Do you have some install media that you can use to bring up an OS just in memory?
Something like:-
If you can get that running, then you can try to look at the devices you have available. Alternately, you might try something like:-
It has been a long time since I had a Sun Sparc to work with, so things may well have changed. You can get some basic help at the ok> prompt. This looks like a hardware issue, or perhaps it is trying to pick up SAN provided disk that has been de-configured.
Can you tell us a bit more about what you have and why you don't have a password for root. Some people choose to have is randomly set regularly, but you should include a secure place to store it should the need (like this) arise. We might be able to get you in if you have console access, install media and the correct disks available.
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)
I have a machine running HP-UX 11.23 (PARISC) and APA startup fails on boot. This is found in /etc/rc.log:
Configure Auto-Port Aggregation(LAN Monitor) interfaces
Output from "/sbin/rc2.d/S343hplm start":
----------------------------
get_start_dlpi_version: failed, errno is 22
ERROR: ... (1 Reply)
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Hi,
I am trying to setup a server for a diskless boot of a computer class (with ubuntu)
I followed the guidelines in https://help.ubuntu.com/community/DisklessUbuntuHowto
I have two computers: one is the server I installed and the other is my macbook on which I run a virtual machine... (8 Replies)
Good evening all,I'm new to your site, so please bear any infringements or transgressions on my part.I'm new to the whole Solaris boot install over the net scenario, but here's where I'm stuck:I have an M5000 with 2 domains (running unimode). Domain 0 is configured and running Solaris 10. Domain 1... (9 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
I have a T2000 enterprise SPARC server that's no longer on contract with Oracle. It's on old firmware (6.3.x). After a power-down this weekend, it won't boot normally. Boot snapshot at the bottom of the post.
It can boot to cdrom, and it'll boot to failsafe mode, but it won't do a regular... (9 Replies)
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
My OS solarius 5.10 Generic_147148-2 i86
Error: please review new boots environments using options
1. Solution - show me the commands
Partition is full, try to remove some unneeded files,
then try to compress some other unneeded files.
man command creates a temp file under... (0 Replies)
My system suddenly crash and when it rebooted there was an error:
/dev/rdsk/c1t0d0s3 is logging
svc.startd: svc:/network/nis/client:default: Method "/method/yp" failed with status 96.
The system completes booting however when I log in a user account / directory is not longer... (1 Reply)
Discussion started by: NeedSolarisHelp
1 Replies
LEARN ABOUT OSX
locale::codes::langfam
Locale::Codes::LangFam(3pm) Perl Programmers Reference Guide Locale::Codes::LangFam(3pm)NAME
Locale::Codes::LangFam - standard codes for language extension identification
SYNOPSIS
use Locale::Codes::LangFam;
$lext = code2langfam('apa'); # $lext gets 'Apache languages'
$code = langfam2code('Apache languages'); # $code gets 'apa'
@codes = all_langfam_codes();
@names = all_langfam_names();
DESCRIPTION
The "Locale::Codes::LangFam" module provides access to standard codes used for identifying language families, such as those as defined in
ISO 639-5.
Most of the routines take an optional additional argument which specifies the code set to use. If not specified, the default ISO 639-5
language family codes will be used.
SUPPORTED CODE SETS
There are several different code sets you can use for identifying language families. A code set may be specified using either a name, or a
constant that is automatically exported by this module.
For example, the two are equivalent:
$lext = code2langfam('apa','alpha');
$lext = code2langfam('apa',LOCALE_LANGFAM_ALPHA);
The codesets currently supported are:
alpha
This is the set of three-letter (lowercase) codes from ISO 639-5 such as 'apa' for Apache languages.
This is the default code set.
ROUTINES
code2langfam ( CODE [,CODESET] )
langfam2code ( NAME [,CODESET] )
langfam_code2code ( CODE ,CODESET ,CODESET2 )
all_langfam_codes ( [CODESET] )
all_langfam_names ( [CODESET] )
Locale::Codes::LangFam::rename_langfam ( CODE ,NEW_NAME [,CODESET] )
Locale::Codes::LangFam::add_langfam ( CODE ,NAME [,CODESET] )
Locale::Codes::LangFam::delete_langfam ( CODE [,CODESET] )
Locale::Codes::LangFam::add_langfam_alias ( NAME ,NEW_NAME )
Locale::Codes::LangFam::delete_langfam_alias ( NAME )
Locale::Codes::LangFam::rename_langfam_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangFam::add_langfam_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangFam::delete_langfam_code_alias ( CODE [,CODESET] )
These routines are all documented in the Locale::Codes::API man page.
SEE ALSO
Locale::Codes
The Locale-Codes distribution.
Locale::Codes::API
The list of functions supported by this module.
http://www.loc.gov/standards/iso639-5/id.php
ISO 639-5 .
AUTHOR
See Locale::Codes for full author history.
Currently maintained by Sullivan Beck (sbeck@cpan.org).
COPYRIGHT
Copyright (c) 2011-2012 Sullivan Beck
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.16.2 2012-10-11 Locale::Codes::LangFam(3pm)