#!/bin/bash -x
sftp -P 22 -oIdentityFile=~/.ssh/id_rsa/sftp -v username@192.168.17.181<<EOF
cd ../../
put ftpusers/TransferFolder/ftp/data/*
echo "File transfer has been completed"
bye
EOF
Using the same sftp line from my script connects to the server because debug shows the key verification process and says connected.
Basically, I need a script that will send any file with the .csv extension that is in the data folder, to the server each day at just after 5.
I also have another script which you can see referenced in the cronjob which is to create a log file with the date of transfer and file name sent, here that is:
Code:
#!/bin/bash
while read x; do
echo -n `date +%d/%m/%Y\ %H:%M:%S`;
echo -n " ";
echo $x;
done
The path ftpusers/TransferFolder/ftp/data/ is 2 folder levels below my users home path, e.g ~/. So I need to ../../ to then go to my ftpusers/TransferFolder/ftp/data/ ,path. will this affect the process?
Again, thank you for your time and answers
Moderator's Comments:
Thanks for trying, but: Please use CODE (not ICODE) tags as required by forum rules!
Last edited by RudiC; 02-20-2018 at 07:09 AM..
Reason: Changed ICODE to CODE tags.
I have tried winscp, filezilla to copy data from windows xp SP2 machine to the sun sparc unix machine. However speed is around 120 to 130 kb/sec. I do have lot of files & with large size.
So I switched to windows command prompt & transfered few files using sftp command. Its very fast as compared... (0 Replies)
Hi,
we have a big problem,
history:
we migrated our companies ftp and sftp-server, which were vsftp and openssh, to one server, software is called JSCAPE ftp server professional edition
for the first time everything was great, but after one or two months, our uploads hang, 0 byte files are... (11 Replies)
Hi all,
I have no root access enabled on our linux server due to safety issues. We use sudo. When I change my password using passwd command, I sometimes get issues where I can't log back in.
Pam_Tally disables due to trying my password too many times. So someone in my group has to reset... (7 Replies)
hi
i need to transfer some files from windows server to unix server using SFTP. but before transferring the files, i need to check the
existence of a particular file in the remote directory (say r_dir1). if the file is present, then SFTP all the files.
after SFTPing the files from the remote... (1 Reply)
I am having two csv files i need to compare these files and the output file should have the information of the differences at the field level.
For Example,
File 1:
A,B,C,D,E,F
1,2,3,4,5,6
File 2:
A,C,B,D,E,F
1,2,4,5,5,6
out put file: (12 Replies)
Hi,
I am trying to automate the process of fetching files from remote server to local server through sftp. I have the username and password for the remote solaris server. But I need to give password manually everytime i run the script.
Can anyone help me in automating the script such that it... (3 Replies)
Hi,
I am looking for a shell script to sftp to a file server and copy all the files from a directory after the script is run.
The server name should be a user input parameter and of-course the username/password as well. Rest all should be handled by the script.
I tried with below snippet:-
... (1 Reply)
hi there !
how SSH into my Ubuntu server to Build or Send an Email?
is it true to use iRedMail? (1 Reply)
Discussion started by: fns4565
1 Replies
LEARN ABOUT CENTOS
anacrontab
ANACRONTAB(5) File Formats ANACRONTAB(5)NAME
/etc/anacrontab - configuration file for Anacron
DESCRIPTION
The /etc/anacrontab configuration file describes the jobs controlled by anacron(8). It can contain three types of lines: job-description
lines, environment assignments, or empty lines.
Job-description lines can have the following format:
period in days delay in minutes job-identifier command
The period in days variable specifies the frequency of execution of a job in days. This variable can be represented by an integer or a
macro (@daily, @weekly, @monthly), where @daily denotes the same value as the integer 1, @weekly the same as 7, and @monthly specifies that
the job is run once a month, independent on the length of the month.
The delay in minutes variable specifies the number of minutes anacron waits, if necessary, before executing a job. This variable is repre-
sented by an integer where 0 means no delay.
The job-identifier variable specifies a unique name of a job which is used in the log files.
The command variable specifies the command to execute. The command can either be a command such as ls /proc >> /tmp/proc or a command to
execute a custom script.
Environment assignment lines can have the following format:
VAR=VALUE
Any spaces around VAR are removed. No spaces around VALUE are allowed (unless you want them to be part of the value). The specified
assignment takes effect from the next line until the end of the file, or to the next assignment of the same variable.
The START_HOURS_RANGE variable defines an interval (in hours) when scheduled jobs can be run. In case this time interval is missed, for
example, due to a power down, then scheduled jobs are not executed that day.
The RANDOM_DELAY variable denotes the maximum number of minutes that will be added to the delay in minutes variable which is specified for
each job. A RANDOM_DELAY set to 12 would therefore add, randomly, between 0 and 12 minutes to the delay in minutes for each job in that
particular anacrontab. When set to 0, no random delay is added.
Empty lines are either blank lines, line containing white spaces only, or lines with white spaces followed by a '#' followed by an arbi-
trary comment.
You can continue a line onto the next line by adding a '' at the end of it.
In case you want to disable Anacron, add the 0anacron cron job (which is a part of crontab(1)) into the /etc/cron.hourly/jobs.deny direc-
tory.
EXAMPLE
This example shows how to set up an Anacron job similar in functionality to /etc/crontab which starts all regular jobs between 6:00 and
8:00 only. A RANDOM_DELAY which can be 30 minutes at the most is specified. Jobs will run serialized in a queue where each job is started
only after the previous one is finished.
# environment variables
SHELL=/bin/sh
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
RANDOM_DELAY=30
# Anacron jobs will start between 6am and 8am.
START_HOURS_RANGE=6-8
# delay will be 5 minutes + RANDOM_DELAY for cron.daily
1 5 cron.daily nice run-parts /etc/cron.daily
7 0 cron.weekly nice run-parts /etc/cron.weekly
@monthly 0 cron.monthly nice run-parts /etc/cron.monthly
SEE ALSO anacron(8), crontab(1)
The Anacron README file.
AUTHOR
Itai Tzur <itzur@actcom.co.il>
Currently maintained by Pascal Hakim <pasc@(debian.org|redellipse.net)>.
For Fedora, maintained by Marcela Malaova <mmaslano@redhat.com>.
cronie 2012-11-22 ANACRONTAB(5)
02-20-2018
My full script
