I want to write a server application that would accept HTTP requests from client.
The server would be on a machine that has no connection to the INTERNET.
The clients that would be posting their HTTP requests would be doing so through webbrowser .Thus it would be sort of intranet application.... (0 Replies)
Hello Mentors!
I am a new here in the furom, i hope somebody can understand my problem.
Basically we have an application here called unigraphics and being installed per station and the setup is look like this.
1. installed unigraphics UGNX3 version on every station
2. some are installed in... (1 Reply)
Hello
im using sunos im trying to lock down application that taking my port
when Im doing "netstat -in | grep 8080"
Is gives me the indication that the port is taken but no indication who is taken the port.
How can I find out who is taking my port?
Thanks allot (7 Replies)
Dear Sir,
i m going to use NP5610-16 moxa device for multiport serial communication.
i m using fedora-core 6 o.s.
after installation it will detect serial ports as /dev/ttyr0,/dev/ttyr1...ttyr32.
there are total 32 com ports.
now i want to write application which monitor all serial ports and... (6 Replies)
Hi All,
I have two MQ (port) 1414 established (going out)
$ netstat -an | grep 1414
tcp 0 0 0.0.0.0:1414 0.0.0.0:* LISTEN
tcp 0 0 20.76.1.1:32855 142.8.1.3:1414 ESTABLISHED
tcp 0 0... (2 Replies)
Hi,
is there any command to findout that which application is using the particular port.
or whether any port is occupied with the specfic process id ? (4 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT DEBIAN
wdmd
WDMD(8) System Manager's Manual WDMD(8)NAME
wdmd - watchdog multiplexing daemon
SYNOPSIS
wdmd [OPTIONS]
DESCRIPTION
This daemon opens /dev/watchdog and allows multiple independent sources to detmermine whether each KEEPALIVE is done. Every test interval
(10 seconds), the daemon tests each source. If any test fails, the KEEPALIVE is not done. In a standard configuration, the watchdog timer
will reset the system if no KEEPALIVE is done for 60 seconds ("fire timeout"). This means that if single test fails 5-6 times in row, the
watchdog will fire and reset the system. With multiple test sources, fewer separate failures back to back can also cause a reset, e.g.
T seconds, P pass, F fail
T00: test1 P, test2 P, test3 P: KEEPALIVE done
T10: test1 F, test2 F, test3 P: KEEPALIVE skipped
T20: test1 F, test2 P, test3 P: KEEPALIVE skipped
T30: test1 P, test2 F, test3 P: KEEPALIVE skipped
T40: test1 P, test2 P, test3 F: KEEPALIVE skipped
T50: test1 F, test2 F, test3 P: KEEPALIVE skipped
T60: test1 P, test2 F, test3 P: KEEPALIVE skipped
T60: watchdog fires, system resets
(Depending on timings, the system may be reset sometime shortly before T60, and the tests at T60 would not be run.)
A crucial aspect to the design and function of wdmd is that if any single source does not pass tests for the fire timeout, the watchdog is
guaranteed to fire, regardless of whether other sources on the system have passed or failed. A spurious reset due to the combined effects
of multiple failing tests as shown above, is an accepted side effect.
wdmd will exit if a watchdog driver is not loaded.
wdmd cannot be used on the system with any other program that needs to open /dev/watchdog, e.g. watchdog(8).
Test Source: clients
Using libwdmd, programs connect to wdmd via a unix socket, and send regular messages to wdmd to update an expiry time for their connection.
Every test interval, wdmd will check if the expiry time for a connection has been reached. If so, the test for that client fails.
(Other test sources such as scripts executed each test interval may be added in the future.)
OPTIONS -D Enable debugging to stderr and don't fork.
-H num Enable (1) or disable (0) high priority features such as realtime scheduling priority and mlockall.
Default 1.
2011-08-01 WDMD(8)