I took the backup, destroyed pool, replace disks and created new pool - zones3
Now, instead of putting in raidz1, I just want to create mirror of zones3. With below configuration, if one disk fails, data will be lost. I have two new disks- c1t4d0 and c1t6d0
Is it correct command to run ?
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Actually have a few different issues, wondering if I could get input on (tried reading/searching for an answer, with no luck)
1. Have a v240 running sol9 that needs a bad disk replaced. So, here are the steps I took:
a. detached from mirroring
b. cleared mirroring (metaclear)
c.... (4 Replies)
All,
Here is the situation. Four 72GB hard drive installed on Sun V-240 server. HDD3 has gone bad. The server will not boot up completely. It keeps booting into single user mode. FSCK has been run and it did not fix the problem. I believe the harddrive is bad and needs to be replaced.
The... (1 Reply)
I have had a little issue with one of my disks, the usb cacble was pulled out and one of the external drives on it would no longer mount. I used First Aid and it verified and repaired both OK / nothing to do). After lots of messing around and not being able to mount I used Drive Genius 2 and that... (1 Reply)
Hello,
I'm brand new to Sun/Solaris.
I have a Sun Blade 150, with SunOS 5.8.
I wanted to make a backup to prevent future data loss, so I put the disk in a normal PC with Windows XP to try to make a backup with Norton Ghost, the disk was detected, but not the file volume, so I place the disk... (6 Replies)
Originally Posted by panos83
Hello there Sir,
according to this old post,
https://www.unix.com/sco/100001-warni...ler-found.html
i try to restore an old image to a new hard disk drive.
The problem is that i don't have basic information such as:
1) Which btld driver do i... (3 Replies)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
This is first time post...found this forum when looking for possible solution to fix my sun pc. Just one day can't boot it already showing the following:
Boot device: disk File args:
Bad magic number in disk label
Can't open disk label package
Evaluating: boot
Can't open boot device... (40 Replies)
Hi Guys,
I have fresh new installed VIO 2.2.3.70 on a p710, 3 physical SAS disks, rootvg on hdisk0
and 3 VIO clients through vscsi, AIX7.1tl4 AIX6.1tl9 RHEL6.5ppc, each lpar has its rootvg installed on a LV on datavg (hdisk2) mapped to vhost0,1,2
There is no vg on hdisk1, I use it for my... (1 Reply)
Discussion started by: frenchy59
1 Replies
LEARN ABOUT PHP
systemd-networkd-wait-online.service
SYSTEMD-NETWORKD-WAIT-ONLINE.SERVICE(8) systemd-networkd.service SYSTEMD-NETWORKD-WAIT-ONLINE.SERVICE(8)NAME
systemd-networkd-wait-online.service, systemd-networkd-wait-online - Wait for network to come online
SYNOPSIS
systemd-networkd-wait-online.service
/lib/systemd/systemd-networkd-wait-online
DESCRIPTION
systemd-networkd-wait-online is a one-shot system service that waits for the network to be configured. By default, it will wait for all
links it is aware of and which are managed by systemd-networkd.service(8) to be fully configured or failed, and for at least one link to
gain a carrier.
OPTIONS
The following options are understood:
-i, --interface=
Network interface to wait for before deciding if the system is online. This is useful when a system has several interfaces which will
be configured, but a particular one is necessary to access some network resources. This option may be used more than once to wait for
multiple network interfaces. When used, all other interfaces are ignored.
--ignore=
Network interfaces to be ignored when deciding if the system is online. By default, only the loopback interface is ignored. This option
may be used more than once to ignore multiple network interfaces.
--timeout=
Fail the service if the network is not online by the time the timeout elapses. A timeout of 0 disables the timeout. Defaults to 120
seconds.
SEE ALSO systemd(1), systemd-networkd.service(8)systemd 237SYSTEMD-NETWORKD-WAIT-ONLINE.SERVICE(8)