yes sysad, but only have a role as root. have to su - user with role , can not su - directly , so when in the Ilom if it asks for
Root password for system maintenance (control -d to bypass) , I don't have root so my only option is to control -d.
but when I do that I am In the run level 3.
I can get a console login,
but I don't want to patch in run level 3. that could be bad.
hi,
i figured why i need to boot in MMB,some of which are missing or corrupt LABEL (LIF labeL ,i guess) on the boot disk.
To explicitly corrupt this entry i think a simple dd will work.
ok let me elaborate this issue:
i need to check this functionality.
so i have one LVM boot disk
and one... (0 Replies)
I had a power failure the other day and when my relatively new Solaris 10 machine rebooted it is thrown into maintenance mode.
I've found the following lines in the /var/adm/messages file, I'm assuming this is the root cause of the problem. However, I don't have the slightest idea on how to... (9 Replies)
Hello All,
On solaris 10 server i could see the FTP service is in maintenance mode always :mad:
Could some assist?
svcs -xv
svc:/network/nfs/nlockmgr:default (NFS lock manager)
State: maintenance since Tue 28 Jul 2009 11:47:55 AM BST
Reason: Restarting too quickly.
See: Sun... (5 Replies)
Hi,
I have installed Hudson on a Solaris 11 server, using the installation instructions available at Paul Oswald: Hudson Solaris SMF Manifest.
When I perform svcs -l hudson, I get:
fmri svc:/application/hudson:default
name Hudson Continuous Build Server
enabled true... (4 Replies)
I have a Solaris 10 SunFire v880 machine and I'm having trouble with Samba.
Samba has worked on this machine but since the machine has been re-booted Samba has not worked.
Machine details are:
cat /etc/release
Solaris 10 10/08 s10s_u6wos_07b SPARC
Copyright 2008... (2 Replies)
I have seen similar threads on this issue, but I have not seen a fix. Basically I am getting a lot of rcp bind errors. Below find the output of "svcs -xv". not sure where to begin:
# svcs -xv
svc:/network/rpc/bind:default (RPC bindings)
State: maintenance since Fri May 25 14:13:18 2012... (14 Replies)
:confused:
when i tried to look the status of DNS-client, it is in maintenance mode.....
Please tell me how to bring it back to online mode...PLEASE TELL ME STEP BY STEP.... PLEASE...
:wall: (2 Replies)
All I'm running an OpenSolaris system (Nexenta). When doing a svcs I see that/network/smb/server is in maintenance mode.
I have run a clear on the service and restarted. I see the same service show online* for a bit but then, enters maintenance every time.
In the service log I... (2 Replies)
Hi this may be a easy question to answer but thanks in advance.
So I was able to download the VIOS media from IBM and currently I am burning it to a cd/dvd right now.
The steps I've collected so far are from the net. can you please confirm and add on to the steps if there are any steps... (0 Replies)
Discussion started by: Adnans2k
0 Replies
LEARN ABOUT PLAN9
roles
roles(1) User Commands roles(1)NAME
roles - print roles granted to a user
SYNOPSIS
roles [ user ...]
DESCRIPTION
The command roles prints on standard output the roles that you or the optionally-specified user have been granted. Roles are special
accounts that correspond to a functional responsibility rather than to an actual person (referred to as a normal user).
Each user may have zero or more roles. Roles have most of the attributes of normal users and are identified like normal users in passwd(4)
and shadow(4). Each role must have an entry in the user_attr(4) file that identifies it as a role. Roles can have their own authorizations
and profiles. See auths(1) and profiles(1).
Roles are not allowed to log into a system as a primary user. Instead, a user must log in as him-- or herself and assume the role. The
actions of a role are attributable to the normal user. When auditing is enabled, the audited events of the role contain the audit ID of the
original user who assumed the role.
A role may not assume itself or any other role. Roles are not hierarchical. However, rights profiles (see prof_attr(4)) are hierarchical
and can be used to achieve the same effect as hierarchical roles.
Roles must have valid passwords and one of the shells that interprets profiles: either pfcsh, pfksh, or pfsh. See pfexec(1).
Role assumption may be performed using su(1M), rlogin(1), or some other service that supports the PAM_RUSER variable. Successful assumption
requires knowledge of the role's password and membership in the role. Role assignments are specified in user_attr(4).
EXAMPLES
Example 1: Sample output
The output of the roles command has the following form:
example% roles tester01 tester02
tester01 : admin
tester02 : secadmin, root
example%
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 An error occurred.
FILES
/etc/user_attr
/etc/security/auth_attr
/etc/security/prof_attr
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO auths(1), pfexec(1), profiles(1), rlogin(1), su(1M), getauusernam(3BSM), auth_attr(4), passwd(4), prof_attr(4), shadow(4), user_attr(4),
attributes(5)SunOS 5.10 14 Feb 2001 roles(1)