10-25-2017
M5000 Xscf
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might look for, that I hmay ave missed before I have to drive to the server, its quite far. I may have to trace cables, ports etc...
nic is up
can ping the gateway on the sub net, but being a console port, it doesn't show up in the OS.
any ideas would be much appreciated.
10 More Discussions You Might Find Interesting
1. Solaris
While entering to service mode on XSCF i getting following error
XSCF> service
Account is not enabled for service mode.
What could be the reason for this ? (5 Replies)
Discussion started by: fugitive
5 Replies
2. Solaris
Hi all
A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains.
It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays.
Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb.... (9 Replies)
Discussion started by: sbk1972
9 Replies
3. Solaris
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
Discussion started by: aixlover
3 Replies
4. Solaris
Hi,
I've updated a few M3000s to new firmware without any hassle, but on one of them the following is happening:
XSCF> getflashimage -u wayner ftp://10.16.122.200/tftpboot/IKXCP1102.tar.gz
Error: insufficient free space
Any idea how to delete whatever old firmware is on there so I can... (7 Replies)
Discussion started by: cabaiste
7 Replies
5. Solaris
Hi,
I've configured this Sun M5000 to use two system domains (added a second domain to it). The following is the info about the settings. The showdevices command can't show devices on domain 1 because Solaris is not loaded on it yet.
My question: How can I confirm the hardware devices such as... (5 Replies)
Discussion started by: aixlover
5 Replies
6. Emergency UNIX and Linux Support
Hi All,
I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me
-> show /SP/users/root
/SP/users/root
Targets:
ssh
Properties:
role... (1 Reply)
Discussion started by: solaris_1977
1 Replies
7. Solaris
Hi,
I would appreciate some help.
I remotely access, across a VPN, an M5000 and when I connect to the XSCF I can then access the OS using console -d0 and then I can get to the console.
The problem I have is that I need to run something which will take many hours and I can't run it in the... (6 Replies)
Discussion started by: giles.cardew
6 Replies
8. Solaris
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)
Discussion started by: soupbone38
2 Replies
9. Solaris
Hi,
I'm planning to upgrade the XSCF firmware on an M5000, and have a question regarding the OBP part of the upgrade. At the moment, the system looks like this:
XCP0 (Current): 1100
OpenBoot PROM : 02.18.0000
XSCF : 01.10.0000
root@server01 # /usr/sbin/prtconf -V
OBP 4.24.15... (3 Replies)
Discussion started by: badoshi
3 Replies
10. Solaris
Hi all,
I understand SP is a separate processor use for management purposes.
I understand XSCF is the management facility (similar to IDRAC, ILOM etc).
I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it.
I am able to use... (4 Replies)
Discussion started by: javanoob
4 Replies
LEARN ABOUT DEBIAN
connect-proxy
CONNECT-PROXY(1) General Commands Manual CONNECT-PROXY(1)
NAME
connect-proxy -- connect over SOCKS4/5 proxy
SYNOPSIS
connect-proxy [-dnhst45] [-R resolve ] [-p local-port ] [-w secs ] [-H [user@]proxy-server[:port]] ] [-S [user@]socks-server[:port]] ]
[-T proxy-server[:port] ] [-c telnet-proxy-command ] [host] [port]
DESCRIPTION
connect-proxy open connection over SOCKS4/5 proxies
Please, note that any HTTP-Proxy tunnel won't work with content-inspection firewall (unless using SSL).
OPTIONS
-H specifies a hostname and port number of the http proxy server to relay. If port is omitted, 80 is used. You can specify this
value in the environment variable HTTP_PROXY and pass the -h option to use it.
-S specifies the hostname and port number of the SOCKS server to relay. Like -H, port number can be omitted and the default is
1080. You can also specify this value pair in the environment variable SOCKS5_SERVER and give the -s option to use it.
-4 specifies SOCKS relaying and indicates protocol version to use. It is valid only when used with '-s' or '-S'. Default is '-5'
(protocol version 5)
-R method to resolve the hostname. Three keywords ("local", "remote", "both") or dot-notation IP address are acceptable. The key-
word "both" means, "Try local first, then remote". If a dot-notation IP address is specified, use this host as nameserver. The
default is "remote" for SOCKS5 or "local" for others. On SOCKS4 protocol, remote resolving method ("remote" and "both") requires
protocol 4a supported server.
-p will forward a local TCP port instead of using the standard input and output.
-P same to '-p' except keep remote session. The program repeats waiting the port with holding remote session without disconnecting.
To connect the remote session, send EOF to stdin or kill the program.
-w timeout in seconds for making connection with TARGET host.
-d used for debug. If you fail to connect, use this and check request to and response from server.
USAGE
To use proxy, this example is for SOCKS5 connection to connect to "host" at port 25 via SOCKS5 server on "firewall" host.
connect-proxy -S firewall host 25
SOCKS5_SERVER=firewall; export SOCKS5_SERVER; connect-proxy -s host 25
For a HTTP-PROXY connection:
connect-proxy -H proxy-server:8080 host 25
HTTP_PROXY=proxy-server:8080; export HTTP_PROXY; connect-proxy -h host 25
To forward a local port, for example to use ssh:
connect-proxy -p 5550 -H proxy-server:8080 host 22 ssh -l user
To use it along ssh transparently:
# file://~/.ssh/config
# not using proxy on lan
Host 192.*
ProxyCommand connect-proxy %h %p
# mandatory to access the internet
Host *
ProxyCommand connect-proxy -H proxyserver:8080 %h %p
Or for all users ( /etc/ssh/ssh_config )
ENVIRONMENT
SOCKS5_USER, SOCKS5_PASSWORD, HTTP_PROXY_USER, HTTP_PROXY_PASSWORD, CONNECT_PASSWORD, LOGNAME, USER
SEE ALSO
ssh (1).
WWW
http://www.meadowy.org/~gotoh/projects/connect
AUTHOR
This manual page was written by Philippe Coval rzr@gna.org for the Debian system (but may be used by others). Permission is granted to
copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by
the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
CONNECT-PROXY(1)