Fibre channel link down on booting Solaris server Post: 303020034

7 More Discussions You Might Find Interesting

1. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad:

2. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO...

3. Solaris

USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi , I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error...

4. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance.

5. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1...

6. Solaris

Fibre Channel link not ready on Netra 240

Hi, One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too. There are two disks of 72GB, both are mirrored in SVM. It complains about...

7. Solaris

Issue with Fiber Channel cards in Solaris

hi everone i am experiencing disconnectivity from storage to My database machines. i have doubt on my FC cards in my sparc T4-2 machines. i want to know how should i check from my solaris that whether the cards are ok or not because once the disks get disconnect from SAN so it come back again but...

LEARN ABOUT ULTRIX

bootctl

BOOTCTL(1)							      bootctl								BOOTCTL(1)

NAME

       bootctl - Control the firmware and boot manager settings

SYNOPSIS

       bootctl [OPTIONS...] status

       bootctl [OPTIONS...] list

       bootctl [OPTIONS...] update

       bootctl [OPTIONS...] install

       bootctl [OPTIONS...] remove

DESCRIPTION

       bootctl checks, updates, installs or removes the boot loader from the current system.

       bootctl status checks and prints the currently installed versions of the boot loader binaries and all current EFI boot variables.

       bootctl list displays all configured boot loader entries.

       bootctl update updates all installed versions of systemd-boot, if the current version is newer than the version installed in the EFI system
       partition. This also includes the EFI default/fallback loader at /EFI/BOOT/BOOT*.EFI. A systemd-boot entry in the EFI boot variables is
       created if there is no current entry. The created entry will be added to the end of the boot order list.

       bootctl install installs systemd-boot into the EFI system partition. A copy of systemd-boot will be stored as the EFI default/fallback
       loader at /EFI/BOOT/BOOT*.EFI. A systemd-boot entry in the EFI boot variables is created and added to the top of the boot order list.

       bootctl remove removes all installed versions of systemd-boot from the EFI system partition, and removes systemd-boot from the EFI boot
       variables.

       If no command is passed, status is implied.

OPTIONS

       The following options are understood:

       -h, --help
	   Print a short help text and exit.

       --version
	   Print a short version string and exit.

       --path=
	   Path to the EFI System Partition (ESP). If not specified, /efi, /boot, and /boot/efi are checked in turn. It is recommended to mount
	   the ESP to /boot, if possible.

       -p, --print-path
	   This option modifies the behaviour of status. Just print the path to the EFI System Partition (ESP) to standard output and exit.

       --no-variables
	   Do not touch the EFI boot variables.

EXIT STATUS

       On success, 0 is returned, a non-zero failure code otherwise.

SEE ALSO

       Boot loader specification[1] systemd boot loader interface[2]

NOTES

	1. Boot loader specification
	   https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec

	2. systemd boot loader interface
	   https://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface

systemd 237																BOOTCTL(1)