03-15-2018
Quote:
Originally Posted by
techedipro
RudiC & apmcd47,
Initailly I did not tested the command with -d flag . I realized it only after running it on AIX machine that -d is not an option.
-d flag will not work.
Any other work around ?
Thanks for your time and patience on this!
Yes. Look at post #5 and post #2 in this thread!
Of course, whether or not that will work in the directories in which you want to run this code will depend on what other files are already there. (But, of course that is information you haven't bothered to tell us. Just like you didn't bother to tell us you were using AIX. And you haven't bothered to tell us what shell you're using. And complaining about getting suggestions using
split -d after you said you were successfully using it in post #1 in this thread is really disconcerting.
If you don't tell us what other files are present in a directory where you want us to use commands that create a lot of filenames, there is a good chance we'll make suggestions that destroy some of your other files. If you don't tell us what shell you're using (including the version number of that shell), there is a good chance we'll make suggestions using the shell(s) we like to use even though the rest of your script may not support our suggestions. Please get into the habit of clearly specifying the environment you're working in or be prepared to translate the suggestions we make so that they will work in your environment. Leaving out information about your environment just wastes your time and ours.)
This User Gave Thanks to Don Cragun For This Post:
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have gone through all the threads in the forum and tested out different things. I am trying to split a 3GB file into multiple files. Some files are even larger than this.
For example:
split -l 3000000 filename.txt
This is very slow and it splits the file with 3 million records in each... (10 Replies)
Discussion started by: madhunk
10 Replies
2. Shell Programming and Scripting
Hi All,
I have a requirement .I want to split a file and the split files should have certain names.
Currently when i use the split command
split -1000 testdata testdata_
Then the output is
testdata_aa
testdata_bb
testdata_cc
and so on.
But i want the output as
testdata1.snd... (3 Replies)
Discussion started by: dnat
3 Replies
3. Shell Programming and Scripting
I have a file test1.html like below:
<dctm_topnav_en_US>
<html>
.....
</html>
<dctm_topnav_en_CA>
<html>
.....
</html>
<dctm_topnav_en_FR>
<html>
.....
</html>
I need to use awk to split this into three file names like en_US.html ,
en_CA.html, en_FR.html each having content between... (4 Replies)
Discussion started by: vijay52
4 Replies
4. UNIX for Dummies Questions & Answers
Hi everyone,
I am trying to write an if statement that will split a file if it is over 1 million records/lines into files with say 900,000 records and then rename
those files without the aaa, aab, aac format that splitting normally does and into a specific naming convention. For instance, if... (2 Replies)
Discussion started by: coach5779
2 Replies
5. UNIX for Dummies Questions & Answers
I have a file named Me_thread_spell.txt that I want to split into smaller files. I want it to be split in each place there is a ;;;. For example,
blah blah blah ;;;
blah bhlah hlabl
awasnceuir
asenduhfoijhacseiodnbfxasd;;;
oabwcuhaweoir;;;
This full file would be three separate files... (7 Replies)
Discussion started by: mschpers
7 Replies
6. Shell Programming and Scripting
Hello;
I have a file consists of 4 columns separated by tab. The problem is the third fields. Some of the them are very long but can be split by the vertical bar "|". Also some of them do not contain the string "UniProt", but I could ignore it at this moment, and sort the file afterwards. Here is... (5 Replies)
Discussion started by: yifangt
5 Replies
7. UNIX for Dummies Questions & Answers
Hi,
I have a data file like below
messageid|email|timestamp
750452173|123@googlemail.com|2013-05-24 16:14:32
750464921|000@gmail.com|2013-06-13 19:38:01
750385426|001@googlemail.com|2013-01-06 12:06:36
750373470|000@wz.eu|2012-11-30 22:32:07
.
.
I want to split the files based on the... (4 Replies)
Discussion started by: armsaran
4 Replies
8. Shell Programming and Scripting
Hello,
Need to split files into n number of files and rename the files
Example:
Input:
transaction.txt.1aa
transaction.txt.1ab
......
Output:
transaction.txt.1
transaction.txt.2
transaction.txt.3 (3 Replies)
Discussion started by: krux_rap
3 Replies
9. Shell Programming and Scripting
Hello,
I'm using Windows 7 ; sed, awk and gnuwin32 are installed.
I have a big text file I need to manipulate.
In short, I will have to split it in thousands of short files, then rename and save in a folder which name is based upon filename.
Here is a snippet of my big input.txt file (this... (4 Replies)
Discussion started by: sellig
4 Replies
10. UNIX for Beginners Questions & Answers
i use the split command to split a one terabyte backup file into 10 chunks of 100 GB each. The files are split one after the other. While the files is being split, I will like to scp the files one after the other as soon as the previous one completes, from server A to Server B. Then on server B ,... (2 Replies)
Discussion started by: malaika
2 Replies
LEARN ABOUT X11R4
perlos400
PERLOS400(1) Perl Programmers Reference Guide PERLOS400(1)
NAME
README.os400 - Perl version 5 on OS/400
DESCRIPTION
This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is com-
piled and/or runs.
By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see
http://www.iseries.ibm.com/developer/factory/pase/index.html This environment allows one to use AIX APIs while programming, and it provides
a runtime that allows AIX binaries to execute directly on the PowerPC iSeries.
Compiling Perl for OS/400 PASE
The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX.
The trick is to give a special parameter to the Configure shell script when running it on AIX:
sh Configure -DPASE ...
The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter -Dpre-
fix=/some/dir.
Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The
easier way, however, is to compile in AIX, as just described.
If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure
parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the
installed files still think they are (will be) in /QOpenSys/perl.
If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive
filesystem.
Installing Perl in OS/400 PASE
If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory.
Transfer the tarball to the OS/400 using FTP with the following commands:
> binary
> site namefmt 1
> put perl.tar /QOpenSys
Once you have it on, simply bring up a PASE shell and extract the tarball.
If you are compiling in PASE, then "make install" is the only thing you will need to do.
The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have
to modify your path.
Using Perl in OS/400 PASE
Perl in PASE may be used in the same manner as you would use Perl on AIX.
Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if
you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to
have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work.
Known Problems
When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level
of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0".
If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not imple-
mented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If you
can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(),
which isn't implement in V5R1, simply change the line that says:
d_fchdir='define'
to
d_fchdir='undef'
and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available.
Perl on ILE
There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998).
(As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE,
though, you may need this older port: http://www.cpan.org/ports/#os400 Note that any Perl release later than 5.00502 has not been ported to
ILE.
If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl.
AUTHORS
Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com>
perl v5.8.9 2007-11-17 PERLOS400(1)