Sponsored Content
Operating Systems Solaris Acessing files on Sun Storage J4200 array Post 303006807 by hicksd8 on Wednesday 8th of November 2017 06:03:25 AM
Old 11-08-2017
If the XSCF board has gone down you should be able to replace that. You'll need to power everything down to do it though.

The data on the storage array should be fine provided you don't reformat or try to write to it in any way before you reconnect it to the Sun box or replacement Sun box.

The array(s) configuration will be stored on the J4200 disks.

What version of Solaris (I assume it was running Solaris) was it running?
 

2 More Discussions You Might Find Interesting

1. Solaris

help with configuring J4200 Array

Hello All: I am trying to configure a J4200 disk array. I am a newbie. 1. I have installed CAM (Common Array Manager). 2. Upgraded the firmware. 3. Registered the array. a. As per the user guide I should see a sas-domian which I don't. b. I did not find instructions on how to setup a... (0 Replies)
Discussion started by: pingmeback
0 Replies

2. Solaris

Generic drive in a Sun Storage Array?

With a sun storage array j4200 with a failed drive. It's got 11 other drive right now running seagate's ST314655SSUN146G I'm about to replace that one drive with seagate's ST3146356SS drive. Do anyone see this as a problem to use non-Sun drives in Sun storage array or mixing the two... (9 Replies)
Discussion started by: JT-KGY
9 Replies
dualcoax(1)						      General Commands Manual						       dualcoax(1)

NAME
dualcoax - determine impedance of a coaxial structure with two concentric dielectrics. SYNOPSIS
dualcoax D1 D2 D3 Er1 Er2 DESCRIPTION
dualcoax computes the impedaance of a dualcoaxial cable, with two concentric dielectrics, given the outside diameter of the inner conductor D1, the outside diameter of the inner dielectric D2, the outside diameter of the outer dielectric (which is also the inside diameter of the outer conductor) D3, as well as the relative permttivity of the inner dielectric Er1 and the outer dielectric Er2. FILES
dualcoax does not read/write any files. SEE ALSO
atlc(1) coax(1) create_bmp_for_circ_in_circ(1) create_bmp_for_circ_in_rect(1) create_bmp_for_microstrip_coupler(1) create_bmp_for_rect_cen_in_rect(1) create_bmp_for_rect_cen_in_rect_coupler(1) create_bmp_for_rect_in_circ(1) create_bmp_for_rect_in_rect(1) create_bmp_for_stripline_coupler(1) create_bmp_for_symmetrical_stripline(1) design_coupler(1) find_optimal_dimensions_for_microstrip_coupler(1) readbin(1) http://atlc.sourceforge.net - Home page http://sourceforge.net/projects/atlc - Download area /usr/local/share/atlc/docs/html-docs/index.html - HTML docs /usr/local/share/atlc/docs/qex-december-1996/atlc.pdf - theory paper /usr/local/share/atlc/examples - examples Dr. David Kirkby atlc-4.6.0 28th Oct 2003 dualcoax(1)
All times are GMT -4. The time now is 06:01 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy