Sponsored Content
Operating Systems Solaris Solaris 10 boot problem - ERROR: Last Trap: Fast Data Access MMU Miss Post 303011365 by achenle on Wednesday 17th of January 2018 10:10:39 AM
Old 01-17-2018
Can you boot from a CD or DVD? If so, you might have a corrupt boot disk.

If you can't boot a CD or DVD, you likely have bad RAM somewhere. If you have a memory expansion "mezzanine", that's the most likely problem. You can try booting without it: Remove a Memory Mezzanine Assembly - Sun SPARC Enterprise T5140 and T5240 Servers Topic Set
This User Gave Thanks to achenle For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Solaris boot problem

I couldnt get my hands on my solaris 2.6 cd soo i used solaris 7 cd to boot to single user mode. I typed boot cdrom -s it bought me to my root prompt , but when i typed fsck.....nothing happened. It was as though it couldnt go ahead with fscking. it just bought up the prompt again,... (1 Reply)
Discussion started by: lealyz
1 Replies

2. Solaris

solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error. cannot find mis/krtld boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies

3. UNIX for Advanced & Expert Users

V480 w/ Solaris 9 boot problem

Our V480 w/ Solaris 9 would not boot properly. After recreating the LUNs on our StorEdge A1000, and then performing a reboot, the machine just keep cycling through the boot process. No error messages, it keeps trying to reboot over and over again. Any ideas? We managed to do a stop+a and... (6 Replies)
Discussion started by: xnightcrawl
6 Replies

4. Solaris

Boot Trap 3e

Dear all, Every time I boot my Ultra 60, after initializing the memory I always have to type boot at the ok> Rebooting with command boot Boot device: disk0 File and args : Trap 3e (0) ok I've tried to re-installed the machine but result is the same... What would be the problem? ... (4 Replies)
Discussion started by: frankoko
4 Replies

5. Solaris

solaris 8 hangs and data access error on reboot

Hi using solaris 5.8 on UltraSPARC-IIi 360MHz. I know it is an old hardware but similiar hardware is running fine. here is the issue, System booted : works okay for some time then display was hung so system was rebooted ..it gave data access error. again rebooted and it came up... (6 Replies)
Discussion started by: upengan78
6 Replies

6. Solaris

Fast Data Access MMU Miss

Hi All , I am unable to reinstall the OS on my Ultra Sparc 10. After the 1st CD is loaded when it goes for reboot its goes to ok prompt an its unable to boot. What could be reason for this behavior? while loading the OS its seems fine but unable to boot!! Then i tried changing the... (2 Replies)
Discussion started by: kumarmani
2 Replies

7. Solaris

Solaris boot problem

Hi All We have the Sun Solaris server ... Got a power cut suddenly .... Crash happened to the system almost You can access through Termnl .. But it seems he did not boot ... How to Make the process of the boot correctly without losing information Thanks for all (3 Replies)
Discussion started by: gogo888
3 Replies

8. Ubuntu

fast data access mmu miss

hello, before i have install solaris 9, is good. I would like to install Ubuntu 10.04 on a Sun Blade 150 blade. I create cdrom iso burning with a 10x was open I made a boot ok: boot cdrom I get the following error: fast data access mmu miss i do probe-ide all reset-all always ... (2 Replies)
Discussion started by: philo_71
2 Replies

9. Solaris

Unable to login Solaris 10 Sparc - Data Access Error

Hello everyone, This is the first time I am installing Solaris. I have SunBlade 1500 Wrkstn. I installed Solaris 10 Sparc. The installation went successfully but I don't get the login screen. I get the following error message: Boot device: disk:a File and agrs:- Data Access Error Ok ... (4 Replies)
Discussion started by: mfsaeed
4 Replies

10. Solaris

Problem boot Solaris

Hi I have a problem on a server, when he boot I have this type of message loop, do you know what it corresponds to ? ( requesting internet Adress for 0:3:ba:fa:33:91 ) Regards Sun Fire V240, No Keyboard Copyright 2007 Sun Microsystems, INC. All rights reserved. openboot 4.22.33,... (10 Replies)
Discussion started by: yoyo-tns
10 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 11:42 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy