << END_FTP
user ${USER_NAME} ${PASSWORD}
put ${FILE_NAME}... (3 Replies)
Discussion started by: spkandy
3 Replies
4. UNIX for Dummies Questions & Answers
Hi,
I want to run a process on server a, pulling files from server b and pushing it to server c.
Can i do that without dropping the files on server a?
Thanks,
Samit (2 Replies)
Discussion started by: samit_9999
2 Replies
5. Filesystems, Disks and Memory
Hi ,
We are facing a weird problem in our project. we need to send some xml & audio files to a remote FTP server from a Linux box, we are doing this in Perl script using Net::FTP->. Issue here is.. when FTPed the files using Perl scripts, only empty files ( 0 byte) are getting created on the... (2 Replies)
Discussion started by: kishorepotta
2 Replies
6. Shell Programming and Scripting
script for to take files from FTP server to UNIX server and Unzipped that files (1 Reply)
Discussion started by: sunilamarnadh
1 Replies
7. Shell Programming and Scripting
Validating the size of file transferred from ftp server to the local system.
File type: Text file/Flat file
Source System: Windows / Unix Systems
Target System is always: Unix
Mode of Transfer : ASCII
We have generic ftp shell script that transfers the files from different ftp servers. ... (2 Replies)
Discussion started by: jpundalik
2 Replies
8. Shell Programming and Scripting
I am trying to FTP files to a Windows server through my Linux machine. I have setup the file transfer with no problems but am having problem deleting those files from the Linux box. My current non-working solution is below. Any ideas, anyone?? :wall: Please be gentle, I'm fairly new to this... (4 Replies)
Discussion started by: jmalfhs
4 Replies
9. Shell Programming and Scripting
Hi,
I'm new to shell script..I have one requriement like -
In one server have more than one files,I want to ftp those files to some otehr server..
Ex : test1.pdf
test2.pdf
Please suggest me how to do (3 Replies)
Discussion started by: venkaswa
3 Replies
10. Solaris
I need to transfer files from a Windows server to the Unix server and have to run some shell script on it to get the required output.
Is it possible to transfer files from Windows server to unix server through any shell script?
If so can you please help me with the details.
Thanks in... (8 Replies)
Discussion started by: ssk250
8 Replies
FTPFS(4) Kernel Interfaces Manual FTPFS(4)
NAME
ftpfs - file transfer protocol (FTP) file system
SYNOPSIS
ftpfs [ -/dq ] [ -m mountpoint ] [ -a password ] system
DESCRIPTION
Ftpfs dials the TCP file transfer protocol (FTP) port, 21, on system and mounts itself (see bind(2)) on mountpoint (default /n/ftp) to pro-
vide access to files on the remote machine. If required by the remote machine, ftpfs will prompt for a user name and password. The user
names ftp and anonymous conventionally offer guest/read-only access to machines. Anonymous FTP may be called without user interaction by
using the -a option and specifying the password.
By default the file seen at the mount point is the user's remote home directory. The option -/ forces the mount point to correspond to the
remote root.
To avoid seeing startup messages from the server use option -q. To see all messages from the server use option -d.
To terminate the connection, unmount (see bind(1)) the mount point.
EXAMPLE
You want anonymous FTP access to the system export.lcs.mit.edu. The first import(4) command is only necessary if your machine does not
have access to the desired system, but another, called gateway in this example, does.
import gateway /net
ftpfs -a yourname@yourmachine export.lcs.mit.edu
SOURCE
/sys/src/cmd/ftpfs
SEE ALSO
bind(2)
BUGS
Symbolic links on remote Unix systems will always have mode 0777 and a length of 8.
After connecting to a TOPS-20 system, the mount point will contain only one directory, usually /n/ftp/PS:<ANONYMOUS>. However, walking to
any valid directory on that machine will succeed and cause that directory entry to appear under the mount point.
Ftpfs caches files and directories. A directory will fall from the cache after 5 quiescent minutes or if the local user changes the direc-
tory by writing or removing a file. Otherwise, remote changes to the directory that occur after the directory has been cached might not be
immediately visible.
There is no way to issue the appropriate commands to handle special synthetic FTP file types such as directories that automatically return
a tar of their contents.
FTPFS(4)