bonding: bond0: link status definitely down for interface eth1, disabling it
tg3 0000:03:00.1: eth1: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.1: eth1: Flow control is off for TX and off for RX
: tg3 0000:03:00.1: eth1: EEE is disabled
bond0: link status definitely up for interface eth1, 100 Mbps full duplex.
tg3 0000:03:00.1: eth1: Link is down
bonding: bond0: link status definitely down for interface eth1, disabling it
tg3 0000:03:00.1: eth1: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:03:00.1: eth1: EEE is disabled
bond0: link status definitely up for interface eth1, 100 Mbps full duplex.
tg3 0000:03:00.1: eth1: Link is down
bonding: bond0: link status definitely down for interface eth1, disabling it
tg3 0000:03:00.1: eth1: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:03:00.1: eth1: EEE is disabled
bond0: link status definitely up for interface eth1, 100 Mbps full duplex.
uname -r = 2.6.32-279.el6.x86_64
modinfo tg3 = 3.122
Why the eth1 always down every 5 minutes?
Regards
Marry Jane
Moderator's Comments:
Please use CODE tags as required by forum rules!
Last edited by RudiC; 05-16-2018 at 05:20 AM..
Reason: Added CODE tags.
Hi, folks.
Sorry for bothering, but maybe someone could help me please.
The problem is the following:
there is some script that copies files from local file system to AFS. The copying is performed with dd command.
The script copies data into some AFS volumes.
The problem appeared with one... (0 Replies)
Hi
Please help me with the following problem with my script.
The following block of code is not repeating in the while loop and exiting after searching for first message.
input_file
==========
host001-01
host001-02
2008-07-23 13:02:04,651 ConnectionFactory - Setting session state... (2 Replies)
Hi
I am right now facing a strange hardware problem. System get booted with the following error:
Fatal Error Reset
CPU 0000.0000.0000.0003 AFSR 0100.0000.0000.0000 SCE
AFAR 0000.07c6.0000.1000
SC Alert: Host System has Reset
It happen 4 or 5 times and get the same error every time.I... (8 Replies)
1) when user login to the server the session got colosed. How will resolve?
2) While firing the command ls -l we are not able to see the any files in the director. but over all view the file system using the command df -g it is showing 91% used. what will be the problem?
Thanks in advance. (1 Reply)
Hi,
i've a redhat linux 9 upadated by redhat from 7 version to 9 version. A couple of days ago i was a problem with my mail, in other words i'm not able to get any email nor to send any email. I've a proxy configuration and i tried to set iptables in order to verify the port. The 110,255 and 995... (1 Reply)
At work I am trying to get this one Linux machine (let's call it ctesgm07) to behave like another Linux machine that we have (let's call it test007).
test007 returns the following version info:
cat /etc/debian_version: lenny/sid
uname -a: Linux test007 2.6.27-7-generic #1 SMP Tue Nov 4... (0 Replies)
Hi,
This is rather a question from a "user" than from a sys admin, but I think this forum is apropriate for the question.
I have an adress with automatic email forwarding and for some senders (two hietherto), emails are bouncing. This has really created a lot of problems those two time so I... (0 Replies)
We recently had some HP DL380 G8 servers delivered and I have installed RHEL 5.6 and 5.8 on them. Both OS use the Tegon3 driver for the BCM 5719 onboard NICs.
Trouble I had was when any command expecting a lot of output ie sysctl -a was run the system hangs up and stops responding to ping for... (0 Replies)
I don't know if you guys get this problem sometimes at Terminal but I had been having this problem since yesterday :( Maybe I overdid the Terminal. Even the codes that used to work doesn't work anymore.
Here is what 's happening:
* I wanted to remove lines containing digits so I used this... (25 Replies)
Hi everyone,
I am experiencing discontinuity of Internet service, this started 1 month ago. Everything worked very well for 1 year of intensive use, but now, I have problems reaching my gateway.
The gateway is not my router but a node belonging to my ISP and I share the same public IP with... (3 Replies)
Discussion started by: remic
3 Replies
LEARN ABOUT DEBIAN
ifenslave-2.6
IFENSLAVE(8) BSD System Manager's Manual IFENSLAVE(8)NAME
ifenslave -- Attach and detach slave network devices to a bonding device.
SYNOPSIS
ifenslave [-acdfhuvV] [--all-interfaces] [--change-active] [--detach] [--force] [--help] [--usage] [--verbose] [--version] master slave ...
DESCRIPTION
ifenslave is a tool to attach and detach slave network devices to a bonding device. A bonding device will act like a normal Ethernet network
device to the kernel, but will send out the packets via the slave devices using a simple round-robin scheduler. This allows for simple load-
balancing, identical to "channel bonding" or "trunking" techniques used in switches.
The kernel must have support for bonding devices for ifenslave to be useful.
OPTIONS -a, --all-interfaces
Show information about all interfaces.
-c, --change-active
Change active slave.
-d, --detach
Removes slave interfaces from the bonding device.
-f, --force
Force actions to be taken if one of the specified interfaces appears not to belong to an Ethernet device.
-h, --help
Display a help message and exit.
-u, --usage
Show usage information and exit.
-v, --verbose
Print warning and debug messages.
-V, --version
Show version information and exit.
If not options are given, the default action will be to enslave interfaces.
EXAMPLE
The following example shows how to setup a bonding device and enslave two real Ethernet devices to it:
# modprobe bonding
# ifconfig bond0 192.168.0.1 netmask 255.255.0.0
# ifenslave bond0 eth0 eth1
AUTHOR
ifenslave was originally written by Donald Becker <becker@cesdis.gsfc.nasa.gov>, and has since been updated by various kernel developers.
This manual page was written by Guus Sliepen <guus@debian.org> for the Debian GNU/Linux system.
Debian GNU/Linux June 1, 2019 Debian GNU/Linux
05-16-2018
