hi Raj
thanks for reply.
how to check file system? in my folders i cleared all that don't need. but still same problem. and where to remove log files? kindly explain, i am new to this particular system.
Regards
Hello kkm,
You haven't mentioned which O.S you are using? In case you are on *NIX system you could use uname -a command to check O.S complete details. Then you could check your file system's complete details by df command which tells how much capacity system is having. For clearing the file you should NEVER delete your actual/working data/Binaries you should only delete junk or log files(it depends on your software where they store it, I am not sure about it since you haven't mentioned any details).
You could use command:
Above will give you all the files which are more than 500 MB size then you could take decision which ones are junk files(but again fair warning be very careful on *NIX systems we DO NOT have recycle bin so be very careful before deleting anything too). Also you could hit THANKS button at left of each post to anyone if you feel post is useful to you too, cheers and enjoy learning.
NOTE: I have used 500M in find command you could change size too in that command in case you DO NOT see any 500 MB size file in your system.
Thanks,
R. Singh
Last edited by RavinderSingh13; 07-29-2018 at 02:54 AM..
This User Gave Thanks to RavinderSingh13 For This Post:
Hi,
I've tried to find answer to this question in the forums but i haven't found it.
How can i know the space left in my devices (tape, disk, floppy, etc...)?
It is very important to know at least the free space in the TAPE device.
Can someone help?
Thanx in advance.
Jorge (1 Reply)
I have a SCO UNIX on my Server. When I last tried to shutdown my system, I got an error message
“no space left on device”.
Now when I try to boot the system again, I
just can't and I get the same error message. Please help! (2 Replies)
Ok, don't shoot me! I have looked all over the forum for the issue I'm having and I don't think its a duh delete some files or I deleted them but its still showing 100% type thing.
This morning one of my servers starts crying that it can't write log files and I can't use vi etc.... when I check... (1 Reply)
Hi all,
A very strange problem I have this morning with my Solaris 8.
I have a FS full, I deleted some files but the system doesn't seems to reallocate the free space (I'm using Veritas):
df -k :
/dev/vx/dsk/dlds02vg/dlds02oralv 4194304 4194304 0 100% /dlds02/lds/oracle
... (4 Replies)
We are using this function tmpfile() :
FILE *tmpfp ;
if ((tmpfp = tmpfile()) == NULL)
{
fprintf(stderr, "%s: ERROR: init_operator(): ", ROUTINE);
perror("tmpfile()");
exit(ERR_OPEN);
}
and the above is raising error :
MSMD0603: ERROR:... (3 Replies)
hello all,
i have a proc binary that we run on unix environment, and it is generating this error
'' tstfile(): No space left on device ''
can you please assist on how to narrow down the problem?
thanks (4 Replies)
hi guys, me again ;)
i recently opened a thread about physical to zone migration.
My zone is mounted over a "bigger" LUN (500GB) and step is now to move the old files, from the physical server, to my zone.
We are talking about 22mio of files.
i used rsync to do that and every time at... (8 Replies)
Hi,
We are trying to sort the 40GB file in unix and getting following error.
Error:
sort: can't write /var/tmp/stmAAAvsaGfJ.00002929: No space left on device
sort -t ',' -k4 $DIR/INF_ff_FULL.dat >>$DIR/Sort_INF_ff_FULL.dat; 2>$DIR/sort_error.log
Can you please advise how to... (2 Replies)
Hi All,,
I had installed my solaris 10 over VMware and allocated 100 GB space. yet wehen i am installing weblogic. it says "no space left on device"
when i run df -k :-
------
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0d0s0 4864825 4779400 36777 ... (7 Replies)
Hello all
posting here after scanning the net and tried most of the things offered
still no solution that worked
when I do :
$ df -h
Filesystem Size Used Avail Use% Mounted on
footmpfs 7.9G 60K 7.9G 1% /dev
tmpfs 7.9G 0 7.9G 0% /dev/shm
/dev/da1 ... (3 Replies)
Discussion started by: umen
3 Replies
LEARN ABOUT CENTOS
checkpc
CHECKPC(8) checkpc command CHECKPC(8)NAME
checkpc - check out the printcap database
SYNOPSIS
checkpc [ -aflprsV ] [ -Aage[DHMS] ] [ -Ddebugflags ] [ -Pprinter ] [ -t size[kM] ]
DESCRIPTION
Checkpc is used to check for the existence and correct permissions of entries in the printcap database. It is useful when installing a new
printcap database and cleaning up existing printer spoolers.
-a Do not create accounting files (:af).
-f The fix flag will cause the checkpc program create and fix various files and permissions. It does this in a simple minded manner,
and the program may have to be run several times until all permissions are correct. It also reports in extremely verbose details
its actions.
-l Do not create log files (:lf).
-p Print verbose printcap information. Useful if interested in the printcap values.
-r remove junk or job files older than the age set by -A. You must set the age to a non-zero value otherwise no files are removed.
-s Do not create filter status files (:ps).
-A Age[DHMS]
Report junk or job files older than age. The age time can have a suffix days (D) hours (H), minutes (M), or seconds (S); default is
days.
-D debugflags
Run the program with debugging flags. See the LPRng HOWTO for details of the flags actions.
-V Verbose mode.
-P printer
Process only the specified print queue.
-t size[kM]
Truncate log files (:lf) to the specified size in Kbytes or Mbytes (default is Mbytes).
-T serial-line
set process name and start feature test
ANNOYING FEATURES
If the -f(fix) option is specified and you do not run this as root, it will complain, but attempt to carry out the operations. This will
lead to a large number of failures reports if the ownership and/or permissions are incorrect.
FILES
The files used by LPRng are set by values in the printer configuration file and by configuration options. The following are a commonly
used set of default values.
/etc/lprng/lpd.conf LPRng configuration file
${HOME}/.printcap user printer description file
/etc/printcap printer description file
/etc/lprng/lpd.perms permissions
/var/run/lprng/lpd lock file for queue control
/var/spool/lpd spool directories
/var/spool/lpd/QUEUE/control queue control
/var/spool/lpd/QUEUE/log trace or debug log file
/var/spool/lpd/QUEUE/acct accounting file
/var/spool/lpd/QUEUE/status status file
SEE ALSO lpd.conf(5), lpc(8), lpd(8), lpr(1), lpq(1), lprm(1), printcap(5), lpd.perms(5), pr(1), lprng_certs(1), lprng_index_certs(1).
AUTHOR
Patrick Powell <papowell@lprng.com>.
DIAGNOSTICS
Most of the diagnostics are self explanatory. If you are puzzled over the exact cause of failure, set the debugging level on (-D5) and run
again.
The debugging information will help you to pinpoint the exact cause of failure.
HISTORY
LPRng is a enhanced printer spooler system with functionality similar to the Berkeley LPR software. The LPRng developer mailing list is
lprng-devel@lists.sourceforge.net; subscribe by visiting https://lists.sourceforge.net/lists/listinfo/lprng-devel or sending mail to lprng-
request@lists.sourceforge.net with the word subscribe in the body.
The software is available via http://lprng.sourceforge.net
LPRng 2007-02-22 CHECKPC(8)