You probably won't be surprised to learn that I haven't actually done, or tried this, myself, but researching it I think that you can query an external NTP server from your internal NTP server WITHOUT actually updating its clock, and then compare the two for difference.
On your internal NTP server on which you want to monitor drift, set up the NTP config file with a single server entry to an external NTP/PTP server and include the server option 'noselect'.
When the NTP query runs it will not update the clock but the offset can be viewed using
or
You don't say what Unix/Linux you are running (EDIT: Sorry you posted to the HP-UX forum) and therefore I cannot say what NTP commands are implemented on it. You will have to test the function manually first and then get one of the scripting experts on this forum to help you if you need it. You will, of course, also need to include a function to update the clock for real when it gets too far adrift.
I have a script which must not be run more than once at any given time. THis script will be scheduled to run every 20 mins as a cron job.
In my script can i have logic to say if this script is already running from the previous cron, then exit.
How do i go about doing that. If you describe the... (11 Replies)
Hi guys I'm very new to unix and I have to create an awk script that detects webpage addresses from a file/webpage and outputs how many times each webpage was detected.e.g. if my file was:
(Note: The symbol " was added to stop them being created into links)
"www.google.com"... (1 Reply)
Hi guys I'm very new to unix and I have to create an awk script that detects webpage addresses from a file/webpage and outputs how many times each webpage was detected.e.g. if my file was:
www.google.com
www.facebook.com
www.google.com
the output should be:
www.google.com x2... (2 Replies)
Dear community,
what I'm try to do is deny users to run a script without parameters from command bash, but the same script should run without parameters only from crontab.
Example runs by crontab:*/5 * * * * /tmp/script.sh
Here the normal execution starts every 5 minutes
Example #1 runs by... (16 Replies)
I have to check daily 20 processes each day. The names are like Network1 Network2 Network3 ....... Network20.
There is built in utility for doing this. Following is the command to check a single network process.
check_process_status 1
If we want to check the status of Network2 then the... (6 Replies)
Hi all,
I am needing some help with a script that will search for a video file by known extensions and then do a pattern search (I'm guessing via regex) and then based on a match of one type of another move the file to an assigned directory.
I would like to do this with either a shell script... (7 Replies)
Hi forum,
So I am trying to determine the OS type with the following script:
#!/usr/bin/sh
OStype1=`uname -s`
Sunos1=SunOs
if
then
echo "This system is Linux"
exit 0
elif
then
echo "This system is SunOs"
exit 0
elif (1 Reply)
Hello there,
I am not an expert in networking related stuff but I got a requirement to create UNIX script to query our Company's internal time source via NTP for time drift detect and report it when > +/- 50ms.
I have been googling a lot but thought to post it in this forum to get a... (1 Reply)
Hello,
I have a small script and it runs from web application in below format:
pipe:///path_to_myscript.sh url1 url2 url3
myscript.sh:
#!/bin/bash
count=0
while
do
count=$((count+1))
exec 3>&1
((ffmpeg -i $1 ...... -f mpegts pipe:1 2>/dev/null 1>&3 ) 2>&1 | \
while read LINE; do echo... (9 Replies)
Discussion started by: baris35
9 Replies
LEARN ABOUT ULTRIX
ntp.conf
ntp.conf(5) File Formats Manual ntp.conf(5)Name
ntp.conf - Network Time Protocol configuration file
Description
The file is the configuration file for the Network Time Protocol (NTP) daemon, This file must be configured on your system before running
Any host names that you specify in the file must have an entry in the file, or an entry in the master database, if the database is being
served to your system by BIND/Hesiod or Yellow Pages.
The file has four entry formats:
trusting no
This entry guarantees that your system synchronizes only to the NTP servers identified in the peer and server entries specified. Dig-
ital recommends that all systems include the entry.
peer server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system may also provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP servers should be configured with entries.
server server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system can not provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP clients should be configured with entries.
peer /dev/null LOCL 1 -5 local
This entry identifies your system as a local reference clock. A local reference clock is the most accurate system clock available at
your site. If you receive time synchronization from the Internet NTP service, you should not include this entry on any of your sys-
tems. At most, one system in a set of nodes running should be identified as a local reference clock.
A host which specifies this entry should not specify any or entries.
Examples
This is a sample configuration file for an NTP client which receives time synchronization from the NTP servers: and Lines beginning with a
number sign (#) are comments.
#
# NTP Configuration File
# This file is mandatory for the ntpd daemon
#
#
#
# ** A L L **
#
# "trusting no" prevents this host from synchronizing
# to any host that is not listed below. It is recommended
# that all hosts include the line "trusting no".
#
trusting no
#
#
# ** S E R V E R **
#
# If you are configuring a server, use "peer" entries to
# synchronize to other NTP servers. For example, server1,
# server2, and server3.
#
#peer server1
#peer server2
#peer server3
#
#
#
#
# ** C L I E N T **
#
# If you are configuring a client, use "server" entries to
# synchronize to NTP servers. For example, server1, server2,
# and server3.
#
server server1
server server2
server server3
#
#
#
# ** L O C A L R E F E R E N C E C L O C K **
#
# If you are configuring a local reference clock, include the
# following entry and the "trusting no" entry ONLY.
#
#peer /dev/null LOCL 1 -5 local
#
See Alsontp(1), ntpd(8), ntpdc(8)
RFC 1129--Internet time synchronization: The Network Time Protocol
Introduction to Networking and Distributed System Services
ntp.conf(5)