swap on /zoneroot/spahwfm1/lu type tmpfs read/write/setuid/devices/rstchown/xattr/dev=5cc000a on Tue Jul 25 05:42:07 2017
swap on /zoneroot/spahwfm1/root/etc/svc/volatile type tmpfs read/write/setuid/nodevices/rstchown/xattr/zone=spahwfm1/dev=5cc000b on Tue Jul 25 06:46:53 2017
swap on /zoneroot/spahwfm1/root/tmp type tmpfs read/write/setuid/nodevices/rstchown/xattr/zone=spahwfm1/dev=5cc000c on Tue Jul 25 06:46:56 2017
swap on /zoneroot/spahwfm1/root/var/run type tmpfs read/write/setuid/nodevices/rstchown/xattr/zone=spahwfm1/dev=5cc000d on Tue Jul 25 06:46:56 2017
Hi,
I upgraded solaris 10 x86 from update 3 to update 7 with zones installed n UFS file system . The global zone was updated but the non global zone still shows update 3 what could be the reason for this and how can i update the local zones to update 7 (0 Replies)
I have had a little issue with one of my disks, the usb cacble was pulled out and one of the external drives on it would no longer mount. I used First Aid and it verified and repaired both OK / nothing to do). After lots of messing around and not being able to mount I used Drive Genius 2 and that... (1 Reply)
:wall:I'm having a bit of a problem with Solaris 10u8 and one of our applications requesting memory and being told, "no space left".
The break down:
24GB Physical Memory
8GB swap
at the time of occurance, here's what a memory breakdown looks like:
Page Summary Pages ... (21 Replies)
I want to basically update an ABE that someone created a few months back.
I'm sure stuff has changed since it was made, and I was going to delete it and create a new one.
But from what I'm looking at, the lumake appears like it would be a faster approach.
I want to use live upgrade to... (0 Replies)
I tried a live upgrade for one my solaris 10u8 server which didnt go sucessfull and after that i now have following mounts in memory.
df: cannot statvfs /.alt.sol10u8_2/var: No such file or directory
df: cannot statvfs /.alt.sol10u8_2/var/run: No such file or directory
df: cannot statvfs... (0 Replies)
I am upgrading Solaris-9 Update-7 to Solaris-9 Update-9 through live upgrade. I am able to create another boot environment and have OS DVD inside server. But i am confused for, what command/path should I give for luupgrade.
OS DVD is mounted on /mnt
Boot environments are Solaris9old (Active now)... (2 Replies)
Hi All,
Is it possible to use external san disk for creating alternate boot environment and boot from it.My root disk is about 70 gb and i want to use external san disk for 272gb to create alternate boot environment.If this is possible can you please redirect me some good documents, i had... (1 Reply)
Hello Guys,
I am a little confused about the first step in the live upgrade process. I will be glad if someone can clarify this for me.
The pre-live upgrade patch, when do you add this patch to the OS you want to upgrade?
1. before creating the new boot environment? or
2. after creating... (1 Reply)
Hi all ,
I have issue oracle filesystem name /oracle/SID unable to unmount even though no any process are running mentioned fs .would appreciate anyone assist further high level .my system running aix 6.1 (7 Replies)
Discussion started by: Arulji
7 Replies
LEARN ABOUT DEBIAN
kumoctl
KUMOCTL(1) General Commands Manual KUMOCTL(1)NAME
kumoctl - show kumofs status
SYNOPSIS
kumoctl address[:port=19750] command [options]
DESCRIPTION
Show status of kumo-manager and send control commands to kumo-manager.
COMMANDS
status show status of the cluster
attach attach all new servers and start replace
attach-noreplace
attach all new servers
detach detach all fault servers and start replace
detach-noreplace
detach all fault servers
replace
start replace without attach/detach
full-replace
start full-replace (repair consistency)
backup [suffix=20090304]
create backup with specified suffix
enable-auto-replace
enable auto replace
disable-auto-replace
disable auto replace
STATUS
hash space timestamp
The time that the list of attached kumo-servers is updated. It is updated when new kumo-server is added or existing kumo-server is
down.
attached node
The list of attached kumo-servers. (active) is normal node and (fault) is fault node or recoverd but not re-attached node.
not attached node
The list of recognized but not-attached nodes.
AUTO REPLACING
By default, you have to attach new kumo-servers manually using kumoctl command. If the auto replacing is enabled, new kumo-servers are
attached automatically. This is experimental feature.
EXAMPLE
$ kumoctl mgr1 status
$ kumoctl mgr1 attach
SEE ALSO kumo-manager(1).
kumoctl July 2009 KUMOCTL(1)