T4-2 - Memory DIMM issue - ldom config resets to factory-default Post: 303015484

Sponsored Content

Operating Systems Solaris T4-2 - Memory DIMM issue - ldom config resets to factory-default Post 303015484 by Peasant on Thursday 5th of April 2018 11:41:23 AM

04-05-2018

Moderator

It is unlikely for faulty dimm to effect SP in any way.

Configuration is saved there by issuing ldm add-spconfig <unique_name>

So, after you configure the system as per your desires or change the existing configuration, you run above command to save the work done to SP.

No need to reboot anything, but since work is saved, upon next reboot the configuration saved will be applied from SP (the latest saved).

Did you save the config followed by reboot ?
I always save, since if not saved the list option says "next poweron", probably meaning complete power cycle (not init 6 or reboot).

You should inspect, as Jim mentioned, fmadm faulty.
A properly configured system will report memory errors using that facility.

Regards
Peasant.

This User Gave Thanks to Peasant For This Post:

Peasant

View Public Profile for Peasant

Find all posts by Peasant

5 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

memory config - need to get it

Hi, Im in need to get the mem config on a sun sparq Can some one please helpe me? (im not a unixperson)

2. HP-UX

Memory dimm status

Hi, How to check the memory dimm status from OS leavel!! My system model HP N4000. Thanks, ARumugam.

3. Solaris

Understanding memory config with prtdiag -v

Hi. I have 2 SunFire V490 servers running Solaris 10. We may have to upgrade with more memory on one of them to make it compatible with the other. Here's the one with 12GB of RAM: Memory size: 12288 Megabytes ========================= CPUs =============================================== ...

4. Solaris

Network Config on Zone in a Guest LDOM

Solaris for Sparc 11.1 with the latest patches. Created a Guest LDOM with two vnet's net0 and net1, installed a guest whole root, ip exclusive zone that I want to be able to utilize DHCP. I have been able to create the zone but unable to get it to boot because I am unable to assign an anet to it....

5. Solaris

T4 replaced motherboard - recovering LDOM config?

T4-2 issues meant replacing motherboard. I thought the ldom config was automatically saved? Got the oracle document here. At the moment, unable to get ldoms back - here is the output from a few commands:- ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME...

LEARN ABOUT OSF1

reboot

reboot(8)						      System Manager's Manual							 reboot(8)

NAME

       reboot - Restarts the machine

SYNOPSIS

       /usr/sbin/reboot [-dlnq]

DESCRIPTION

       When  the  system  is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation.  If no users are
       logged in, use the reboot command.

       The reboot command normally stops all running processes, syncs the disks, logs the reboot,  and	writes	a  shutdown  entry  in	the  login
       accounting file, /var/adm/wtmp.

       The  reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
       ware time-of-day clock.	After these activities, the system reboots.  By default, the system starts and the file systems are  automatically
       checked.  If the start-up activities are successful, the system comes up in the default run-level.

       You must have root privileges to use this command.  Using the -n flag can result in file system damage.

FLAGS

       Generates  a  crash  dump  of the system before halting it.  Can be used with any of the other flags.  Does not log the reboot using syslog
       Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not  log
       the reboot using syslog

EXAMPLES

       To  enable  the	default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
       shutdown, and perform other routine shutdown and reboot activities.  To shut down the system without logging the reboot, enter:	reboot	-l
       This  command  shuts  down  the	system and performs all shutdown and reboot activities, except logging the shutdown.  To reboot the system
       abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.

FILES

       Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon

RELATED INFORMATION

       Commands:  fsck(8), halt(8), init(8), savecore(8) shutdown(8), syslogd(8)

       Functions:  reboot(2), sync(2), syslog(3) delim off

																	 reboot(8)