So how about using an ethernet to serial adapter to gain access to the switch serial management port remotely? See attached.
Obviously I would recommend that you fully test the solution locally on an identical switch if you have one, before shipping to the remote site for somebody to simply plug in.
I've successfully used such devices to access serial ports of remote RAID controllers using nothing more than an IP address from PuTTy.
Just an idea. There are, of course, a variety of ethernet to serial adapters out there. Just search for them.
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser*
Problem is that when I go to mkdev serial, it is not there.
Anyone... (1 Reply)
Hi iam new bie to unix.
we are getting the sensor positional values on hyperterminal(UART).but
our task is to use this data for mouse movement.so wat we hav to do ??
is this required to change usb driver cud u send info regarding my query??
Thanks in advance :) :) :) (1 Reply)
Hi Community,
I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly.
I've this problem, I'm connecting to Server with Putty client with this settings:
boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed... (4 Replies)
Hello AIX Group Members,
I have two systems: (1) IBM pSeries 640, 7026-B80. (2) A 5-month old HP laptop with Windows Vista. It has no serial port and only has USB ports on it.
My question are: How can I use the laptop as the p640's terminal? How can I make the connection? What type of cable... (4 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
SUBSYSTEM=="block",
SUBSYSTEM=="scsi",
ATTRS{idVendor}=="1e0e",
ATTRS{idProduct}=="f000",
ACTION=="add",
RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000"
After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
HI,
Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X
I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server.
Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies
LEARN ABOUT DEBIAN
cyclades-devices
cyclades-devices(5)cyclades-devices(5)NAME
cyclades-devices - tables for driving cyclades-serial-client
DESCRIPTION
The cyclades-devices file supplies all mapping between Unix device files (/dev/*) and the addresses of serial ports of Cyclades Terminal
Servers. It contains one entry for each serial port, with the following format:
device:rastype:rasname:physport:type:options
Note: A # character at beginning of line indicates a comment
The entry fields are:
devname
- A full pathname of the file that will be associated to the serial port. It must start with a "/dev/" preffix. Two naming schemes
may be used here: - devname does not exist, and will be linked to a free pseudo-tty. This is the default behavior of cyclades-ser-
cli. - devname is the name of a valid slave pseudo-tty. In this case, the '-t 1' option must be assigned in options field. (Note:
this option is not supported by this release).
rastype
- Terminal Server type: - prts, for Cyclades Pr302X/TS Terminal Servers. - path, for Cyclades PathRAS Terminal Server.
rasname
- Host Name or IP Address of the Terminal Server where the serial port resides.
physport
- Number of physical port in the Terminal Server. If treated as the IP address associated with this port, in a IP-based addressing
scheme.
type - Server type that will be contacted to handle the serial port: - rtelnet, for Remote Telnet Server - socket, for Socket Server
options
- Per-port specific options, passed to cyclades-ser-cli program.
EXAMPLES
1. Device on a PR3020/TS Terminal Server pr3k Port 1, accessed through /dev/ctty01 device file name, using telnet protocol (remote telnet
server)
/dev/ctty01:prts:pr3k:1:rtelnet:
2. The same device, but with an IP address pr3k_port1 associated to the serial port (IP-based port addressing)
/dev/ctty01:prts:pr3k_port1:0:rtelnet:
3. Device on a PathRAS Terminal Server pr3k Port 2, accessed through /dev/ctty02 device file name, using socket protocol (socket server)
/dev/ctty02:path:pr3k:2:socket:
FILES
/etc/cyclades-devices This file
SEE ALSO cyclades-serial-client(1), cyclades-ser-cli(1)cyclades-devices(5)