This does not work, don't know what we are missing here.

KIndly advise.

---------- Post updated at 11:47 AM ---------- Previous update was at 11:17 AM ----------

BELOW IS THE DETAIL EXPLANATION OF THE ISSUE:-

Let me explain you the scenario

-There are 100 AIX clients which have few NAS volumes mounted on it.

-These NAS volumes are created on NetApp Storage.
-For AIX clients , they have separate IP called (NAS IP) for NAS volume operations.
-For NetApp Storage, it has LIF IP(Logical Interface )
-Destinastination port on Storage for NAS communication are 2049 and 111
-NAS comminucation happens between this NAS IP on AIX clients to LIF IP on NetApp Storage.
-There are below settings on AIX clients, which you can check with nfso -a
nfs_use_reserved ports= 1 (use ports less than 1024)
nfs_use_reserved ports= 0(use ports more than 1024)
-as per security rule we should keep as " 1" .
-however keeping "0" value here does resolve the NAS issue of mounting but it is not safe as per SCD to allow NAS coomunication to happen between aix client NAS IP and storage LIF IP on random ports.
-but when we keep 1 we face the issue as it only takes 1021 1022 1023 ports as source port for mounting.
-Now what issue we are facing currently with nfs_use_reserved ports= 1 settings, That I will explain you.

-So when we keep nfs_use_reserved ports= 1 settings
clients sends "SYN" from 1021 soruce port to 2049 port on Storage
Storage sends SYN,ACK to from 2049 to 1021 port.
clients sends ACK to from 1021 to 2049 port on storage,
so 3 way hand shake is done.
and at the end of this connection on storage is established on port 1021 and is active.
Next
clients sends "SYN" from 1022 soruce port to 2049 port on Storage
Storage sends SYN,ACK to from 2049 to 1022 port.
clients sends ACK to from 1022 to 2049 port on storage,
so 3 way hand shake is done.
and at the end of this connection on storage is established on port 1022 and is active and now on storage both connection from client on ports 1021 and 1022 are active.
now here comes the problem part:-
dont know some how the connection from client gets broken on one port, lets say 1021 and clients starts sending the SYN request on port 1021 again ,BUT the connection broken info does not reach to storage and it remains active on port 1021.SO when client sends SYN request again from source port 1021, storage responds with ACK ( as connection is already established ) rather than SYN,ACK so firewall which sits in between the client and storage drops this packet from storage rather than reseting the connection, the result of which the client keeps on sending the SYN request from same source port 1021 and we face the issue of NAS mount points as NAS mount points dont get mounted on clients.
but when we keep nfs_use_reserved ports= 0 it uses random ports and still now we have not face any NAS issue on that client,

So my question is that how to define specific NAS source ports on AIX clients?

Hope you all have understood my issue now.

Let us know if any query.
Thanks