02-12-2018
This disk c0t1d0 is experiencing read errors.
Currently it is only evident on slice 5 to the SVM.
iostat is showing errors for entire device.
Have a replacement disk ready.
Detach all slices from metadevices involving failed disk (c0t1d0..)
You will need to identify the disk physically and unconfigure it using cfgadm
The blue led should indicate the disk is safe to remove.
Replace of faulty disk in the server.
After the new working disk is inserted and visible to the operating system, proceed and follow the docs regarding svm replace faulty disk (or root disk) and its slices.
You might also want to considering making backup asap.
This is no easy task, and should be performed with care.
Verify each step taken and follow the documentation for the exact version of SVM and operating system you are using.
Hope that helps.
Regards
Peasant.
This User Gave Thanks to Peasant For This Post:
9 More Discussions You Might Find Interesting
1. HP-UX
What exactly happens when you boot HP-UX with the -lm flag?
We tried this the other night, with some wacky results...
We poked around, and found that / was mounted to /dev/rroot (I think... maybe it was just /dev/root). So, (still playing) we activated the volume group (lvchange -ay), and... (2 Replies)
Discussion started by: LivinFree
2 Replies
2. Post Here to Contact Site Administrators and Moderators
I'm trying to disable the email notifications; despite going into my control panel and selecting NO next to Use 'Email Notification' by default? I keep getting email notifications anyway! And I know I've never selected the checkbox next to Email Notification: emails sent to you whenever someone... (2 Replies)
Discussion started by: oombera
2 Replies
3. UNIX for Dummies Questions & Answers
I want give rights for the maint user to execute the "ping" command. Currently root user can execute the "ping" command, but the maint user is not able to execute the command. (3 Replies)
Discussion started by: kabeer_n
3 Replies
4. Post Here to Contact Site Administrators and Moderators
Hi.
On 09-05-2007 Neo posted that new servers were on their way.
1) It would be nice to hear of occasional progress. As far as I can tell, there has not been much of a change. The notice that is posted every now and then talks about a new server "this week". (In fact as I was previewing... (1 Reply)
Discussion started by: drl
1 Replies
5. Solaris
Hi,
I've recently mirrored the 4 disks in a V440. Disks 0 + 1 have been mirrored with hardware mirroring using the command raidctl -c c1t0d0 c1t2d0, the other 2 disks have been mirrored using Soltisce Disk Suite. I know how to check the progress for the SDS mirroring but how can I find the... (2 Replies)
Discussion started by: Chains
2 Replies
6. Solaris
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
Discussion started by: nickychung
10 Replies
7. Emergency UNIX and Linux Support
Hi All
I have a RAID 5 array consisting of 4 drives that had a partial drive failure in one of the drives.
Rebooting shows the faulty drive as background rebuilding and mdadm /dev/ARRAYID shows three drives as in sync with the fourth drive as spare rebuilding.
However the array won't come... (9 Replies)
Discussion started by: Bashingaway
9 Replies
8. Solaris
I have a Solaris 10 server that notified one of my users/database administrators of another users account expiring within X amount of days. It attempted to email the user@ server.com, which failed and was forwarded from the mailer-daemon@ server.com, to the DBA. She's not listed as an alias for... (2 Replies)
Discussion started by: Nvizn
2 Replies
9. Infrastructure Monitoring
Issue: I'm not receiving notifications
I can succesfully receive an e-mail if I do this on the command line:
/usr/bin/mail -s "NAGIOS HOST ALERT on $HOSTNAME$" rgouette@butlerbros.com
but, my command.cfg configuration below, refuses to send an e-mail when I set a service to a critical... (3 Replies)
Discussion started by: rgouette
3 Replies
LEARN ABOUT OSF1
volrootmir
volrootmir(8) System Manager's Manual volrootmir(8)
NAME
volrootmir - Mirror areas necessary for booting to a new disk
SYNOPSIS
/usr/sbin/volrootmir [-a] [nconfig=count] target_disk [swap=target_partition]
OPTIONS
Specifies that all volumes on the system disk be mirrored, not just the root and swap volumes, rootvol and swapvol.
DESCRIPTION
The volrootmir script causes a mirror copy of areas of the root disk involved in booting to be made on the specified target disk.
When used without the -a option, volrootmir adds mirrors of the root and swap volumes and allocates them on the new disk. In addition, all
disk regions required for booting are set up and partitions for the new volume mirrors are created.
When used with the -a option, volrootmir mirrors all in-use partitions on the system disk.
To mirror a swap volume that is on a separate disk from the root volume, the swap attribute must be used to specify a separate target for
the swap mirror.
The target disk(s) must be at least as large as the sum of the sizes of rootvol and swapvol. Also, the physical disk should not have any
disk partition in use.
This script can be called from the voldiskadm menus by choosing the Mirror volumes on a disk operation.
ATTRIBUTES
Specifies the number of log copies and copies of the configuration database, for example, nconfig=2. Specifies that the swap volume,
swapvol, be mirrored on a separate disk, as specified by target_partition.
EXAMPLES
The following command mirrors the rootvol and swapvol volumes onto the target disk, dsk3. This command will fail if swapvol is on a differ-
ent disk from rootvol.
# volrootmir dsk3 The following command mirrors rootvol, swapvol, and any other volumes on the root disk onto the target disk, dsk3.
This command will fail if swapvol is on a different disk from rootvol.
# volrootmir -a dsk3 The following command mirrors rootvol on disk dsk3, swapvol onto partition dsk7d, and any other volumes on the
root disk onto disk dsk3. This command will fail if swapvol is on the same disk as rootvol.
# volrootmir -a dsk3 swap=dsk7d The following command mirrors rootvol onto disk dsk3 and swapvol onto partition dsk7d. This command
will fail if swapvol is on the same disk as rootvol.
# volrootmir dsk3 swap=dsk7d
SEE ALSO
volintro(8), voldiskadm(8)
volrootmir(8)