I've been doing Linux and AIX administration for years, but I'm very new to HPUX. We have an old audit process which involves someone manually using sam to generate user lists. I'd like to kill that old process with fire...
But...
After working a bit in the morning to try and pull that same list from the command line I am coming up empty. I could, I suppose, pull each user from the file one by on in a loop and run queries about them but that is ugly.
I tried listing the SAM commands to a file and using them to the list but that also did nothing.
How do I get this list, at the command line..
Code:
xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx
xUsers 0 of 186 selectedx
xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx
x Login User ID x
x Name Activated (UID) Real Name x
xlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
xx user1 yes 1103 User Name1 ^ x
xx user2 yes 1155 username2 x
xx user3 yes 1008 username3r x x
Again, I'm sure to some of you this is a total newbie question and I have tried RTFM but I thought maybe you could help me out..
Thank you
Moderator's Comments:
Please use CODE tags as required by forum rules!
Last edited by RudiC; 01-26-2018 at 02:58 PM..
Reason: Added CODE tags.
Is there an easy way to view all printers on a local
machine via command line or a script?
I'm looking for the equivalent of clicking on
"START, CONTROL PANEL, PRINTERS AND FAXES"
to view the devices.
I then want to cat it to a file where I would use
it later.
Thanks (3 Replies)
Hey, new here, so be nice! I'm trying to write a little script to automate the user creation process on one of our boxes. But I would like to be able to use the templates that we have set up in SAM. Is the information in these templates stored in a file somewhere, that I can reference in my... (5 Replies)
How can I add a user to a specific group without using SAM? I know I can user modprpw -G, but that will overwrite any groups the user is in with the ones I specify.
I need to assume that I do not know what groups the user is already in, so I can't put them in the modprpw command. I just need... (2 Replies)
Hi I hope this is easy and sorry if I am using the wrong HP terms.
I am looking for a way to glean the command line information from a process I run in SAM?
In AIX I can just select any options I want for particular process and hit F6 and the command line is shown on the screen for use in... (3 Replies)
Use and complete the template provided. The entire template must be completed. If you don't, your post may be deleted!
1. The problem statement, all variables and given/known data:
Write a command line that will display a sorted list of logged in users. Just display the username and no other... (5 Replies)
hi, i have an AIX6.1 machine and i modified a user's profile so that it creates history file for each ip address that connects with this user. the reason i did this is because more than 1 person connects with the same user so i want to keep track of command run by all of them. therefore, in the... (5 Replies)
Hi all,
How can i display the middle line of a file using a single line command? (6 Replies)
Discussion started by: Lakme Pemmaiah
6 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)
01-26-2018
Display SAM user list at the command line
