Df reporting double size of du after fsck & reboot
Solaris 8
running on a Sparcstation 5 (Aurora) with 170MHz processor and 256MB ram
This is AFTER doing fsck and reboot.
820030k vs 385252k
All other files in /usr/asm not in /usr/asm/sys or /usr/asm/data amount to 43k. The /usr/asm/lost+found is 8k. somehow df and other applications flagging for disk full are seeing an extra 400000k, where is this?
this is run as superuser, so all hidden files should be shown right?
I have several questions here, would like to confirm with. First why in Linux everytime let say i boot up around nearly to a month i got a message during the Services Loading such as "FSCK havent run for 29 days performing fsck ".
Is there to disable it? Why beacause i want to run it mannualy,... (2 Replies)
Hi all,
Thanks to Merlin & Djtrippin for comments in another thread.
Does anyone know of any issues with harddrive size and Mandrake 9.0? I have installed Mandrake (like a dream) on a 10gb drive but it refuses to go beyond the partition check on my 80gb unit. The 80 is new and I have... (5 Replies)
I have a system that upon boot, will declare a bad trap and reboot, whereupon it encounters the same bad trap and reboots in an endless cycle until I stop it. I can get to the ok prompt. An attempt to boot in single user mode left the box completely hung and required a power cycle to re-establish... (3 Replies)
I need to find to find duplicate lines in a document and then print the line numbers of the duplicates
The files contain multiple lines with about 100 numbers on each line I need something that will output the line numbers where duplicates were found ie 1=5=7, 2=34=76
Any suggestions would be... (5 Replies)
Dear Gurus,
I would like to know if fsck is executed automatically during reboot for AIX?
Is there any logs which I can refer to? or any documentation reference for this?
Thank You. (2 Replies)
Could you please help with problem with megaraid controller and Dell PowerEdge 2850, all that I can see on thi screenshot:
All drives successfuly passed verifing from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue llive cd and mount all the morrored drives and check... (22 Replies)
So I was patching a Solaris 10 U08 X86 X2200 box in preparation for an Oracle upgrade. Rebooted the box because the patches failed and the box will not boot successfully. I need to back up the zones on the 2 drives before going further. I pulled the drives and attempted to mount them on my Ubuntu... (0 Replies)
What can I fix this issue? I have ran below commands but everything is same.:confused:
WARNING: Last shutdown is later than time on time-of-day chip: check date.
The / file system (/dev/rdsk/c1t0d0s0) is being checked
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F... (4 Replies)
I have been searching both on Unix.com and Google and have not been able to find the answer to my question. I think it is partly because I can't come up with the right search terms.
Recently, my virtual server switched storage devices and I think the problem may be related to that change.... (2 Replies)
Discussion started by: jmgibby
2 Replies
LEARN ABOUT OSF1
reboot
reboot(2) System Calls Manual reboot(2)NAME
reboot - Reboots system or halts processor
SYNOPSIS
#include <sys/reboot.h>
void reboot( int howto );
PARAMETERS
Specifies a mask of options.
DESCRIPTION
The reboot() function restarts the system. The startup is automatic and brings up /vmunix in the normal, nonmaintenance mode. The calling
process must have superuser privilege to run this function successfully. However, a reboot is invoked automatically in the event of unre-
coverable system failures.
The following options, defined in the sys/reboot.h include file are passed to the new kernel or the new bootstrap and init programs. They
are supplied as values to the howto parameter. The default, causing the system to reboot in its usual fashion. Dump kernel memory before
rebooting; see the savecore command for more information. The processor is simply halted; no reboot takes place. The disks are not sync'd
before the processor is halted or rebooted. Normally, the disks are sync'd (see the sync() command) before the processor is halted or
rebooted. Because the disks are not sync'd with the RB_NOSYNC option, loss of data may result from using it.
When no options are given (that is, RB_AUTOBOOT is used), the system is rebooted from file vmunix in the root file system of unit 0 (zero)
of a disk chosen in a processor-specific way. (see the fsck command).
RETURN VALUES
If successful, this call does not return. Otherwise, a -1 is returned and errno is set to indicate the error.
ERRORS
If the reboot() function fails, errno may be set to the following value: The calling process does not have appropriate privilege.
RELATED INFORMATION
Commands: crashdc(8),
halt(8), init(8), reboot(8), savecore(8) delim off
reboot(2)