Fibre channel link down on booting Solaris server Post: 303020070

7 More Discussions You Might Find Interesting

1. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad:

2. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO...

3. Solaris

USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi , I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error...

4. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance.

5. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1...

6. Solaris

Fibre Channel link not ready on Netra 240

Hi, One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too. There are two disks of 72GB, both are mirrored in SVM. It complains about...

7. Solaris

Issue with Fiber Channel cards in Solaris

hi everone i am experiencing disconnectivity from storage to My database machines. i have doubt on my FC cards in my sparc T4-2 machines. i want to know how should i check from my solaris that whether the cards are ok or not because once the disks get disconnect from SAN so it come back again but...

LEARN ABOUT CENTOS

grub2-bios-setup

GRUB-BIOS-SETUP(3)					     Library Functions Manual						GRUB-BIOS-SETUP(3)

NAME

       grub-bios-setup -- Set up images to boot from a device.

SYNOPSIS

       grub-bios-setup [-a | --allow-floppy] [-b | --boot-image=FILE]
			[-c | --core-image=FILE] [-d | --directory=DIR]
			[-f | --force] [-m | --device-map=FILE]
			[-s | --skip-fs-probe] [-v | --verbose] DEVICE

DESCRIPTION

       You should not normally run this program directly.  Use grub-install instead.

OPTIONS

       --allow-floppy
	      Make  the device also bootable as a floppy.  This option is the default for /dev/fdX devices.  Some BIOSes will not boot images cre-
	      ated with this option.

       --boot-image=FILE
	      Use FILE as the boot image.  The default value is boot.img.

       --core-image=FILE
	      Use FILE as ther core image.  The default value is core.img.

       --directory=DIR
	      Use GRUB files in the directory DIR.  The default value is /boot/grub.

       --force
	      Install even if problems are detected.

       --device-map=FILE
	      Use FILE as the device map.  The default value is /boot/grub/device.map .

       --skip-fs-probe
	      Do not probe DEVICE for filesystems.

       --verbose
	      Print verbose messages.

SEE ALSO

       info grub

								  Wed Feb 26 2014						GRUB-BIOS-SETUP(3)