So how about using an ethernet to serial adapter to gain access to the switch serial management port remotely? See attached.
Obviously I would recommend that you fully test the solution locally on an identical switch if you have one, before shipping to the remote site for somebody to simply plug in.
I've successfully used such devices to access serial ports of remote RAID controllers using nothing more than an IP address from PuTTy.
Just an idea. There are, of course, a variety of ethernet to serial adapters out there. Just search for them.
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser*
Problem is that when I go to mkdev serial, it is not there.
Anyone... (1 Reply)
Hi iam new bie to unix.
we are getting the sensor positional values on hyperterminal(UART).but
our task is to use this data for mouse movement.so wat we hav to do ??
is this required to change usb driver cud u send info regarding my query??
Thanks in advance :) :) :) (1 Reply)
Hi Community,
I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly.
I've this problem, I'm connecting to Server with Putty client with this settings:
boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed... (4 Replies)
Hello AIX Group Members,
I have two systems: (1) IBM pSeries 640, 7026-B80. (2) A 5-month old HP laptop with Windows Vista. It has no serial port and only has USB ports on it.
My question are: How can I use the laptop as the p640's terminal? How can I make the connection? What type of cable... (4 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
SUBSYSTEM=="block",
SUBSYSTEM=="scsi",
ATTRS{idVendor}=="1e0e",
ATTRS{idProduct}=="f000",
ACTION=="add",
RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000"
After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
HI,
Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X
I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server.
Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies
LEARN ABOUT OSF1
iscc
iscc(7) Miscellaneous Information Manual iscc(7)NAME
iscc - serial communications interface
SYNOPSIS
controller iscc0 at isa0
DESCRIPTION
An onboard Zilog 8530 DUART provides AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
ports. Both serial communications ports can operate at baud rates from B50 to B38400, excluding B134 (see tty(7)).
On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01) is
available for use by application programs as an additional communications port.
In the absence of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.
Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.
RESTRICTIONS
Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured as
the serial system console. The iscc terminal driver enforces this restriction.
No modem control is supported for either the CON or AUX serial communications ports.
FILES
console terminal local terminal local terminal
RELATED INFORMATION console(7), devio(7), tty(7), MAKEDEV(8) delim off
iscc(7)