I have a file --> file1.txt
i need to copy this file to another server using FTP....the 2 servers are server1 and server2..may i know how to write a script that can do this?
thanks in advance! Im a newbie to this... (4 Replies)
I just moved a dedicated server, which included moving to a new subnet, and new IP address. Now my server is not reconnecting - I've tried ifconfig, altering the etc/hosts file with the new ip address, with no luck. (5 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hi All,
I am new for this blog and this is my first Query on this blog. I would like to dael with graet masters on linux.
Here we go,
After storage people created the LUN, How to add that LUN to Linux server. (Make that LUN visibility on linux server.) ?
How to view the LUN... (5 Replies)
Hi,
I have compiled FreeTDS on AIX 5.3. Its my dev environment so I have c compilers on the box so I was able to compile. From the test environment onwards I will not be able to have c compilers. I tried to move these files directly to the test environment with the same directory structure but I... (2 Replies)
Hi,
I am trying to setup multipathing (using DM multipath) for a redhat cluster setup ...all setup is done but issue is :
node 1 shows the shared iscsi lun as sdc
node 2 shows the same as sdg (changes on reboots)
Due to this (i guess) i get i/o error & i can not read files created by... (0 Replies)
I have created a lun on Storage and connected it to server using fiber channel.
LUN is presented on new Server .
How do i check and mount this newly created LUN? (1 Reply)
Discussion started by: pinga123
1 Replies
9. Post Here to Contact Site Administrators and Moderators
BOOT.CONFIG(5) BSD File Formats Manual BOOT.CONFIG(5)NAME
boot.config -- Configuration file for the boot blocks
DESCRIPTION
The boot.config file contains options for the FreeBSD boot block code.
When the FreeBSD boot loader runs, it searches the ``a'' slice of the boot partition for a boot.config file (as a result, slices which are
missing an ``a'' partition require user intervention during the boot process). If the boot.config file is found, its contents are used as
the default configuration options for the boot block code and are echoed to the system console.
A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other
valid boot(8) option on a single line, as it is done at the ``boot:'' prompt.
The options related to the boot image selection described below and all the other options available for boot.config are documented in detail
in the boot(8) manual page.
FILES
/boot.config parameters for the boot blocks (optional)
EXAMPLES
The command:
# echo "-P" > /boot.config
will activate the serial console of FreeBSD.
The command:
# echo "1:ad(1,a)/boot/loader" > /boot.config
will instruct the second stage of boot(8) on the first disk to boot with the third boot(8) stage from the second disk.
The command:
# echo "1:ad(1,a)/boot/loader -P" > /boot.config
will do both of the above.
SEE ALSO boot(8), loader(8)AUTHORS
This manual page was written by Daniel Gerzo <danger@FreeBSD.org>.
BSD May 13, 2007 BSD