Silly questions it may seem but I had a lot of HP years ago ( and strange issues)...
- Do all the HP boxes have their peer HP defined in /etc/hosts?
- what do you have in /etc/nsswitch.conf and /etc/resolv.conf ?
Note all the HP boxes have their peer HP defined in /etc/hosts.
---------- Post updated at 02:51 PM ---------- Previous update was at 02:50 PM ----------
Quote:
Originally Posted by hicksd8
I'm obviously still confused about this one but still convinced this is a network issue.
In your last post you said.................
Surely that means that if 'intabck' is trying to reach any address starting 10.1. it will route to gateway 10.1.2.8 which I guess is your internet gateway, and NOT treat it as if 10.1.2.82 is on the local subnet. Yes?
Please can any ip/networking expert/moderator reading this tell me whether I'm right or wrong because I'm doubting myself here which is very rare.
---------- Post updated at 08:37 AM ---------- Previous update was at 08:33 AM ----------
I said many posts back that the 'showmount' command telling you that /public NFS handle was on 10.1.2.8 was not right.
10.1.2.8 is not a gateway, it is its own ip
The /public is on the Suse server with ip 10.1.2.82 and on the local subnet.
Linux OS : Fedora 10 (No graphical mode)
Windows OS : XP and Windows Server NT
I am able to access from my windows to linux using following step
//fedora10 ip
username of admin and password
I am able to view the admin and shared printer of fedora 10.
When i try to enter in the admin... (0 Replies)
Hi
I am using red hat linux, In my folder a strange folder is created i.e. " -a " , folder name is preceded with hyphen. Now if i try to remove with rm -rf -1 , i am unable to do it.
Can anyone please let me know how to do it, & what this kind of folder means
Thanks
Sarbjit (3 Replies)
Hi,
I am using redhat linux 5.1 - 64bit,
using command
mount -t cifs //192.192.192.192/SW/Ex /192.192.192.192 -o username=test
I am getting below error.
mount: block device //192.192.192.192/SW/Ex is write-protected, mounting read-only
mount: cannot mount block device... (3 Replies)
Hello Gurus!!
Very recently i tried to mount a USB pen drive onto my solaris 10 (X4170 model) server. As i understand, in ideal scenarios it should get mounted automatically, but it did not happen. Neither anything is shown in "iostat -En" output or "rmformat -l" about the pen drive.
I also... (10 Replies)
Hi All,
One job in unix server will generate .csv files daily. I need to copy the latest of these .csv file from the unix server to the shared drive/folder in windows through unix script. My shared folder will look something like
W:\some folder(for example). Could any one of you please help... (3 Replies)
We would be migrating unix solaries to Linux redhat.
Basically source is unix and target is linux.
i would like to copy entire file system unix/source/* to target linux/souce/*
but target linux has only folder setup so what ever files copied need to be placed in the linux server with same... (8 Replies)
Hi,
I followed this procedure in order to mount in AIX a shared folder in windows server 2000.
https://www-304.ibm.com/support/docview.wss?uid=isg3T1012550
Ive tested the shared folder from other windows Server, and its fine.
What Ive do in AIX is:
Logon as root
Under /Home/spss/ I... (2 Replies)
Hi everyone,
have a good day to you.
I am trying to use NFS to share a folder between 2 linux systems.
Let's say the server which is sharing the folder is server A and the client which need to access this shared folder is server B.
In server B, i am having a Joe user which UID and GID is 500.... (1 Reply)
Discussion started by: michael_hoang
1 Replies
LEARN ABOUT REDHAT
host.conf
HOST.CONF(5) Linux System Administration HOST.CONF(5)NAME
host.conf - resolver configuration file
DESCRIPTION
The file /etc/host.conf contains configuration information specific to the resolver library. It should contain one configuration keyword
per line, followed by appropriate configuration information. The keywords recognized are order, trim, multi, nospoof, and reorder. These
keywords are described below.
order This keyword specifies how host lookups are to be performed. It should be followed by one or more lookup methods, separated by com-
mas. Valid methods are bind, hosts, and nis.
trim This keyword may be listed more than once. Each time it should be followed by a single domain name, with the leading dot. When
set, the resolv+ library will automatically trim the given domain name from the end of any hostname resolved via DNS. This is
intended for use with local hosts and domains. (Related note: trim will not affect host- names gathered via NIS or the hosts file.
Care should be taken to ensure that the first hostname for each entry in the hosts file is fully qualified or non-qualified, as
appropriate for the local installation.)
multi Valid values are on and off. If set to on, the resolv+ library will return all valid addresses for a host that appears in the
/etc/hosts file, instead of only the first. This is off by default, as it may cause a substantial performance loss at sites with
large hosts files.
nospoof
Valid values are on and off. If set to on, the resolv+ library will attempt to prevent hostname spoofing to enhance the security of
rlogin and rsh. It works as follows: after performing a host address lookup, resolv+ will perform a hostname lookup for that
address. If the two hostnames do not match, the query will fail.
spoofalert
If this option is set to on and the nospoof option is also set, resolv+ will log a warning of the error via the syslog facility.
The default value is off.
reorder
Valid values are on and off. If set to on, resolv+ will attempt to reorder host addresses so that local addresses (i.e., on the
same subnet) are listed first when a gethostbyname(3) is performed. Reordering is done for all lookup methods. The default value
is off.
FILES
/etc/host.conf
Resolver configuration file
/etc/resolv.conf
Resolver configuration file
/etc/hosts
Local hosts database
SEE ALSO gethostbyname(3), hostname(7), resolv+(8), named(8)Debian GNU/Linux 1997-01-02 HOST.CONF(5)