Hi,
I do a telnet to a single server using command :telnet tibserver001 9640
The output i get is :
However i need to put all the servers in a single file and get the output to see if the server is connected or not.
The above does not seem to work. Is there a better way to script this ?
regards
Sam
Last edited by Don Cragun; 07-09-2018 at 03:31 PM..
Reason: Add missing ICODE tags.
Hello All,
Can somebody help me with this script. I have an output file with a list of servers ips and ports. I need to be able to run this script to list all the server ips in the outfile and find out if the port is open or not.
#!/bin/sh
IFS=#;for i in $(cat portTest);
do
# check... (2 Replies)
Hi all - i currently run a domain strifex.net. This domain has a dedicated IP address and in having that, should be able to run a ventrilo VoIP server from it. I uploaded all the needed files etc... and am able to connect to it, if and only if i enable DMZ to my local machine - then i am able to... (1 Reply)
Hi All,
I've been using this to verify if ports is open on a server. For example I would like to check port 5887, "telnet ip.of.server 5887" using on dos. If there's response on it then I can say it's open, if not then it's close.
Is that assumption accurate?
Thanks for any comments you... (4 Replies)
I have a ftp server on ssl talking on port 21, i would like to allow another port to acess the same server. I am not sure if its possible or not and if its how can i do that? (2 Replies)
Hi All,
I have a problem with auto telnet script, but I want to tell u something
a) I am only a member access on the server, so not able to access 'root' account
b) not able to install any software on server
3) On server, there is not install 'except'
I have to write a script, which is ran... (0 Replies)
Alright... this question comes from the fact that I'm trying to setup postfix to relay messages to Office 365 SMTP but its giving me connection refused... I read that if you have doubts if your port is open or not you should telnet to them so thats what I did.
This is a Red Hat 6.3 box.
My... (4 Replies)
I have a server with 6 Ethernet ports. 4 are the the motherboard based 1 GBE ports and 2 are 10 GBE ports on NICs.
I have set these all up with static IP addresses and use the standard /etc/nsswitch.files. My IP addresses are
net0 192.168.1.82
net1 192.168.2.82
and so on till
net5... (4 Replies)
I wish to grep for an entry in a file if it contains and does not start with #, Listen 443 or Listen 9443
Below is what helped me get Listen 443 but how can I tweak the below command to also include Listen 9443 port ?
Note: Listen 8443 or Listen 4438 should fail in the grep.
... (2 Replies)
Discussion started by: mohtashims
2 Replies
LEARN ABOUT SUNOS
telnetrc
telnetrc(4) File Formats telnetrc(4)NAME
telnetrc - file for telnet default options
DESCRIPTION
The .telnetrc file contains commands that are executed when a connection is established on a per-host basis. Each line in the file con-
tains a host name, one or more spaces or tabs, and a telnet(1) command. The host name, DEFAULT, matches all hosts. Lines beginning with the
pound sign (#) are interpreted as comments and therefore ignored. telnet(1) commands are case-insensitive to the contents of the .telnetrc
file.
The .telnetrc file is retrieved from each user's HOME directory.
EXAMPLES
Example 1: A sample file.
In the following example, a .telnetrc file executes the telnet(1) command, toggle:
weirdhost toggle crmod
# Always export $PRINTER
DEFAULT environ export PRINTER
The lines in this file indicate that the toggle argument crmod, whose default value is "off" (or FALSE), should be enabled when connecting
to the system weirdhost. In addition, the value of the environment variable PRINTER should be exported to all systems. In this case, the
DEFAULT keyword is used in place of the host name.
FILES
$HOME/.telnetrc
SEE ALSO telnet(1), in.telnetd(1M), environ(5)SunOS 5.10 9 Jan 1998 telnetrc(4)