Sponsored Content
Operating Systems Solaris How to increase the size of rpool in Solaris 11? Post 303020107 by Peasant on Friday 13th of July 2018 12:12:33 PM
Old 07-13-2018
You safely increase it on the storage side, not add additional luns to rpool.
After you expand the lun from the storage side, issue a fabric rescan.

If you have not used slice 2 (whole disk), you will need to expand the slice via format command.

Otherwise, issue a zpool set autoexpand=on rpool inside the ldom to see the space.

If you really want to add additional lun or using local disks i would suggest presenting the bigger lun to ldom.
Using zpool attach command mirror rpool to bigger disk.
After the re-silvering is complete detach the old disk from mirror using zpool detach.
After detach issue a autoexpand from above for rpool to grow.
Remove the old disk from ldom and set boot-device variable for that ldom to point to added disk instead of smaller one.

Hope that helps
Regards
Peasant.
These 2 Users Gave Thanks to Peasant For This Post:
 

10 More Discussions You Might Find Interesting

1. HP-UX

increase size

Hi All, one of the mount point in Hp ux server has reached 95% its a data base file and can not be deleted. so i want to know how to increase the size of mount point i am new to unix ,please help me (1 Reply)
Discussion started by: jyoti
1 Replies

2. Solaris

increase root file system size in solaris

Hi frnz, Need an urgent help... I have installed solaris 8 in a sunblade workstation with 136GB hdd. While installation it has taken a default filesystem size as 1.37GB for root. AFtr completing the installation i have extended the root partition to 130GB. But still df output shows... (4 Replies)
Discussion started by: sriram.s
4 Replies

3. UNIX for Dummies Questions & Answers

How to increase the filesystem size?

Hi.. I want to increase the file system size of any filesystem online, without using the Volume manager like LVMs, is it possible? & if yes then how? (3 Replies)
Discussion started by: Amol21
3 Replies

4. Solaris

increase Root size

Dear all, I am very new to solaris, I have installed solaris 10, i tried installing few softwares into file system, unfortunately system failed to install stating "No space left on device " i searched few threads and it says, we have to increase root size. where my root size is... (2 Replies)
Discussion started by: radhnki
2 Replies

5. Solaris

how to increase file size in solaris 10 os

hi, let me know how to increase file size in solaris 10 OS (4 Replies)
Discussion started by: meet2muneer
4 Replies

6. UNIX for Dummies Questions & Answers

Increase size to sd[b-c]

hi guys I am working on my vmware workstation. I have a /dev/sdb which is 5GB. I am using LVM. Now I increase /dev/sdb 2 more GB. fdisk -l shows 7 GB but pvscan still shows 5GB. how do I make my system recognize the new 7GB added and be able to add those to my physical volumen and... (1 Reply)
Discussion started by: kopper
1 Replies

7. Solaris

How to increase jvm size for solaris 10 (sparc) operating system

Hi, I have solaris 10 (sparc) operating system machine on which I have installed supported weblogic 10.3. It was installed properly. As we know weblogic uses jvm to run and uses a part of jvm memory. But I am facing one problem in which JVM is getting crashed again and again resulting my... (2 Replies)
Discussion started by: neeraj.tati
2 Replies

8. Red Hat

Increase the filesystem size

Hi I am using oracle linux 6.4. My hard drive capacity is 500 GB. my filesystem size onbly 50GB. I would like to extend my filesystem size to around 100GB. I tried many codes but still I am not able. this is the output of df -h : Filesystem Size Used Avail Use% Mounted on... (6 Replies)
Discussion started by: farshad
6 Replies

9. Solaris

Zfs rpool size

Hi everyone, I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced. Filesystem Size Used Available Capacity Mounted on rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Discussion started by: freshmeat
2 Replies

10. Solaris

Increase /tmp file system size dynamically in Solaris zone

Hi Please let me know how to increase the size of /tmp file system from 512m to 1024m dynamically without reboot in solaris zone # df -h Filesystem size used avail capacity Mounted on zones/zone1 11G 1.0G 10.0G 10% / /dev 11G 1.0G ... (6 Replies)
Discussion started by: sb200
6 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 02:37 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy