Sponsored Content
Full Discussion: Oracle ASM on Solaris 11.3
Operating Systems Solaris Oracle ASM on Solaris 11.3 Post 303015739 by gull04 on Wednesday 11th of April 2018 08:25:14 AM
Old 04-11-2018
Oracle ASM on Solaris 11.3

Hi Folks,

I've just built a Solaris 11.3 server with a number of LDOM's, all good and well and not any serious issues so far.

On our older Solaris 10 systems we ran Oracle 11g using ASM disks, these disks were the raw device meta disks and came in very nicely as "/dev/md/rdsk/dnn" all worked very well and performed pretty well to boot.

I'm working with a fairly small database server where there were 10 ASM disks, this was almost 1Tb of space - so here is my question set.
  1. Is there an equivalent way of doing this using a zpool?
  2. Would I be better going zfs native for these disks, but how much of a performance hit would I take.
  3. Or should I just use the /dev/rdsk devices and absorb the admin load when it comes to database growth.

Just for some additional information, the Solaris server is connected to a VNX8300 via IBM SVC.

Regards

Gull04
 

9 More Discussions You Might Find Interesting

1. Solaris

asm vs disksuite for oracle

I'm running solaris, with solstice disksuite. With other systems, i run veritas volume manager. My dba want to implement ASM with oracle 10g. Is it possible to create volumes with disksuite for ASM. Oracle want a volume name ex: vol1 My question is, what is the best STANDARD solution. ... (5 Replies)
Discussion started by: simquest
5 Replies

2. Red Hat

ORACLE RAC ASM disk question

Perhaps someone here has some experience with this. machine os RHE 4 6 oracle 10g RAC disk is SAN attached clariion. I have presented new disks to the host, so the machine sees all needed LUNS. powermt shows them, they are labeled and i have fdisk'd them. They are visible across all RAC... (5 Replies)
Discussion started by: Eronysis
5 Replies

3. Solaris

Command to format Oracle ASM raw disk

Hi, Can any one please provide the command to format an Oracle Raw Disk in Solaris 10. I have been used the following commands: dd if=/dev/zero of=<raw disk path> Thanks ---------- Post updated at 12:20 PM ---------- Previous update was at 10:11 AM ---------- Well this didn't give... (0 Replies)
Discussion started by: Mack1982
0 Replies

4. AIX

Oracle ASM accidentally messed with my hdisk

I have AIX 5.3 with oracle 10g ( test server). While trying to create RAW disk for Oracle ASM I have accidentally messed with rootvg (hdisk0 & hdisk1) When I do # lspv hdisk0 0516-066 : Physical volume is not a volume group member. Check the physical volume name specified. ... (4 Replies)
Discussion started by: George_Samaan
4 Replies

5. Programming

Help on a perl script to connect to oracle ASM as sysdba

I am novice to perl. Can someone guide me on the below query. We have an existing perl script which connects to database to check the disk group status which i wanted to retieve directly from ASM rather than database. This is because, a cluster has more than 4 databases running and a check on... (0 Replies)
Discussion started by: sai_rsk
0 Replies

6. Shell Programming and Scripting

Use perl to connect to Oracle ASM as sysdba

I am novice to perl. Can someone guide me on the below query. We have an existing perl script which connects to database to check the disk group status which i wanted to retieve directly from ASM rather than database. This is because, a cluster has more than 4 databases running and a check on... (1 Reply)
Discussion started by: sai_rsk
1 Replies

7. Solaris

Can we add Oracle ASM in sun cluster3.3 or 4.0 in failover mode

Hi I am new to this forum & oracle DBA also, I would like to know that can we add Oracle ASM in failover mode in sun cluster 3.3 or 4.0 means that if suppose oracle is running along with ASM on node1 & this node went down due to hardware issue then both oracle along with ASM must move to... (1 Reply)
Discussion started by: hb00
1 Replies

8. UNIX for Advanced & Expert Users

Script to automate add/resize datafile in Oracle ASM Storage

Hi all, Could anyone please share ideas or logic on how to automate add/resize datafile in Oracle ASM Storage for Oracle RAC/Single Node databases when any tablespace space alert is trigerred by OEM? Thanks for your help and time on it! Thanks&regards, a1_win Please DON'T use CODE tags... (0 Replies)
Discussion started by: a1_win
0 Replies

9. Solaris

Missing ASM Disks in Solaris 11.3 LDOM

Hi Guys, Just a quick question hopefully someone will have seen this before and will be able to enlighten me. I have been doing some Infrastructure Verification Testing and one of the tests was booting the primary domain from alternate disks, this all went well - however on restarting one of... (7 Replies)
Discussion started by: gull04
7 Replies
disks(1M)						  System Administration Commands						 disks(1M)

NAME
disks - creates /dev entries for hard disks attached to the system SYNOPSIS
/usr/sbin/disks [-C] [-r rootdir] DESCRIPTION
devfsadm(1M) is now the preferred command for /dev and should be used instead of disks. disks creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices directory tree. It performs the following steps: 1. disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name. 2. The /dev/dsk and /dev/rdsk directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this program to designate a particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the target number for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only) 3. If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks creates the missing symbolic links. If none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries exist for other disks attached to the same controller, and if so, creates new entries using the same controller number as used for other disks on the same controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con- troller as the current disk, disks assigns the lowest-unused controller number and creates entries for the disk slices using this newly-assigned controller number. disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually, first run drvconfig(1M) to ensure /devices is consistent with the current device configuration. Notice to Driver Writers disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to be disk devices. disks(1M) requires the minor name of disk devices obey the following format conventions. The minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter- faces consists of a single lowercase ASCII character, a through u, followed by ,raw. disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8 slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire disk, while r, s, t, and u represent up to 4 additional partitions. To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F). OPTIONS
The following options are supported: -C Causes disks to remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible. -r rootdir Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found under rootdir, not directly under /. ERRORS
If disks finds entries of a particular logical controller linked to different physical controllers, it prints an error message and exits without making any changes to the /dev directory, since it cannot determine which of the two alternative logical-to-physical mappings is correct. The links should be manually corrected or removed before another reconfiguration-boot is performed. EXAMPLES
Example 1: Creating Block and Character Minor Devices The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function. #include <sys/dkio.h> /* * Create the minor number by combining the instance number * with the slice number. */ #define MINOR_NUM(i, s) ((i) << 4 | (s)) int xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance, slice; char name[8]; /* other stuff in attach... */ instance = ddi_get_instance(dip); for (slice = 0; slice < V_NUMPAR; slice++) { /* * create block device interface */ sprintf(name, "%c", slice + 'a'); ddi_create_minor_node(dip, name, S_IFBLK, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); /* * create the raw (character) device interface */ sprintf(name,"%c,raw", slice + 'a'); ddi_create_minor_node(dip, name, S_IFCHR, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); } } Installing the xkdisk disk driver on a Sun Fire 4800, with the driver controlling a SCSI disk (target 3 attached to an isp(7D) SCSI HBA) and performing a reconfiguration-boot (causing disks to be run) creates the following special files in /devices. # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/ brw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a crw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw brw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b crw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw brw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c crw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw brw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d crw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw brw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e crw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw brw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f crw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw brw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g crw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw brw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h crw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw /dev/dsk will contain the disk entries to the block device nodes in /devices # ls -l /dev/dsk /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h and /dev/rdsk will contain the disk entries for the character device nodes in /devices # ls -l /dev/rdsk /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw FILES
/dev/dsk/* Disk entries (block device interface) /dev/rdsk/* Disk entries (character device interface) /devices/* Device special files (minor device nodes) ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F) Writing Device Drivers BUGS
disks silently ignores malformed minor device names. SunOS 5.10 7 Nov 2002 disks(1M)
All times are GMT -4. The time now is 02:26 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy