I have intall a REdhat 9.0 as a server and Ive configure to act as a DHCP however Im having technical problems b/c the file /etc/dhcpd.conf does not exists. I went to the text edit and I created :
subnet 192.192.168.100.0 netmask 255.255.255.0 {
range 192.168.100.10 192.168.100.150;... (1 Reply)
Hi,
I need to get a script together to edit the dhcp service configuration file dhcpd.conf.
Mac addresses are defined in classes ex.
class "HOST1" { match if substring (hardware, 1,18)=00:11:11:FF:FF:FF;}
class "HOST2" ...
class "HOST3" ...
...
followed by allow or deny statements:... (4 Replies)
Hi,
I've setup DHCP Server on RH linux AS3 and everything works fine except static routes. They are not getting effected on client systems.
My dhcpd.conf:
+++++++++++
ddns-update-style interim;
ddns-updates off;
option domain-name-servers 192.168.116.122;
option domain-name... (3 Replies)
HI,
I want a help for Configuring snmpd.conf and snmptrapd.conf (i.e Configuring SNMP)
for receiving
TRAPS in my networks. I am using RHEL4.0 OS.
Please tell me How I can configure above two files in a proper way and at an
advanced level.
Especially I am getting... (2 Replies)
Hi all,
I am too new for this stuff and i am lost in perl tutorials. I need help to change dhcp entries in .conf file with a perl script.
The file entries are like below :
host bertha-clp-0 {
hardware ethernet AA:0A:A0:00:6c:40;
fixed-address 10.10.10.72;
option... (6 Replies)
Hi All,
Could you please help to resolve my following issues:
Problem Description:
Suppose my user name is "MI90".
i.e. $USER = MI90
when i run below command, i get all the processes running on the system containing name MQ.
ps -ef | grep MQ
But sometimes it lists... (8 Replies)
Hello all,
Newbie here.
I'm currently tasked with updating rsyslog.conf and auditd.conf on a large set of servers. I know the exact logging configurations that I want to enable. I have updated both files on on a server and hope to use the updated files as a template for the rest of the... (3 Replies)
Hi,
I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf.
I used below to configure both settings:
# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Hi Experts,
Our DHCP server currently answers the DHCP Discover requests from ServerX. In our dhcpd.conf file there are parameters defined for ServerX.
Now we introduced some additional Servers into the network and want them to get service from the same DHCP server.
Similar configuration... (13 Replies)
Discussion started by: ekorgur
13 Replies
LEARN ABOUT FREEBSD
nos-tun
NOS-TUN(8) BSD System Manager's Manual NOS-TUN(8)NAME
nos-tun -- implement ``nos'' or ``ka9q'' style IP over IP tunnel
SYNOPSIS
nos-tun -t tunnel -s source -d destination -p protocol_number [source] target
DESCRIPTION
The nos-tun utility is used to establish an nos style tunnel, (also known as ka9q or IP-IP tunnel) using a tun(4) kernel interface.
Tunnel is the name of the tunnel device /dev/tun0 for example.
Source and destination are the addresses used on the tunnel device. If you configure the tunnel against a cisco router, use a netmask of
``255.255.255.252'' on the cisco. This is because the tunnel is a point-to-point interface in the FreeBSD end, a concept cisco does not
really implement.
Protocol number sets tunnel mode. Original KA9Q NOS uses 94 but many people use 4 on the worldwide backbone of ampr.org.
Target is the address of the remote tunnel device, this must match the source address set on the remote end.
EXAMPLES
This end, a FreeBSD box on address 192.168.59.34:
nos-tun -t /dev/tun0 -s 192.168.61.1 -d 192.168.61.2 192.168.56.45
Remote cisco on address 192.168.56.45:
interface tunnel 0
ip address 192.168.61.2 255.255.255.252
tunnel mode nos
tunnel destination 192.168.59.34
tunnel source 192.168.56.45
AUTHORS
Nickolay N. Dudorov <nnd@itfs.nsk.su> wrote the program, Poul-Henning Kamp <phk@FreeBSD.org> wrote the man-page. Isao SEKI
<iseki@gongon.com> added a new flag, IP protocol number.
BUGS
We do not allow for setting our source address for multihomed machines.
BSD April 11, 1998 BSD