10-25-2017
M5000 Xscf
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might look for, that I hmay ave missed before I have to drive to the server, its quite far. I may have to trace cables, ports etc...
nic is up
can ping the gateway on the sub net, but being a console port, it doesn't show up in the OS.
any ideas would be much appreciated.
10 More Discussions You Might Find Interesting
1. Solaris
While entering to service mode on XSCF i getting following error
XSCF> service
Account is not enabled for service mode.
What could be the reason for this ? (5 Replies)
Discussion started by: fugitive
5 Replies
2. Solaris
Hi all
A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains.
It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays.
Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb.... (9 Replies)
Discussion started by: sbk1972
9 Replies
3. Solaris
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
Discussion started by: aixlover
3 Replies
4. Solaris
Hi,
I've updated a few M3000s to new firmware without any hassle, but on one of them the following is happening:
XSCF> getflashimage -u wayner ftp://10.16.122.200/tftpboot/IKXCP1102.tar.gz
Error: insufficient free space
Any idea how to delete whatever old firmware is on there so I can... (7 Replies)
Discussion started by: cabaiste
7 Replies
5. Solaris
Hi,
I've configured this Sun M5000 to use two system domains (added a second domain to it). The following is the info about the settings. The showdevices command can't show devices on domain 1 because Solaris is not loaded on it yet.
My question: How can I confirm the hardware devices such as... (5 Replies)
Discussion started by: aixlover
5 Replies
6. Emergency UNIX and Linux Support
Hi All,
I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me
-> show /SP/users/root
/SP/users/root
Targets:
ssh
Properties:
role... (1 Reply)
Discussion started by: solaris_1977
1 Replies
7. Solaris
Hi,
I would appreciate some help.
I remotely access, across a VPN, an M5000 and when I connect to the XSCF I can then access the OS using console -d0 and then I can get to the console.
The problem I have is that I need to run something which will take many hours and I can't run it in the... (6 Replies)
Discussion started by: giles.cardew
6 Replies
8. Solaris
Trying to update my M5000 firmware. trying to mount my USB to upload firmware and getting the following message.
XSCF> getflashimage -v file:///media/usb_msd/FFXCP1115.tar.gz
Free space: 97MB
Making sure mount point is clear
umount: /media/usb_msd is not mounted (according to mtab)
Trying... (2 Replies)
Discussion started by: soupbone38
2 Replies
9. Solaris
Hi,
I'm planning to upgrade the XSCF firmware on an M5000, and have a question regarding the OBP part of the upgrade. At the moment, the system looks like this:
XCP0 (Current): 1100
OpenBoot PROM : 02.18.0000
XSCF : 01.10.0000
root@server01 # /usr/sbin/prtconf -V
OBP 4.24.15... (3 Replies)
Discussion started by: badoshi
3 Replies
10. Solaris
Hi all,
I understand SP is a separate processor use for management purposes.
I understand XSCF is the management facility (similar to IDRAC, ILOM etc).
I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it.
I am able to use... (4 Replies)
Discussion started by: javanoob
4 Replies
LEARN ABOUT SUSE
ssh-keysign
SSH-KEYSIGN(8) BSD System Manager's Manual SSH-KEYSIGN(8)
NAME
ssh-keysign -- ssh helper program for host-based authentication
SYNOPSIS
ssh-keysign
DESCRIPTION
ssh-keysign is used by ssh(1) to access the local host keys and generate the digital signature required during host-based authentication with
SSH protocol version 2.
ssh-keysign is disabled by default and can only be enabled in the global client configuration file /etc/ssh/ssh_config by setting
EnableSSHKeysign to ``yes''.
ssh-keysign is not intended to be invoked by the user, but from ssh(1). See ssh(1) and sshd(8) for more information about host-based authen-
tication.
FILES
/etc/ssh/ssh_config
Controls whether ssh-keysign is enabled.
/etc/ssh/ssh_host_dsa_key, /etc/ssh/ssh_host_rsa_key
These files contain the private parts of the host keys used to generate the digital signature. They should be owned by root, read-
able only by root, and not accessible to others. Since they are readable only by root, ssh-keysign must be set-uid root if host-
based authentication is used.
SEE ALSO
ssh(1), ssh-keygen(1), ssh_config(5), sshd(8)
HISTORY
ssh-keysign first appeared in OpenBSD 3.2.
AUTHORS
Markus Friedl <markus@openbsd.org>
BSD
May 31, 2007 BSD