Silly questions it may seem but I had a lot of HP years ago ( and strange issues)...
- Do all the HP boxes have their peer HP defined in /etc/hosts?
- what do you have in /etc/nsswitch.conf and /etc/resolv.conf ?
Note all the HP boxes have their peer HP defined in /etc/hosts.
---------- Post updated at 02:51 PM ---------- Previous update was at 02:50 PM ----------
Quote:
Originally Posted by hicksd8
I'm obviously still confused about this one but still convinced this is a network issue.
In your last post you said.................
Surely that means that if 'intabck' is trying to reach any address starting 10.1. it will route to gateway 10.1.2.8 which I guess is your internet gateway, and NOT treat it as if 10.1.2.82 is on the local subnet. Yes?
Please can any ip/networking expert/moderator reading this tell me whether I'm right or wrong because I'm doubting myself here which is very rare.
---------- Post updated at 08:37 AM ---------- Previous update was at 08:33 AM ----------
I said many posts back that the 'showmount' command telling you that /public NFS handle was on 10.1.2.8 was not right.
10.1.2.8 is not a gateway, it is its own ip
The /public is on the Suse server with ip 10.1.2.82 and on the local subnet.
Linux OS : Fedora 10 (No graphical mode)
Windows OS : XP and Windows Server NT
I am able to access from my windows to linux using following step
//fedora10 ip
username of admin and password
I am able to view the admin and shared printer of fedora 10.
When i try to enter in the admin... (0 Replies)
Hi
I am using red hat linux, In my folder a strange folder is created i.e. " -a " , folder name is preceded with hyphen. Now if i try to remove with rm -rf -1 , i am unable to do it.
Can anyone please let me know how to do it, & what this kind of folder means
Thanks
Sarbjit (3 Replies)
Hi,
I am using redhat linux 5.1 - 64bit,
using command
mount -t cifs //192.192.192.192/SW/Ex /192.192.192.192 -o username=test
I am getting below error.
mount: block device //192.192.192.192/SW/Ex is write-protected, mounting read-only
mount: cannot mount block device... (3 Replies)
Hello Gurus!!
Very recently i tried to mount a USB pen drive onto my solaris 10 (X4170 model) server. As i understand, in ideal scenarios it should get mounted automatically, but it did not happen. Neither anything is shown in "iostat -En" output or "rmformat -l" about the pen drive.
I also... (10 Replies)
Hi All,
One job in unix server will generate .csv files daily. I need to copy the latest of these .csv file from the unix server to the shared drive/folder in windows through unix script. My shared folder will look something like
W:\some folder(for example). Could any one of you please help... (3 Replies)
We would be migrating unix solaries to Linux redhat.
Basically source is unix and target is linux.
i would like to copy entire file system unix/source/* to target linux/souce/*
but target linux has only folder setup so what ever files copied need to be placed in the linux server with same... (8 Replies)
Hi,
I followed this procedure in order to mount in AIX a shared folder in windows server 2000.
https://www-304.ibm.com/support/docview.wss?uid=isg3T1012550
Ive tested the shared folder from other windows Server, and its fine.
What Ive do in AIX is:
Logon as root
Under /Home/spss/ I... (2 Replies)
Hi everyone,
have a good day to you.
I am trying to use NFS to share a folder between 2 linux systems.
Let's say the server which is sharing the folder is server A and the client which need to access this shared folder is server B.
In server B, i am having a Joe user which UID and GID is 500.... (1 Reply)
Discussion started by: michael_hoang
1 Replies
LEARN ABOUT MINIX
resolvxc
RESOLV.CONF(5) File Formats Manual RESOLV.CONF(5)NAME
resolv.conf - Domain Name System resolver configuration
SYNOPSIS
/etc/resolv.conf
DESCRIPTION
The /etc/resolv.conf is used to configure how the host will use the Domain Name System to resolve hostnames to IP addresses. It may con-
tain these two lines:
nameserver IP-address
domain domain-name
The nameserver entry tells the IP address of the host to use for DNS queries. If it is set to 127.0.0.1 (which is the default) then the
local name daemon is used that may use the /etc/hosts database to translate host names. You normally only need a nameserver entry if the
name server is at the other side of a router. The default nonamed name server can't look beyond the local network.
The domain entry tells the default domain to use for unqualified hostnames. This entry is usually not given in which case the domain of
the local host is used.
The long version of this story can be found in resolver(5).
FILES
/etc/resolv.conf DNS resolver configuration file.
SEE ALSO resolver(5), hosts(5), nonamed(8), boot(8).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
RESOLV.CONF(5)