/proc - /proc proc - no -
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /usr ufs 1 no -
/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /var ufs 1 no -
swap - /tmp tmpfs - yes -
#
I mount to //var/usr , and view all the content , but try to reboot again and again . It still come out this issue.
Code:
Hardware watchdog enabled
Configuring ATM interfaces:
NOTICE: VxVM not started
configuring IPv4 interfaces: bge0 bge3 ce0 ce3.
Hostname: devuardms01
mount: mount-point /usr does not exist.
/sbin/rcS: /usr/sbin/devfsadm: not found
/sbin/rcS: /usr/bin/loadkeys: not found
/etc/rcS.d/S35svm.init: rm: not found
/etc/rcS.d/S35svm.init: grep: not found
/etc/rcS.d/S35vxvm-startup1: /usr/lib/vxvm/voladm.d/lib/vxadm_lib.sh: not found
/sbin/swapadd: expr: not found
/sbin/swapadd: swap: not found
I boot from solaris 9 or 10 to copy those missing file but still not to work to boot up successfully.
---------- Post updated at 10:45 PM ---------- Previous update was at 10:40 PM ----------
Quote:
Originally Posted by linux_user
Hi
Here is my server vfstab
/proc - /proc proc - no -
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /usr ufs 1 no -
/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /var ufs 1 no -
swap - /tmp tmpfs - yes -
#I mount to / /var /usr , and view all the content , but try to reboot again and again . It still come out this issue.
Hardware watchdog enabled
Configuring ATM interfaces:
NOTICE: VxVM not started
configuring IPv4 interfaces: bge0 bge3 ce0 ce3.
Hostname: devuardms01
mount: mount-point /usr does not exist.
/sbin/rcS: /usr/sbin/devfsadm: not found
/sbin/rcS: /usr/bin/loadkeys: not found
/etc/rcS.d/S35svm.init: rm: not found
/etc/rcS.d/S35svm.init: grep: not found
/etc/rcS.d/S35vxvm-startup1: /usr/lib/vxvm/voladm.d/lib/vxadm_lib.sh: not found
/sbin/swapadd: expr: not found
/sbin/swapadd: swap: not found
fsck check all slice already
fsck -o f -y /dev/rdsk/
I boot from solaris 9 or 10 to copy those missing file but still not to work to boot up successfully.
Moderator's Comments:
Please use CODE tags as required by forum rules!
Last edited by RudiC; 04-16-2018 at 12:49 PM..
Reason: Added CODE tags.
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Hi
I hv try to install Solaris 9 on a SPARC machine. The machine now is with Solaris 10 OS.
I try to load a Solaris 9 installation cd in and use "boot cdrom" on ok promt, but it give me "no boot device found" when it boot up.
and when i use fsck, the system show me an error with the... (2 Replies)
Hello all.
I download last version from sun.com, unzip iso's and burn their to cd's.
When i try to load (on different machines) from first cd i receive this errors:
/kernel/fs/specfs: undefined symbol ''
/kernel/fs/specfs: undefined symbol ''
... several screens same message ....... (1 Reply)
Hi,
I was porting ipv4 application to ipv6; i was done with TCP transports. Now i am facing problem with SCTp transport at runtime.
To test SCTP transport I am using following server and client socket programs. Server program runs fine, but client program fails giving Invalid Arguments for... (0 Replies)
Hi!
I have Sun SPARC Enterprise T5140 with Solaris 10 and it unable to up network interface after boot, but after issuing ifconfig interface begins to work... svcs -xv says that service svc:/network/physical:default is failed to start and service log stores something like "service method... (5 Replies)
Salamo Alikom after recompilation my kernel does not boot and display msg said : enter full path to bash : /bin/sh i try fsck -r ,fsck -y but the problem is steel . my make.conf : PERL_VER=5.8.8 OVERRIDE_LINUX_BASE_PORT=f8 PERL_VERSION=5.8.8 MODULES_OVERRIDE = linux acpi accf_http pccard msdosfs... (1 Reply)
HPUX running in D-Class (L1000), pretty old HPUX version - hpux 11.00
Attempt 1 -- To boot from normal (primary)
Unable to boot - system complains failure
SYSTEM ALERT System Name : uninitialized DATE : 10/22/2011 Time : 03/41:12 Alert Level 15 = Fatal hardware or configuration... (12 Replies)
Hi guys,
I've been trying to set up a server for disk-less booting of remote machines on a network. The server host OS is RHEL6 and I have configured dhcp, tftp and nfs services which are proven to be working since I am able to install RHEL6 through pxe boot. Now I want it to serve for disk-less... (0 Replies)
Hi
im using centos 6.4
starting yesterday i have a strange issue that im unable to resolve. the system is booting to GRUB menu and the os is not starting. i tried to run a repair install and the message attached is what i get, what can cause this?
thanks, (1 Reply)
Either I try to boot from USB bootable drive or from a bootable dvdrom, I am receiving a message ERROR: boot-read fail
{0} ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this... (18 Replies)
04-16-2018
