Sponsored Content
Operating Systems Linux Connect from USB to serial port of switch Post 303017145 by hicksd8 on Thursday 10th of May 2018 05:33:26 AM
Old 05-10-2018
So how about using an ethernet to serial adapter to gain access to the switch serial management port remotely? See attached.

Obviously I would recommend that you fully test the solution locally on an identical switch if you have one, before shipping to the remote site for somebody to simply plug in.

I've successfully used such devices to access serial ports of remote RAID controllers using nothing more than an IP address from PuTTy.

Just an idea. There are, of course, a variety of ethernet to serial adapters out there. Just search for them.
 

9 More Discussions You Might Find Interesting

1. Linux

modem - usb to serial configuration

I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0 I am using the device /dev/ttyUSB0 When I issue the command "mgetty ttyUSB0" I get the following output in the log file. How do I get the system to see the modem. 12/02 14:17:55... (2 Replies)
Discussion started by: jshoovie
2 Replies

2. SCO

Usb To Serial (sco6)

According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser* Problem is that when I go to mkdev serial, it is not there. Anyone... (1 Reply)
Discussion started by: jn5519
1 Replies

3. UNIX for Dummies Questions & Answers

USB serial help needed

Hi iam new bie to unix. we are getting the sensor positional values on hyperterminal(UART).but our task is to use this data for mouse movement.so wat we hav to do ?? is this required to change usb driver cud u send info regarding my query?? Thanks in advance :) :) :) (1 Reply)
Discussion started by: jayakar
1 Replies

4. Solaris

USB to Serial Adapter connection

Hi Community, I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly. I've this problem, I'm connecting to Server with Putty client with this settings: boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed... (4 Replies)
Discussion started by: Sunb3
4 Replies

5. AIX

How to connect PC's USB port to pSeries system?

Hello AIX Group Members, I have two systems: (1) IBM pSeries 640, 7026-B80. (2) A 5-month old HP laptop with Windows Vista. It has no serial port and only has USB ports on it. My question are: How can I use the laptop as the p640's terminal? How can I make the connection? What type of cable... (4 Replies)
Discussion started by: aixlover
4 Replies

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

7. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

8. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies

9. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies
UFTDI(4)						   BSD Kernel Interfaces Manual 						  UFTDI(4)

NAME
uftdi -- USB support for serial adapters based on the FT8U100AX and FT8U232AM chips SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device uftdi device ucom Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): uftdi_load="YES" DESCRIPTION
The uftdi driver provides support for various serial adapters based on the FTDI FT2232C, FT8U100AX and FT8U232AM chips. The device is accessed through the ucom(4) driver which makes it behave like a tty(4). HARDWARE
The uftdi driver supports the following adapters: o B&B Electronics USB->RS422/485 adapter o Elexol USB MOD1 and USB MOD3 o HP USB-Serial adapter shipped with some HP laptops o Inland UAS111 o QVS USC-1000 o Buffalo PC-OP-RS / Kurouto-shikou KURO-RS universal remote o Prologix GPIB-USB Controller SEE ALSO
tty(4), ucom(4), usb(4) HISTORY
The uftdi driver appeared in FreeBSD 4.8 from NetBSD 1.5. BSD
November 22, 2006 BSD
All times are GMT -4. The time now is 09:30 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy