Sponsored Content
Operating Systems Solaris Solaris can not boot because metadb lost Post 303008674 by dzung on Monday 4th of December 2017 09:35:30 PM
Old 12-04-2017
Solaris can not boot because metadb lost

how to recovery metadb?
Thanks!
 

10 More Discussions You Might Find Interesting

1. Solaris

solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error. cannot find mis/krtld boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies

2. Solaris

solaris with metadb

Hi All, If solaris has metadb services on the disk, it means that it has a HW raid controller. Or what. Thanks in advance. (1 Reply)
Discussion started by: itik
1 Replies

3. Solaris

metadb problem - server unable to boot

Hi everyone I have a problem. My configuration is as follows: Sun 280R server 2 x internal disks 3 x state databases on disk 1 3 x state databases on disk 2 Disk 1 was giving errors, so I cleared the mirrors on it, deleted the state databases and replaced the disk. Before attaching... (5 Replies)
Discussion started by: soliberus
5 Replies

4. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies

5. Solaris

How to create metadb with zpool in Solaris 11

Hi, my root pool is as follows. How can I create a metadb if I want to create SVM volumes? zpool status pool: rpool1 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool1 ONLINE 0 0 0 c4t1d0s0 ... (10 Replies)
Discussion started by: incredible
10 Replies

6. What is on Your Mind?

Lost Sun Solaris 10Certification

.............. (1 Reply)
Discussion started by: siddulamadhu
1 Replies

7. Solaris

Boot disk crash with metadb config info

Hello all; We have a SunFire V240 with three disks that were part of a metadb. One of those disks, the boot disk, experienced a horrible death Monday night and we're now trying to recover from that. I know very little about metadb stuff, so please be gentle with me... I'm assuming... (3 Replies)
Discussion started by: Handon
3 Replies

8. Solaris

Check Solaris VM Databases metadb does not have enough information about logical volumes

Check Solaris VM Databases metadb does not have enough information about logical volumes. Current value is 0% I have checked the SVM status, all disks are good state and synched perfectly. no errors in metadb -i. what is this alert exact mean? what we have to check for the value? Please... (1 Reply)
Discussion started by: Naveen.6025
1 Replies

9. Solaris

Solaris 10 Volume Manager - adding slice to metadb

Hi all, I added a new disk slice to the current metadb. Below is what I see bash-3.2# metadb -i flags first blk block count a m p luo 16 8192 /dev/dsk/c0t0d0s7 a p luo 8208 8192 ... (3 Replies)
Discussion started by: javanoob
3 Replies

10. Solaris

Solaris stuck during boot after reconfigure boot

Hello, I have a problem with my machine that won't boot properly. The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to... (18 Replies)
Discussion started by: Zorken
18 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 04:53 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy